36 replies to this topic

[marcy919]

Hi everyone apologize for my english, then I put openpli 6.0 to last 4k
and with iptv when changing the channel the decoder stops and continues to rotate the wheel, the only solution is to turn off the decoder from the posterior button this problem only does with vu last 4k. instead on vu + duo2 and vu + nzero everything ok.menter with the last 4k it is impossible to use iptv, can you solve it? Thank you

[WanWizard]

The current 4K drivers are quite fragile. We are in discussion with VU+ to get these improved. There were new drivers released yesterday, they are currently being tested.

[marcy919]

hello wan are there any news on drivers for vu last? Iptv still has trouble blocking the channel change? thank you

[marcy919]

Good morning I uploaded the new image with fairy 05.11.2017 thinking that the problem was solved but the problem was not solved with iptv there is still the channel change the decoder locks with the rotating wheel that needs to turn off from behind would be useful post new image after fixing the problem

[WanWizard]

What is yout definition of "IPTV"?

 

If you have a continues spinner, log in using telnet, issue the command

dmesg

and post the last page of the output here so we can see if there are any errors.

[marcy919]

openpli 6.0-release vuultimo4k

vuultimo4k login: root
root@vuultimo4k:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.28-1.12 (build@bouwserver2) (gcc version 6.2.0 (GCC) ) #1 SMP Fri Oct 13 22:30:03 CEST 2017
[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: ULTIMO4K
[    0.000000] moving dtb from 0x0000000007628000 to 0x0000000000844510
[    0.000000] bmem: Reserved 624 MiB at 0x0000000019000000
[    0.000000] bmem: Reserved 384 MiB at 0x0000000068000000
[    0.000000] bmem: Reserved 697 MiB at 0x0000000093700000
[    0.000000] cma: Reserved 16 MiB at 0x0000000017800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 786432
[    0.000000]   Normal zone: 784 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 100352 pages, LIFO batch:31
[    0.000000]   HighMem zone: 5360 pages used for memmap
[    0.000000]   HighMem zone: 686080 pages, LIFO batch:31
[    0.000000] MCP: Enabling write pairing
[    0.000000] PERCPU: Embedded 8 pages/cpu @d5fb0000 s8768 r8192 d15808 u32768
[    0.000000] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 785648
[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=616m bmem=624m@400m bmem=384m@1664m bmem=697m@2359m
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 1345528K/3145728K available (5764K kernel code, 332K rwdata, 1888K rodata, 252K init, 188K bss, 1783816K reserved, 16384K cma-reserved, 994292K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd9000000 - 0xff000000   ( 608 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd8800000   ( 392 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07814c4   (7654 kB)
[    0.000000]       .init : 0xc0782000 - 0xc07c1240   ( 253 kB)
[    0.000000]       .data : 0xc07c2000 - 0xc0815398   ( 333 kB)
[    0.000000]        .bss : 0xc08153a0 - 0xc0844510   ( 189 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 94)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 96)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 48)
[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
[    0.000009] Switching to timer-based delay loop
[    0.000278] Console: colour dummy device 80x30
[    0.000299] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[    0.000307] pid_max: default: 32768 minimum: 301
[    0.000406] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000411] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.005724] CPU: Testing write buffer coherency: ok
[    0.005918] CPU0: update cpu_power 1024
[    0.005924] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.006065] Setting up static identity map for 0x5802a0 - 0x5802f8
[    0.008455] CPU1: Booted secondary processor
[    0.008471] CPU1: update cpu_power 1024
[    0.008474] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.009122] CPU2: Booted secondary processor
[    0.009133] CPU2: update cpu_power 1024
