Jump to content


Photo

Glamour Aura FHD skin - first public release canditate (RC3)

glamourskins FHD skin Glamour Aura FHD

  • Please log in to reply
266 replies to this topic

Re: Glamour Aura FHD skin - first public release canditate (RC3) #21 Rob van der Does

  • Senior Member
  • 7,766 posts

+184
Excellent

Posted 21 November 2017 - 12:34

Yes, you can; that's why they have been published on GiThub: https://github.com/M...thon/Components



Re: Glamour Aura FHD skin - first public release canditate (RC3) #22 audi06_19

  • Senior Member
  • 26 posts

+8
Neutral

Posted 21 November 2017 - 13:28

the most beautiful skins that have been made in recent years.
It gets super if added to distro.


Re: Glamour Aura FHD skin - first public release canditate (RC3) #23 adelw810

  • Member
  • 6 posts

+2
Neutral

Posted 21 November 2017 - 16:43

amazing skin 

Pli6 ok

Pli4 crash 



Re: Glamour Aura FHD skin - first public release canditate (RC3) #24 littlesat

  • PLi® Core member
  • 57,177 posts

+698
Excellent

Posted 21 November 2017 - 17:08

Yes, you can; that's why they have been published on GiThub

I see some renderers seems to be ported from coders that usually have licences that do not allow us to use it.... :(

And for some renderers and converters openpli has 'alernatives' within the image...


Edited by littlesat, 21 November 2017 - 17:10.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Glamour Aura FHD skin - first public release canditate (RC3) #25 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 21 November 2017 - 18:09

Thank you for the reports and your nice words!

Littlesat can you direct me to where the pythons used coding that was pre-licensed? Because I was very careful with that, it took a long research to add coding that was not licensed not to be used freely.



Re: Glamour Aura FHD skin - first public release canditate (RC3) #26 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 21 November 2017 - 18:13

pli4 gives a cannot concenate error, which puzzles me as I pre-converted everything to string, so I don't know what causes the incompatibility. Maybe something has changed significantly between pli 4 and pli 6 in python level.



Re: Glamour Aura FHD skin - first public release canditate (RC3) #27 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 21 November 2017 - 19:18

I was accidentally on a DVB-T channel as I tested it on OpenPLi4, all ok, as I switched to a DVB-S channel, green screen 



Re: Glamour Aura FHD skin - first public release canditate (RC3) #28 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 21 November 2017 - 19:39

I get this error switching to a DVB-S channel

 

<   478.309> playing 1:0:1:6DCA:44D:1:C00000:0:0:0:
<   478.558> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
<   478.693> Traceback (most recent call last):
<   478.693>   File "/usr/lib/enigma2/python/Navigation.py", line 59, in dispatchEvent
<   478.782>   File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 80, in event
<   478.785>   File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 104, in serviceStarted
<   478.788>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 317, in serviceStarted
<   478.789>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 330, in doShow
<   478.790>   File "/usr/lib/enigma2/python/Screens/Screen.py", line 158, in show
<   478.799>   File "/usr/lib/enigma2/python/Components/Renderer/Renderer.py", line 10, in onShow
<   478.802>   File "/usr/lib/enigma2/python/Components/Element.py", line 99, in setSuspend
<   478.804>   File "/usr/lib/enigma2/python/Components/Element.py", line 104, in checkSuspend
<   478.805>   File "/usr/lib/enigma2/python/Components/Element.py", line 94, in setSuspend
<   478.806>   File "/usr/lib/enigma2/python/Components/Converter/Poll.py", line 32, in doSuspend
<   478.809>   File "/usr/lib/enigma2/python/Components/Converter/Poll.py", line 25, in poll
<   478.809>   File "/usr/lib/enigma2/python/Components/Converter/GlamourBase.py", line 912, in changed
<   478.811>   File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
<   478.812>   File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
<   478.815>   File "/usr/lib/enigma2/python/Components/Renderer/Label.py", line 21, in changed
<   478.817>   File "/usr/lib/enigma2/python/Components/Element.py", line 15, in wrapper
<   478.817>   File "/usr/lib/enigma2/python/Components/Converter/GlamourBase.py", line 770, in getText
<   478.819> TypeError: cannot concatenate 'str' and 'NoneType' objects
 



