Formuler F1 , We want updates for DRIVER to run powervu Without a Stream file
Edited by zikofcb10, 13 November 2017 - 18:16.
27 replies to this topic
Re: driver powervu openpli #2
-
- Senior Member
- 4,774 posts
+69
Good
Posted 13 November 2017 - 18:32
Contact the maker of this product.
Groetjes Cobus R
VU+ UNO 4K SE FBC DVB-C (8x)
MUTANT HD66SE FBC DVB-C (3x)
MAXYTEC MULTIBOX COMBO
MUTANT HD60 DVB-S
Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner
Re: driver powervu openpli #3
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 13 November 2017 - 19:52
Formuler F1 , We want updates for DRIVER to run powervu Without a Stream file
We would also want that. But the manufacturer apparently doesn't care to supply it to us.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: driver powervu openpli #4
-
- Member
- 9 posts
0
Neutral
Re: driver powervu openpli #5
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 13 November 2017 - 20:19
Could be because they have drivers that are not supplied by the manufacturer (and we don't know who did make them).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: driver powervu openpli #6
-
- Member
- 9 posts
0
Neutral
Posted 14 November 2017 - 19:52
we want meethod , we do not want leave openpli
Re: driver powervu openpli #7
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 16 November 2017 - 17:52
You choose...
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: driver powervu openpli #8
-
- Member
- 9 posts
0
Neutral
Posted 24 November 2017 - 21:04
formuler f1 openpli 6.1 powervu Not running !!!!!!!!!!!!!!! 
Edited by zikofcb10, 24 November 2017 - 21:07.
Re: driver powervu openpli #9
-
- Senior Member
- 2,338 posts
+33
Good
Posted 25 November 2017 - 02:11
formuler f1 openpli 6.1 powervu Not running !!!!!!!!!!!!!!!
Do you even read ? You already got your answer.
Could be because they have drivers that are not supplied by the manufacturer (and we don't know who did make them).
Re: driver powervu openpli #10
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 25 November 2017 - 10:18
we want meethod , we do not want leave openpli
Wee want you to READ!
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: driver powervu openpli #11
-
- Member
- 9 posts
0
Neutral
Posted 25 November 2017 - 14:04
All the teams added the drivers, Openpli non 00
Re: driver powervu openpli #12
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 25 November 2017 - 14:17
All the teams added the drivers, Openpli non 00
Do you know what is in them? Do you know they don't contain back doors, or send your passwords elsewhere? Will you take full responsibility for it when that happens?
Those drivers are NOT made by the manufacturer (Formuler in this case), we don't use them because our BSP is created and maintained by the manufacturer and therefore only contain official drivers. Obviously, the manufacturer can and will not add something they haven't made themselfs!
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: driver powervu openpli #13
-
- PLi® Core member
- 57,062 posts
+698
Excellent
Posted 25 November 2017 - 14:23
The "all" teams are using drivers from non genuine source..(read drivers NOT made by the manufacturers).Nobody knows which 'bonusses' might be in there... Do you want to take the risk???
Edited by littlesat, 25 November 2017 - 14:24.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: driver powervu openpli #14
-
- Member
- 9 posts
0
Neutral
Posted 25 November 2017 - 14:33
Being with all teams is normal
Re: driver powervu openpli #15
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 25 November 2017 - 14:35
If the risk is worth it to you, I suggest you switch to another image. If not, wait until the manufacturer comes with a solution we can implement.
Either way it's not that important for us, watching Powervu channels is illegal anyway.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: driver powervu openpli #16
-
- Member
- 9 posts
0
Neutral
Posted 25 November 2017 - 14:38
ok We will wait
Edited by zikofcb10, 25 November 2017 - 14:39.
Re: driver powervu openpli #17
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 26 November 2017 - 09:30
Or use the "all" images with drivers you like so much.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: driver powervu openpli #18
-
- Member
- 13 posts
0
Neutral
Posted 28 November 2017 - 17:41
at least his box is supported, I have a Gigablue Quad...
Re: driver powervu openpli #19
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 28 November 2017 - 17:44
There has been contact with Gigablue, but there are serious issues with the drivers that aren't being fixed because OpenATV has worked around them, and they don't seem to want to break that.
I haven't seen any progress for a while, so it looks like Gigablue isn't (that) interested anymore...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: driver powervu openpli #20
-
- Member
- 13 posts
0
Neutral
Posted 12 December 2017 - 20:11
There has been contact with Gigablue, but there are serious issues with the drivers that aren't being fixed because OpenATV has worked around them, and they don't seem to want to break that.
I haven't seen any progress for a while, so it looks like Gigablue isn't (that) interested anymore...
Yes your are right, I just made another mistake I got an u5pvr andoir set top box...
11 user(s) are reading this topic
0 members, 11 guests, 0 anonymous users