[    0.009136] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.009751] CPU3: Booted secondary processor
[    0.009763] CPU3: update cpu_power 1024
[    0.009766] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.009848] Brought up 4 CPUs
[    0.009864] SMP: Total of 4 processors activated.
[    0.009869] CPU: All CPU(s) started in SVC mode.
[    0.010220] devtmpfs: initialized
[    0.013779] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[    0.014758] regulator-dummy: no parameters
[    0.014948] NET: Registered protocol family 16
[    0.017076] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.017879] cpuidle: using governor ladder
[    0.017885] cpuidle: using governor menu
[    0.021045] irq: no irq domain found for /rdb/interrupt-controller@f040a780 !
[    0.021199] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
[    0.025085] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 !
[    0.025359] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040451b] registered
[    0.026125] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
[    0.026283] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
[    0.026427] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
[    0.026566] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
[    0.026719] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
[    0.026857] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
[    0.027008] syscon f1201004.syscon: regmap [mem 0xf1201004-0xf1201403] registered
[    0.027139] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
[    0.027284] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
[    0.027421] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
[    0.027568] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
[    0.027768] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
[    0.028335] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
[    0.028877] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
[    0.029029] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
[    0.029334] No ATAGs?
[    0.029352] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.029357] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.029486] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
[    0.044600] bio: create slab <bio-0> at 0
[    0.045317] SCSI subsystem initialized
[    0.045527] libata version 3.00 loaded.
[    0.046135] usbcore: registered new interface driver usbfs
[    0.046213] usbcore: registered new interface driver hub
[    0.046315] usbcore: registered new device driver usb
[    0.046450] Linux video capture interface: v2.00
[    0.046659] pps_core: LinuxPPS API ver. 1 registered
[    0.046663] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.046716] PTP clock support registered
[    0.047250] Advanced Linux Sound Architecture Driver Initialized.
[    0.047985] cfg80211: Calling CRDA to update world regulatory domain
[    0.048449] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
[    0.048622] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
[    0.148910] brcm-pci f0460000.pcie: link down
[    0.248972] brcm-pci f0490000.pcie: link down
[    0.249025] Switched to clocksource arch_sys_counter
[    0.249211] FS-Cache: Loaded
[    0.258504] thermal thermal_zone0: failed to read out thermal zone 0
[    0.258595] NET: Registered protocol family 2
[    0.258989] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.259030] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.259074] TCP: Hash tables configured (established 4096 bind 4096)
[    0.259140] TCP: reno registered
[    0.259148] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.259160] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.259277] NET: Registered protocol family 1
[    0.259464] RPC: Registered named UNIX socket transport module.
[    0.259469] RPC: Registered udp transport module.
[    0.259472] RPC: Registered tcp transport module.
[    0.259476] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.259482] PCI: CLS 0 bytes, default 64
[    0.259729] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[    0.260995] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.261767] bounce pool size: 64 pages