Re: Glamour Aura FHD skin - first public release canditate (RC3) #29 littlesat

  • PLi® Core member
  • 57,177 posts

+698
Excellent

Posted 21 November 2017 - 21:14

I see e.g Some derived work from dr best... and e.g a picon tenderer while openpli has it already. But it does not really Harm ;)

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Glamour Aura FHD skin - first public release canditate (RC3) #30 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 21 November 2017 - 21:39

To be fair, it took me a while to select code which was allowed to be modded. For instance, Dr Best had converters where he noted that they shouldn't be used in other machines than Dreamboxes (well, there have been discussion about that, since it's not very clear). One of these was the MSNweather.py. I tried to avoid these, so I was fortunate enough to find an alternative by Sirius which allowed modding. Lots of other parts contain code which had absolutely no license notes. And of course there's lots of code I added myself from scratch. I have to note again that I'm no way a coder, but all this journey made me interested in python, which I began learning, so far I think I did alright! lol Of course we are people, we make mistakes, I'm glad we're here to talk about these so we can fix them.

If anyone spots any code that should be credited, please let me know and I'll add the credits asap.

 

@mrvica

This is the error that happens only on older OpenPLI 4.0 images, on SDG5.0 and OpenPLI 6.0 I see no errors. The line that errs is this:

                if "DVB-S" in self.tunertype(tp):
                    return self.system(tpinfo) + " " + self.modulation(tpinfo) + " " + self.frequency(tp) + " " + self.polarization(tpinfo) + " " + self.symbolrate(tp) + " " + self.fecinfo(tpinfo) + self.multistream(tpinfo)

Which is the line which combines all the elements I define earlier for the frequency info.

For instance:

    def constellation(self, tpinfo):
        return str(tpinfo.get("constellation"))

    def tunersystem(self, tpinfo):
        return str(tpinfo.get("system")) or ""

    def tunertype(self, tp):
        return str(tp.get("tuner_type"))

etc...

 

It's strange though, because each of the elements I define earlier have been converted to strings before the concatenation. So if any of these is a NoneType for some reason it should not give error. And it seems NoneTypes are only produced in python level of PLI4, since in PLI6 the error is not returned. So if anyone can see what element causes that error, let me know so I can fix. Otherwise it's only a PLI4 issue.


Edited by MCelliotG, 21 November 2017 - 21:41.


Re: Glamour Aura FHD skin - first public release canditate (RC3) #31 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 22 November 2017 - 01:00

OK I found the problem with crash on OpenPLI 4.0. The issue is not the concatenation, it's that the multistream parameters are missing from the image, so when the converter tries to search these, it finds a NoneType (not getting a string) so it fails. I'm testing an alternative option which works fine on 4.0 and now test it on MIS on 6.0 to see if it breaks the MIS parameters.

Edit: works great, pushing the change to github

                if "DVB-S" in self.tunertype(tp):
                    if "is_id" in tpinfo or "pls_code" in tpinfo or "pls_mode" in tpinfo:
                        return self.system(tpinfo) + " " + self.modulation(tpinfo) + " " + self.frequency(tp) + " " + self.polarization(tpinfo) + " " + self.symbolrate(tp) + " " + self.fecinfo(tpinfo) + self.multistream(tpinfo)
                    else:
                        return self.system(tpinfo) + " " + self.modulation(tpinfo) + " " + self.frequency(tp) + " " + self.polarization(tpinfo) + " " + self.symbolrate(tp) + " " + self.fecinfo(tpinfo)


Re: Glamour Aura FHD skin - first public release canditate (RC3) #32 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 22 November 2017 - 01:26

And here's the IPK of the RC.4 version with the change, please try it on OpenPLI 4.0 images, thanks in advance!

https://mega.nz/#!Gd...sbJzjUN1xqwTDOk



Re: Glamour Aura FHD skin - first public release canditate (RC3) #33 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 22 November 2017 - 08:40

I can confirm this, short test on OpenPLi4 ok, no green screen on DVB-S channels, thanks



Re: Glamour Aura FHD skin - first public release canditate (RC3) #34 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 22 November 2017 - 18:36

Since nobody created a recipes for WeatherMSN and GFHD here ones.

