Posted 19 December 2017 - 19:14
Usually copy/paste works best in these cases.
As to Windows sharing, if you haven't made any custom shares on your box, I have a similar fix for you:
wget https://raw.githubusercontent.com/OpenPLi/openpli-oe-core/rc/meta-openpli/recipes-connectivity/samba/samba/smb.conf -O /etc/samba/smb.confnote, again, O and not zero!
After this fix you need to restart the box.
I will try it when I have time. Work calls, sadly.
Posted 20 December 2017 - 20:53
Hi , the picture works flawlessly on my solo 4K, only a tnt dvbs2 tnt problem
To be sure I reinstalled an old backup version 6.0 and I have a signal between 80 and 90/100, with version 6.1 I am 27/100! with complete freeze
Is it possible to go back with the driver dvb-t because I lose 50/100 of the signal with the current version 6.1 compared to version 6.0 that I backup last month
Posted 20 December 2017 - 21:30
Nothing much changed between 6.0 and 6.1. Is that a USB stick or a built-in tuner?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 20 December 2017 - 21:40
Nothing much changed between 6.0 and 6.1. Is that a USB stick or a built-in tuner?
built-in tuner
Posted 20 December 2017 - 21:46
This what i have now 
with internal dvbt2
1_0_1_1_A_2038_EEEE0000_0_0_0.jpg 90.59KB
6 downloads
Posted 20 December 2017 - 21:56
Just to be sure, this is about DVB-S2 or DVB-T? You mention both in your first post, which confuses me a bit.
I don't think we have VU+ DVB-T tuners in the team we can test.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 20 December 2017 - 22:01
Just to be sure, this is about DVB-S2 or DVB-T? You mention both in your first post, which confuses me a bit.
I don't think we have VU+ DVB-T tuners in the team we can test.
This is about DVB-T , the difference is very important
Now the image is no longer usable for me
I thought that my dvb-t antenna was hs, but trying with an old backup I got a signal of more than 80/100 so my installation is impeccable
Posted 20 December 2017 - 22:07
Then we need confirmation from others that it is indeed a driver issue, so we can provide feedback to VU+.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 20 December 2017 - 22:09
Exactly the same channel with previous version
Système OE: PLi-OE Version du firmware: OpenPLi 6.0-rc (2017-09-02-rc-6.0) Version du noyau / Pilotes: 3.14.28 / 3.14.28-20170821.r0.0
DvbT2-ok.jpg 141.71KB
7 downloads
Posted 21 December 2017 - 17:22
Ok, the problem is solved
In fact the bug comes from the automatic scan which takes the chains but apparently not well
I have now done a manual scan of channels 22,43,46 and 56 and everything is ok now ( dvbt and dvbt2 )
I hope my information can help find the bug
DVBt-ok.jpg 120.17KB
6 downloads
Posted 11 January 2018 - 15:58
I have the same issue with the box not appearing in Windows Explorer. Samba is running, I have the correct conf and the Net View command does show the 3 shares. I have tried on 2 different PC's, one with Win 10 Home and the other with Win 10 Pro. If I put OpenViX on the box, it shows straight away.
I'm using the 6.1 release from the 8th Jan, currently on a ZGemma LC but have also tried on a Vu+ Duo2, albeit with a 6.1RC on that.
I'm wondering if I could use the Samba from ViX on the PLi image - would that work?
Posted 11 January 2018 - 17:23
I'm wondering if I could use the Samba from ViX on the PLi image - would that work?
LOL: I'm using the PLi Samba-config in ViX to get it to work.......
Posted 11 January 2018 - 18:39
With samba, you should be careful, chances are when you restore the backup, you also restore an incorrect version of the config.
This is the default one: https://raw.githubus.../samba/smb.conf
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 January 2018 - 19:12
I have tried with the default conf from the git, also tried uninstalling both samba and samba-base then re-installing but still the same - samba is running, net view from the Windows cmd finds the devices but can't see them in Windows explorer.
Posted 11 January 2018 - 19:15
Are both in the same workgroup?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 January 2018 - 20:03
Both Windows and the default conf file use the workgroup - WORKGROUP
Posted 12 January 2018 - 06:57
I'm wondering if I could use the Samba from ViX on the PLi image - would that work?LOL: I'm using the PLi Samba-config in ViX to get it to work.......
For Windows 10 that is. Using Windows 7 & 8.1 I never had any issue.
0 members, 1 guests, 0 anonymous users