[    0.262250] NFS: Registering the id_resolver key type
[    0.262279] Key type id_resolver registered
[    0.262284] Key type id_legacy registered
[    0.262294] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.262299] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.262630] fuse init (API version 7.22)
[    0.262779] msgmni has been set to 718
[    0.263471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.263479] io scheduler noop registered
[    0.263484] io scheduler deadline registered
[    0.263505] io scheduler cfq registered (default)
[    0.263720] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
[    0.294443] brcm-waketimer f0417580.waketimer: registered, with irq 260
[    0.294716] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.296114] f040ab00.serial: ttyS0 at MMIO 0xf040ab00 (irq = 107, base_baud = 5062500) is a 16550A
[    1.116597] console [ttyS0] enabled
[    1.120490] f040ab40.serial: ttyS1 at MMIO 0xf040ab40 (irq = 108, base_baud = 5062500) is a 16550A
[    1.129838] f040ab80.serial: ttyS2 at MMIO 0xf040ab80 (irq = 109, base_baud = 5062500) is a 16550A
[    1.142369] loop: module loaded
[    1.146134] ahci brcmstb-ahci.0: can't get clock
[    1.150843] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
[    1.168037] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.176668] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
[    1.186309] scsi0 : ahci_platform
[    1.189959] scsi1 : ahci_platform
[    1.193516] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 62
[    1.201450] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 62
[    1.210640] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
[    1.217037] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
[    1.224355] m25p80 spi32766.0: found mx25l3255e, expected m25p80
[    1.230380] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
[    1.235638] 5 ofpart partitions found on MTD device spi32766.0
[    1.241482] Creating 5 MTD partitions on "spi32766.0":
[    1.246635] 0x000000000000-0x000000200000 : "flash0.bolt"
[    1.252723] 0x000000200000-0x000000210000 : "flash0.macadr"
[    1.258941] 0x000000210000-0x000000220000 : "flash0.nvram"
[    1.265087] 0x000000220000-0x000000230000 : "flash0.devtree"
[    1.271394] 0x000000000000-0x000000400000 : "flash0"
[    1.278079] libphy: Fixed MDIO Bus: probed
[    1.284636] libphy: unimac MII bus: probed
[    1.292988] unimac-mdio f0b403c0.mdio: Broadcom UniMAC MDIO bus at 0xfcb403c0
[    1.300973] brcm-systemport f04a0000.ethernet: Broadcom SYSTEMPORTv 1.00 at 0xfc4a0000 (irqs: 54, 55, TXQs: 32, RXQs: 1)
[    1.314544] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.318044] ata1: SATA link down (SStatus 0 SControl 300)
[    1.325797] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.332299] xhci-brcm: xHCI BRCM driver
[    1.336229] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[    1.342073] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
[    1.350199] xhci-brcm f0471000.xhci_v2: irq 115, io mem 0xf0471000
[    1.356915] hub 1-0:1.0: USB hub found
[    1.360696] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.367956] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[    1.373769] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
[    1.382113] hub 2-0:1.0: USB hub found
[    1.385893] hub 2-0:1.0: 2 ports detected
[    1.390314] ehci-brcm: EHCI BRCM driver
[    1.394231] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
[    1.400060] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
[    1.418032] ehci-brcm f0470300.ehci_v2: irq 111, io mem 0xf0470300
[    1.430029] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.436722] hub 3-0:1.0: USB hub found
[    1.439036] ata2: SATA link down (SStatus 0 SControl 300)
[    1.445907] hub 3-0:1.0: 1 port detected
[    1.450054] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
[    1.455888] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
[    1.473846] ehci-brcm f0470500.ehci_v2: irq 112, io mem 0xf0470500
[    1.486029] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.492722] hub 4-0:1.0: USB hub found