Recipe for GAFHD.
 
DESCRIPTION = "Glamour Aura FHD skin by MCelliot_g for OpenPLI and OpenPLI based images."
MAINTAINER = "MCelliot_g"
LICENSE = "GPLv3"
LIC_FILES_CHKSUM = "file://LICENSE;md5=84dcc94da3adb52b53ae4fa38fe49e5d"

inherit gitpkgv allarch

PV = "1.0+git${SRCPV}"
PKGV = "1.0+git${GITPKGV}"
PR = "r0"

RRECOMMENDS_${PN} = "enigma2-plugin-extensions-weathermsn"

SRC_URI = "git://github.com/MCelliotG/GlamourAuraFHD-skin.git;protocol=git"
SRCREV = "${AUTOREV}"

FILES_${PN} = "/usr/share/enigma2/ /usr/lib/enigma2/"

S = "${WORKDIR}/git"

do_compile() {
}

do_install() {
	install -d ${D}/usr/share
	cp -r --preserve=mode,links ${S}/usr/share/* ${D}/usr/share/
	chmod -R a+rX ${D}/usr/share/enigma2/

        install -d ${D}/usr/lib
        cp -r --preserve=mode,links ${S}/usr/lib/* ${D}/usr/lib/
        chmod -R a+rX ${D}/usr/lib/enigma2/
}
Recipe for Weather MSN.
 
DESCRIPTION = "Weather forecast for 5 days"
SUMMARY = "Weather MSN"
MAINTAINER = "Sirius"
LICENSE = "GPLv3+"
HOMEPAGE = "www.gisclub.tv"
LIC_FILES_CHKSUM = "file://python/Plugins/Extensions/WeatherMSN/plugin.py;beginline=3;endline=19;md5=10bdcaaaec8041e55835067db0506e8d"

inherit gitpkgv allarch

PV = "0.7+git${SRCPV}"
PKGV = "0.7+git${GITPKGV}"
PR = "r1"

SRC_URI = "git://github.com/Sirius0103/enigma2-plugins.git;protocol=https"
SRCREV = "ab75d3dd2ac6c26d91b52b237d3b5b55a360d93b"

FILES_${PN} = "/usr/lib/enigma2/"

S = "${WORKDIR}/git"

do_compile() {
}

do_install() {
	install -d ${D}/usr/lib/enigma2/python/Plugins/Extensions
	cp -r --preserve=mode,links ${S}/python/Plugins/Extensions/WeatherMSN ${D}/usr/lib/enigma2/python/Plugins/Extensions/
	chmod -R a+rX ${D}/usr/lib/enigma2/
}

Attached Files


Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Glamour Aura FHD skin - first public release canditate (RC3) #35 Loui (PD1LOI)

  • Senior Member
  • 4,609 posts

+146
Excellent

Posted 23 November 2017 - 09:36

Since nobody created a recipes for WeatherMSN and GFHD here ones.

Recipe for GAFHD.
 

DESCRIPTION = "Glamour Aura FHD skin by MCelliot_g for OpenPLI and OpenPLI based images."
MAINTAINER = "MCelliot_g"
LICENSE = "GPLv3"
LIC_FILES_CHKSUM = "file://LICENSE;md5=84dcc94da3adb52b53ae4fa38fe49e5d"

inherit gitpkgv allarch

PV = "1.0+git${SRCPV}"
PKGV = "1.0+git${GITPKGV}"
PR = "r0"

RRECOMMENDS_${PN} = "enigma2-plugin-extensions-weathermsn"

SRC_URI = "git://github.com/MCelliotG/GlamourAuraFHD-skin.git;protocol=git"
SRCREV = "${AUTOREV}"

FILES_${PN} = "/usr/share/enigma2/ /usr/lib/enigma2/"

S = "${WORKDIR}/git"

do_compile() {
}

do_install() {
	install -d ${D}/usr/share
	cp -r --preserve=mode,links ${S}/usr/share/* ${D}/usr/share/
	chmod -R a+rX ${D}/usr/share/enigma2/

        install -d ${D}/usr/lib
        cp -r --preserve=mode,links ${S}/usr/lib/* ${D}/usr/lib/
        chmod -R a+rX ${D}/usr/lib/enigma2/
}
Recipe for Weather MSN.
 
