132 replies to this topic

[zeros]

Adka, do you also have the Front processor missing error? I think, the wrong Front processor error is the reason, why after reboot is first need to select the Skin reboot, to make the menu visible on the screen. Do you have the same issue? Also the red light behind LCD is wrong behavior. Do you have it also red? It must be blue, when recording, but here it lights all time red.

Attached Files

•  605C9F09-C0E1-4446-A647-849143A50E17.jpeg   66.12KB   5 downloads

[Adga]

Adka, do you also have the Front processor missing error? I think, the wrong Front processor error is the reason, why after reboot is first need to select the Skin reboot, to make the menu visible on the screen. Do you have the same issue? Also the red light behind LCD is wrong behavior. Do you have it also red? It must be blue, when recording, but here it lights all time red.

Yes, the same thing to me

 

P.S. On OpenATV image is fine. There are no such errors

Edited by Adga, 2 December 2017 - 23:58.

[zeros]

With ‘PLi-FullHD skin’ the issue ‘after reboot need enigma2 Skin reboot from menu’ will not come. This is ‘PLi HD’ Skin fault.
Just for info.

[zeros]

/pli-oe-core/meta-dream/recipes-openpli/enigma2/enigma2
tryfix-default-setting-tripletuner.patch removed

Please make update!
Update in this way:
MENU->Setup->Software update->Update and reboot

Please tell, if anything changed better or worse.

[kubi]

I have no better, perhaps worse

[zeros]

And you have Triple tuner? Can you describe the situation. Sad thing is, that yesterday I was able to try dm900, but we act blindly, we have no one at home this dm900 box.

Edited by zeros, 3 December 2017 - 18:11.

[kubi]

Sorry for my bad english. Maybe the problem in DVB-C? I will describe the situation completely. My configuration: A1 - fixed antenna 36E, A2 - motor 15W-60E, plus DVB-C (or DVB-T2). In settings А1 (or А2) you can not for example enable S2 and shut off C/T2. If you include something (or disable), then all enable (or all disable). Plugin "Cable Scan" in "Service searching" missing. In settings plugins "Signal finder" and "Manual Scan" for "Cable" disappeared "Predefined transponder" (for "Satelite" и "Terrestrial" there is). When run in plugin "Manual Scan" "Complete" DVB-C (and T2) error "Nothing to scan! Please setup your tuner settings before you start a service scan.", S2 Ok. After "Restart enigma" do not work channels A1-S2 (A2-S2 and A1-C Ok). After full restart Ok. OpenAtv and OE2.5 no problem.

[kubi]

Sorry for my bad english. Yes, Triple tuner. Maybe the problem in DVB-C? I will describe the situation completely. My configuration: A1 - fixed antenna 36E, A2 - motor 15W-60E, plus DVB-C (or DVB-T2). In settings А1 (or А2) you can not for example enable S2 and shut off C/T2. If you include something (or disable), then all enable (or all disable). Plugin "Cable Scan" in "Service searching" missing. In settings plugins "Signal finder" and "Manual Scan" for "Cable" disappeared "Predefined transponder" (for "Satelite" и "Terrestrial" there is). When run in plugin "Manual Scan" "Complete" DVB-C (and T2) error "Nothing to scan! Please setup your tuner settings before you start a service scan.", S2 Ok. After "Restart enigma" do not work channels A1-S2 (A2-S2 and A1-C Ok). After full restart Ok. OpenAtv and OE2.5 no problem.

P.S. during the initial setup in others imags first configurable C, later S, later T. In OpenPli S-T-C

 0001atv.jpg   133.69KB   4 downloads  0001atv2.jpg   126.94KB   2 downloads  0001atv3.jpg   133.84KB   2 downloads  0001pli.jpg   51.12KB   2 downloads  0001pli2.jpg   49.97KB   2 downloads  0001pli3.jpg   48.8KB   2 downloads

 

[zeros]

kubi, if possible, please describe the differences between the last three tests

1) enigma2 dvb-s2x patch
Try to fix "DVB-S2X". TEST1.

2) /pli-oe-core/meta-dream/recipes-openpli/enigma2/enigma2
Changes in NimManager.py // added patch 'tryfix-default-setting-tripletuner.patch'

3) /pli-oe-core/meta-dream/recipes-openpli/enigma2/enigma2
tryfix-default-setting-tripletuner.patch removed

OK, I understand, it is not easy task. I can understand your description. Try to compare these bad tests 1) 2) 3), maybe we can get some kind of foothold.

[kubi]

I used all three, I saw no difference. Only the last one time the channels disappeared A2-S.

p.s. Triple tuner has two revision. I have 1.

[zeros]

OK, thanks for the report. The thing is in beginning back, All kind of thoughts are welcomed. It is quite a puzzle.

Edited by zeros, 3 December 2017 - 20:55.

[zeros]

Next TEST you make yourself. With current image try such config- only one tuner is connected.
Setup->Service searching->Tuner configuration->
Make configuration in this way, that only one Tuner is connected. This mean all else tuners are ‘Not configured’
You can easily select from menu, that ‘Not configured’, and when you select that, please don’t delete the satellites, what it ask to delete. And report results, if in this case the thing with that one Tuner is better.
Waiting your response.

Edited by zeros, 4 December 2017 - 06:15.

[kubi]

zeros, the same problems

[zeros]

Can you confirm, that with Triple tuner the stuff it works OK? No problem at all?

[zeros]

The question was intended to be on the openatv, I'm sorry, I can't edit my post.

[kubi]

On the openatv no problem

[Adga]

On the openatv no problem

I confirm With OpenATV image It works well

[zeros]

Thanks, I'm looking for a solution from openatv code.
Can you please test this ‘EnigmaLight support arm model’ plugin with that TEST image: https://forums.openp...port-arm-model/
The red LED light, which is located next to the LCD on front panel and is red, I think this plugin could be suitable for config it. You can test and confirm?

[zeros]

About Triple tuner Si2169C (DVB-T2,DVB-C,DVB-S2) I find
https://www.silabs.c...lators_si2169-c
Looking from there. Is this the tuner type, what you have?

Edited by zeros, 4 December 2017 - 21:39.

[kubi]

maybe this

 

Attached Files

•  SILC-S-A0000177624-1.pdf   138.57KB   6 downloads