[    1.496500] hub 4-0:1.0: 1 port detected
[    1.500650] ehci-brcm f0480300.ehci_v2: EHCI Host Controller
[    1.506487] ehci-brcm f0480300.ehci_v2: new USB bus registered, assigned bus number 5
[    1.524437] ehci-brcm f0480300.ehci_v2: irq 117, io mem 0xf0480300
[    1.536028] ehci-brcm f0480300.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.542703] hub 5-0:1.0: USB hub found
[    1.546482] hub 5-0:1.0: 1 port detected
[    1.550630] ehci-brcm f0480500.ehci_v2: EHCI Host Controller
[    1.556460] ehci-brcm f0480500.ehci_v2: new USB bus registered, assigned bus number 6
[    1.574412] ehci-brcm f0480500.ehci_v2: irq 118, io mem 0xf0480500
[    1.586028] ehci-brcm f0480500.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.592680] hub 6-0:1.0: USB hub found
[    1.596462] hub 6-0:1.0: 1 port detected
[    1.600794] ohci-brcm: OHCI BRCM driver
[    1.604707] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
[    1.610527] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 7
[    1.618407] ohci-brcm f0470400.ohci_v2: irq 113, io mem 0xf0470400
[    1.679489] hub 7-0:1.0: USB hub found
[    1.683268] hub 7-0:1.0: 1 port detected
[    1.687402] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
[    1.693229] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 8
[    1.701119] ohci-brcm f0470600.ohci_v2: irq 114, io mem 0xf0470600
[    1.762508] hub 8-0:1.0: USB hub found
[    1.766286] hub 8-0:1.0: 1 port detected
[    1.770429] ohci-brcm f0480400.ohci_v2: BRCM OHCI controller
[    1.776265] ohci-brcm f0480400.ohci_v2: new USB bus registered, assigned bus number 9
[    1.784148] ohci-brcm f0480400.ohci_v2: irq 119, io mem 0xf0480400
[    1.845492] hub 9-0:1.0: USB hub found
[    1.849271] hub 9-0:1.0: 1 port detected
[    1.853413] ohci-brcm f0480600.ohci_v2: BRCM OHCI controller
[    1.854049] usb 5-1: new high-speed USB device number 2 using ehci-brcm
[    1.865861] ohci-brcm f0480600.ohci_v2: new USB bus registered, assigned bus number 10
[    1.873829] ohci-brcm f0480600.ohci_v2: irq 120, io mem 0xf0480600
[    1.935498] hub 10-0:1.0: USB hub found
[    1.939363] hub 10-0:1.0: 1 port detected
[    1.943711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.950259] ehci-pci: EHCI PCI platform driver
[    1.954810] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.961009] ohci-pci: OHCI PCI platform driver
[    1.965760] usbcore: registered new interface driver usb-storage
[    1.971966] mousedev: PS/2 mouse device common for all mice
[    1.977791] hub 5-1:1.0: USB hub found
[    1.978004] i2c /dev entries driver
[    1.978408] IR NEC protocol handler initialized
[    1.978410] IR RC5(x) protocol handler initialized
[    1.978412] IR RC6 protocol handler initialized
[    1.978414] IR JVC protocol handler initialized
[    1.978416] IR Sony protocol handler initialized
[    1.978417] IR RC5 (streamzap) protocol handler initialized
[    1.978419] IR SANYO protocol handler initialized
[    1.978421] IR MCE Keyboard/mouse protocol handler initialized
[    1.978775] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[    1.978979] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.979260] sdhci: Secure Digital Host Controller Interface driver
[    1.979262] sdhci: Copyright(c) Pierre Ossman
[    1.979264] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.980384] mmc0: no vqmmc regulator found
[    1.980387] mmc0: no vmmc regulator found
[    2.011027] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[    2.071123] hub 5-1:1.0: 4 ports detected
[    2.073437] usbcore: registered new interface driver usbhid
[    2.073438] usbhid: USB HID core driver
[    2.084655] TCP: cubic registered
[    2.088010] NET: Registered protocol family 17
[    2.092597] Distributed Switch Architecture driver version 0.1
[    2.100524] sys0[0]: detected a Broadcom Starfighter 2 switch
[    2.106492] Starfighter 2 top: 4.00, core: 2.00 base: 0xfcb00000, IRQs: 56, 57
[    2.115898] libphy: dsa slave smi: probed
[    2.170669] mmc0: BKOPS_EN bit is not set
[    2.179029] f0b403c0.mdio:05: Broadcom BCM7445 PHY revision: 0x10, patch: 3
[    2.187181] mmc0: new high speed MMC card at address 0001