DESCRIPTION = "Weather forecast for 5 days"
SUMMARY = "Weather MSN"
MAINTAINER = "Sirius"
LICENSE = "GPLv3+"
HOMEPAGE = "www.gisclub.tv"
LIC_FILES_CHKSUM = "file://python/Plugins/Extensions/WeatherMSN/plugin.py;beginline=3;endline=19;md5=10bdcaaaec8041e55835067db0506e8d"

inherit gitpkgv allarch

PV = "0.7+git${SRCPV}"
PKGV = "0.7+git${GITPKGV}"
PR = "r1"

SRC_URI = "git://github.com/Sirius0103/enigma2-plugins.git;protocol=https"
SRCREV = "ab75d3dd2ac6c26d91b52b237d3b5b55a360d93b"

FILES_${PN} = "/usr/lib/enigma2/"

S = "${WORKDIR}/git"

do_compile() {
}

do_install() {
	install -d ${D}/usr/lib/enigma2/python/Plugins/Extensions
	cp -r --preserve=mode,links ${S}/python/Plugins/Extensions/WeatherMSN ${D}/usr/lib/enigma2/python/Plugins/Extensions/
	chmod -R a+rX ${D}/usr/lib/enigma2/
}

Where should I post or replace this?



Re: Glamour Aura FHD skin - first public release canditate (RC3) #36 audi06_19

  • Senior Member
  • 26 posts

+8
Neutral

Posted 23 November 2017 - 09:45

Where should I post or replace this?

 

 

 

 

send files here with this state

 

/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugin-extensions-weathermsn.bb

/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-skins/enigma2-plugin-skins-glamouraurafhd.bb

 

 

add here to add to circle

 

/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb

enigma2-plugin-extensions-weathermsn \
enigma2-plugin-skins-glamouraurafhd \

Edited by audi06_19, 23 November 2017 - 09:46.


Re: Glamour Aura FHD skin - first public release canditate (RC3) #37 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 23 November 2017 - 22:37

I made crypto icons to be used in another skins, die Glamour ones have different design, to be used with GlamourAccess converter, I didn´t make them one by one, just made them in a go using ImageMagick converter tool (great tool), I was just fiddling with some command line options

Attached Files



Re: Glamour Aura FHD skin - first public release canditate (RC3) #38 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 23 November 2017 - 23:34

this ones to be used in more blueish skins

Attached Files



Re: Glamour Aura FHD skin - first public release canditate (RC3) #39 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 24 November 2017 - 10:41

I am exposing the secret, a batch file (in the attachment) to make them all 66 in few seconds, it is for Win (make_icons.bat), just rename it to "make_icons" to use it on Linux, You´ll need ImageMagick, for Win get portable Version, e.g. to make Viaccess icons

convert -background #5DFC0A -stroke black -strokewidth 1 -bordercolor blue -border 2 -depth 8 -size 28x20 -gravity center -kerning 3 label:VI via_ecm.png
convert -background #ffcc00 -stroke black -strokewidth 1 -bordercolor blue -border 2 -depth 8 -size 28x20 -gravity center -kerning 3 label:VI via_emm.png
convert -background #3F4C9C -stroke black -strokewidth 1 -bordercolor blue -border 2 -depth 8 -size 28x20 -gravity center -kerning 3 label:VI via_no.png

you can make them in any color and size, If someone knows how to make rounded corners, just let us know

Attached Files



Re: Glamour Aura FHD skin - first public release canditate (RC3) #40 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 24 November 2017 - 11:52

That's nice but can we keep the thread for this skin as it is?  I made these graphics from scratch in photoshop, I'm not really fond of people modifying them, especially since I note this in the skin's license (only for personal use). Everyone can use the converters and renderers but the graphics is another story!




11 user(s) are reading this topic

0 members, 11 guests, 0 anonymous users