[    2.192867] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[    2.197502] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
[    2.203521] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
[    2.209532] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
[    2.218468]  mmcblk0: p1 p2 p3 p4
[    2.223529]  mmcblk0boot1: unknown partition table
[    2.229050]  mmcblk0boot0: unknown partition table
[    2.397157] usb 5-1.1: new high-speed USB device number 3 using ehci-brcm
[    2.413178] attached PHY at address 5 [Broadcom BCM7445]
[    2.418984] net eth0: PHY already attached
[    2.423282] Key type dns_resolver registered
[    2.427676] Registering SWP/SWPB emulation handler
[    2.432899] regulator-dummy: disabling
[    2.439887] ALSA device list:
[    2.442875]   No soundcards found.
[    2.447497] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    2.463442] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
[    2.472351] VFS: Mounted root (ext4 filesystem) on device 179:4.
[    2.479128] devtmpfs: mounted
[    2.482301] Freeing unused kernel memory: 252K (c0782000 - c07c1000)
[    2.575168] usb 5-1.2: new full-speed USB device number 4 using ehci-brcm
[    2.839265] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
[    3.072590] random: nonblocking pool is initialized
[    3.581287] usb 5-1.1: USB disconnect, device number 3
[    3.630588] usbcore: registered new interface driver dbus_usbdev
[    3.717885] bcm_event: module license 'Proprietary' taints kernel.
[    3.724088] Disabling lock debugging due to kernel taint
[    3.790176] usb 5-1.1: new high-speed USB device number 5 using ehci-brcm
[    3.885608] Dongle Host Driver, version 1.363.110.16 (r620666)
[    3.885608] Compiled in  on Oct 27 2016 at 18:59:23
[    3.897950] Register interface [wlan3]  MAC: 00:90:4c:11:22:33
[    3.897950]
[    5.706078] libphy: fixed-0:00 - Link is Up - 1000/Full
[   11.731607] DVB: registering new adapter (_vuplus_ultimo4k_)
[   12.105116] bcm7444: hotplug_callback():
[   12.105116] Hotplug - status.connected 1:0:1
[   12.112228] bcm7444: hotplug_callback():
[   12.112228] Hotplug - connecting HDMI to display 0xe
[   12.206025] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[   12.318112] [MPVR]: >> misc_pvr_init
[   12.324201] [VID]: 6bcm7335_video_init
[   12.389443] [AUD]: 6bcm7335_audio_init
[   12.394261] [AUD]: >> bcm_audio_capture_init
[   12.402326] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d5195400 state=d3a34800  config=bf8c3588
[   12.427717] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   12.435726] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4831c00 state=d3a34000  config=bf8c3590
[   12.458049] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   12.467694] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4831400 state=d4829800  config=bf8c3598
[   12.487891] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   12.496848] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4833c00 state=d4829000  config=bf8c35a0
[   12.517222] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   12.526292] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4833400 state=d539e000  config=bf8c35a8
[   12.548013] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   12.556107] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4834c00 state=d3d2c800  config=bf8c35b0
[   12.576565] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   12.584613] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4834400 state=d3d2c000  config=bf8c35b8
[   12.604725] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   12.614827] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4835c00 state=d4060000  config=bf8c35c0
[   12.635200] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[   12.643253] -----------8 slot is empty ----------------
[   12.648527] -----------9 slot is empty ----------------
[   12.653775] -----------10 slot is empty ----------------
[   12.659113] -----------11 slot is empty ----------------
[   12.664441] -----------12 slot is empty ----------------
[   12.669774] -----------13 slot is empty ----------------
[   12.675103] -----------14 slot is empty ----------------
[   12.680431] -----------15 slot is empty ----------------
[   12.685762] -----------16 slot is empty ----------------
[   12.691092] -----------17 slot is empty ----------------
[   12.696426] bcm7444: bcm7335_frontend_init(): vtuner1 : 9
[   12.722075] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
[   12.729978] BKNI_Malloc(linuxkernel) top users:
[   12.729978]     blocks,   bytes, filename:line
[   12.738965]       1030,  228944, BSEAV/lib/utils/balloc.c:31
[   12.783462] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[   12.797581] [LCD]: registered
[   13.137884] GPIO Init...
[   13.150289] [CI]: registered ci0
[   13.153885] [CI]: registered ci1
[   13.165502] [CI]: CI interface initialised
[   13.165502]
[   13.179291] [DFP]: registered dbox fp
[   13.186681] [SC]: registered sci0
[   13.195539] [SC]: registered sci1
[   13.359094] system_time_set wakeup mode get
[   13.423035] system_time_set wakeup mode get 0xc4
[   13.455303] BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080
[   13.464199] BKNI_Malloc(linuxkernel) top users:
[   13.464199]     blocks,   bytes, filename:line
[   13.473187]       2425,  530420, BSEAV/lib/utils/balloc.c:31
[   13.605139] FPGA Version 0x11
[   13.733298] wakeup_drv: Initializing wakeup driver
[   13.738457] wakeup_drv: Initialization complete
[   15.466104] libphy: f0b403c0.mdio:05 - Link is Down
[   16.484105] libphy: f0b403c0.mdio:05 - Link is Up - 100/Full
[   17.186464] NET: Registered protocol family 10
[   17.333176] Bluetooth: Core ver 2.18
[   17.337081] NET: Registered protocol family 31
[   17.341550] Bluetooth: HCI device and connection manager initialized
[   17.347936] Bluetooth: HCI socket layer initialized
[   17.352834] Bluetooth: L2CAP socket layer initialized
[   17.357930] Bluetooth: SCO socket layer initialized
[   18.105396] [VID]: VIDEO_SET_STREAMTYPE 1
[   18.109545] [VID]: VIDEO_SELECT_SOURCE 1  0
[   18.113905] [VID]: VIDEO_PLAY 1  5 0
[   18.122941] [VID]: VIDEO_CONTINUE 1  1
[   18.126801] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
[   18.288682] [VID]: VIDEO_STOP 0  1
[   18.293136] [VID]: VIDEO_SELECT_SOURCE 0  0
[   21.096350] [AUD]: AUDIO_SET_MUTE 0
[   21.100375] [AUD]: AUDIO_SET_MIXER -753869176
[   21.104868] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[   21.109966] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[   21.116808] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[   24.634841] [AUD]: AUDIO_SET_MIXER -753869176
[   24.639326] [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32
[   24.644580] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[   24.651562] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355
[   36.295402] [AUD]: AUDIO_SELECT_SOURCE 0
[   36.300686] [AUD]: AUDIO_SET_BYPASS_MODE 8
[   36.305040] [AUD]: AAC downmix 0  state : 0
[   36.309449] [AUD]: AUDIO_PAUSE 8
[   36.313157] [AUD]: AUDIO_PLAY 8 decoder start : 0
[   36.319382] [VID]: VIDEO_SELECT_SOURCE 0  0
[   36.323831] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
[   36.330877] [VID]: VIDEO_GET_SIZE aspect: 1 6
[   36.335576] [VID]: VIDEO_SET_STREAMTYPE 1
[   36.339886] [VID]: VIDEO_FREEZE -1094804420  0
[   36.344503] [VID]: VIDEO_PLAY -1094804420  5 2
[   36.354418] [VID]: VIDEO_SLOWMOTION 0    1
[   36.358568] [VID]: VIDEO_FAST_FORWARD 0    1 0
[   36.363047] [VID]: VIDEO_CONTINUE 0  1
[   36.366941] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd3d76280
[   36.371924] [AUD]: Mute : 0
[   36.374867] [AUD]: AUDIO_CHANNEL_SELECT 0
[DMX]: paserband_remove_pid pid 0x1000 not found
[   42.812466]
[DMX]: paserband_remove_pid pid 0x0 not found
[   42.820433]
[DMX]: paserband_remove_pid pid 0x12 not found
[   42.827928]
[DMX]: paserband_remove_pid pid 0x12 not found
[   42.835338]
[DMX]: paserband_remove_pid pid 0x12 not found
[   42.842725]
[   42.850154] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   42.858262] pgd = d30acf00
[   42.860979] [00000000] *pgd=130aa003, *pmd=91471003
[   42.865899] Internal error: Oops: 207 [#1] SMP ARM
[   42.870695] Modules linked in: bluetooth 6lowpan_iphc ipv6 wakeup_drv(O) brcmfb(O) dvb_bcm7444(PO) dvb_base(PO) bcm_event(PO) procmk(O) dhd(O)
[   42.883629] CPU: 2 PID: 1517 Comm: enigma2 Tainted: P           O 3.14.28-1.12 #1
[   42.891120] task: d3f31240 ti: d3256000 task.ti: d3256000
[   42.896556] PC is at bcm_is_legacy_tuner+0x1c/0x38 [dvb_bcm7444]
[   42.902584] LR is at bcm7335_get_parserband+0x34/0x5c [dvb_bcm7444]
[   42.908859] pc : [<bf7b03e8>]    lr : [<bf7a296c>]    psr: a00e0013
[   42.908859] sp : d3257d50  ip : 00000021  fp : b1200720
[   42.920347] r10: c041c5f4  r9 : bf8c6424  r8 : bf8c3628
[   42.925578] r7 : 00000016  r6 : bf8bf998  r5 : 00000010  r4 : 00000011
[   42.932111] r3 : 00000000  r2 : 00000009  r1 : d3257d54  r0 : bf92b298
[   42.938646] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   42.945787] Control: 30c5387d  Table: 130acf00  DAC: 55555555
[   42.951539] Process enigma2 (pid: 1517, stack limit = 0xd3256238)
[   42.957638] Stack: (0xd3257d50 to 0xd3258000)
[   42.961998] 7d40:                                     d314b240 bf370b3c d5b50000 bf33201c
[   42.970184] 7d60: bf59bec0 bf4c9390 d3d76380 bf7a296c 00000011 e963213c e963113c bf7a5008
[   42.978370] 7d80: e963213c bf0c6e9c d406e140 bf7ef67c 00000000 bf7a2dc0 00200200 e96d61d8
[   42.986556] 7da0: d59892c0 00000019 00000000 d3257d04 c00e1b20 00100100 00200200 e96d6400
[   42.994741] 7dc0: d3a3e300 00000019 00000000 d3257d04 c00e1b20 00100100 00200200 e96d64b8
[   43.002927] 7de0: d38ef140 bf8bf998 bf8bfb70 00000000 e963213c e963113c 00000000 c041c5f4
[   43.011113] 7e00: b1200720 c041e860 e96d6000 e96d60b8 00000000 bf8bcd24 00000000 bf8bccdc
[   43.019298] 7e20: c041c5f4 c041bc9c e96d60b8 e96d60b8 00000000 c041bd54 e96d60b8 00006f2a
[   43.027484] 7e40: 00000000 bf8bcd24 00000000 c041c674 a21754f1 d3256000 d3257fb0 d510a200
[   43.035670] 7e60: 80000207 00006f2a d3d5c080 00000000 00000000 00000000 00000000 c041c5f4
[   43.043856] 7e80: b1200720 c041ab34 00400039 00000000 00000000 00000000 00400000 00000000
[   43.052042] 7ea0: 00000000 00000000 00000000 00000000 00000000 00000000 003a0000 00000000
[   43.060228] 7ec0: 00000005 d3257f74 00000001 ffffff9c d510b000 c000f0e4 d3256000 00000000
[   43.068414] 7ee0: aeefef3c c00dee20 00000041 c07cec48 00000207 c001ba84 000ac690 d3257fb0
[   43.076600] 7f00: 003a6040 b1200508 b1200510 00000000 d3fc8050 d3d5c080 00000022 00000000
[   43.084787] 7f20: d3256000 00000000 b1200720 c00e10d0 aeefeb00 d399f900 00000000 d5425c00
[   43.092972] 7f40: 00000008 00000001 d399f908 00000000 aeefec1c c00d0e0c 00000000 00000000
[   43.101158] 7f60: 0000002d d399f901 d399f900 d3d5c081 00000022 d3d5c080 00006f2a 00000000
[   43.109343] 7f80: d3256000 00000000 b1200720 c00e128c 011af378 00000000 011ac9d0 00000036
[   43.117529] 7fa0: c000f0e4 c000ef60 011af378 00000000 00000022 00006f2a 00000000 00000001
[   43.125714] 7fc0: 011af378 00000000 011ac9d0 00000036 003a5b18 003a6040 b1200718 b1200720
[   43.133900] 7fe0: 00216ec0 aeefeaac 000989cc b63721dc 200e0010 00000022 ed769ea3 17e6f053
[   43.142134] [<bf7b03e8>] (bcm_is_legacy_tuner [dvb_bcm7444]) from [<bf7a296c>] (bcm7335_get_parserband+0x34/0x5c [dvb_bcm7444])
[   43.153655] [<bf7a296c>] (bcm7335_get_parserband [dvb_bcm7444]) from [<bf7a5008>] (bcm7335_demux_start_feed_trans+0x194/0xec4 [dvb_bcm7444])
[   43.166297] [<bf7a5008>] (bcm7335_demux_start_feed_trans [dvb_bcm7444]) from [<c041e860>] (dmx_section_feed_start_filtering+0xb0/0x150)
[   43.178488] [<c041e860>] (dmx_section_feed_start_filtering) from [<c041bc9c>] (dvb_dmxdev_feed_restart+0x114/0x118)
[   43.188937] [<c041bc9c>] (dvb_dmxdev_feed_restart) from [<c041bd54>] (dvb_dmxdev_filter_stop+0xb4/0xd0)
[   43.198342] [<c041bd54>] (dvb_dmxdev_filter_stop) from [<c041c674>] (dvb_demux_do_ioctl+0x80/0x5b8)
[   43.207400] [<c041c674>] (dvb_demux_do_ioctl) from [<c041ab34>] (dvb_usercopy+0xd0/0x158)
[   43.215589] [<c041ab34>] (dvb_usercopy) from [<c00e10d0>] (do_vfs_ioctl+0x428/0x5b0)
[   43.223344] [<c00e10d0>] (do_vfs_ioctl) from [<c00e128c>] (SyS_ioctl+0x34/0x5c)
[   43.230665] [<c00e128c>] (SyS_ioctl) from [<c000ef60>] (ret_fast_syscall+0x0/0x30)
[   43.238245] Code: e52de004 e24dd01c e5103fb4 e28d1004 (e5933000)
[   43.244387] ---[ end trace d6b1065f1e839b21 ]---

[marcy919]

I always open open on all of my receivers zero vu
only if duo2 etc. etc. iptv itself there is no problem but image on the last v do not have to try vat openatv black hole same iptv there are no problems i want to use openpli why and the best

[Erik Slagter]

There it is, caught in the act. This is what we call a driver crash. Only reboot helps.

[   42.860979] [00000000] *pgd=130aa003, *pmd=91471003
[   42.865899] Internal error: Oops: 207 [#1] SMP ARM
[   42.870695] Modules linked in: bluetooth 6lowpan_iphc ipv6 wakeup_drv(O) brcmfb(O) dvb_bcm7444(PO) dvb_base(PO) bcm_event(PO) procmk(O) dhd(O)
[   42.883629] CPU: 2 PID: 1517 Comm: enigma2 Tainted: P           O 3.14.28-1.12 #1
[   42.891120] task: d3f31240 ti: d3256000 task.ti: d3256000
[   42.896556] PC is at bcm_is_legacy_tuner+0x1c/0x38 [dvb_bcm7444]
[   42.902584] LR is at bcm7335_get_parserband+0x34/0x5c [dvb_bcm7444]
[   42.908859] pc : [<bf7b03e8>]    lr : [<bf7a296c>]    psr: a00e0013
[   42.908859] sp : d3257d50  ip : 00000021  fp : b1200720
[   42.920347] r10: c041c5f4  r9 : bf8c6424  r8 : bf8c3628
[   42.925578] r7 : 00000016  r6 : bf8bf998  r5 : 00000010  r4 : 00000011
[   42.932111] r3 : 00000000  r2 : 00000009  r1 : d3257d54  r0 : bf92b298
[   42.938646] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   42.945787] Control: 30c5387d  Table: 130acf00  DAC: 55555555

Edited by Erik Slagter, 6 November 2017 - 19:42.

[marcy919]

I restarted several times but the channel change always happens that it locks with a wheel

[Erik Slagter]

Do you have "IPTV" services in that bouquet? That seems to be a trigger. I've never seen it myself.

[marcy919]

sorry my ignorance but if i'm drivers because if i put openatv or black hole the error is not there

[marcy919]

the same iptv use on vu duo 2 and other decoder with openpli 6 and same dekoder last 4 i tried iptv with openatv and black hole without problems

[marcy919]

I also have mut @ nt HD 51 4K same iptv with openpli 6.0 without any problems

[Erik Slagter]

So what is your suggestion we do, about a driver crash?

[marcy919]

I do not know just know I just use open-ups on all my boxes and always with the same iptv but the problem is only on the last 4k and only with openpli because i tried writing as other 2 pictures is the problem there is' i would like to always open open on vu + ultimio 4k I hope you find the problem.

[marcy919]

sorry but possible here no one uses last 4k with iptv and has the problem that it hangs? thanks I hope that from the log you can fix the problem. thank you

[Erik Slagter]

There it is, caught in the act. This is what we call a driver crash. Only reboot helps.

Maybe this part wasn't clear. I've explained this quite a few times the last years, but well, let's do it again. Drivers are used as-is from the manufacturer. The source is not available so we cannot build them, nor debug them. Driver crash must be fixed by the manufacturer.

[marcy919]

OK thanks

[marcy919]

goodbye sorry if i insist but i loaded on the latest last 4 k picture
vuplus-image-vuultimo4k-20171108011559_usb.zip The problem is not on the channel change if it was a driver problem should it also do with the original image?
then also with last openatv works because the problem is only with openpli?

[WanWizard]

That zipfile is not an OpenPLi image?