Jump to content


Photo

Open-pli 6.0 , 6.1 for vu+uno 4k

Started by kemalege2000, 20 Dec 2017 12:30

  • Please log in to reply
20 replies to this topic

#1 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 20 December 2017 - 12:30

Hello ,

Hello,   my device is Vu+ uno 4k  receiver .. I want to use .Open-pli 6.0 , 6.1 images  ..but I'm living some problems..
 I download  OPEN-pli 6.0  for vu+ uno 4k .. And I plug 160 gb hp HDD by using usb ..(External)

Mount manager , Device manager downloaded ,  and prepared as ext4  format ..  Rec and Timeshift are working ..

  When I restart the receiver  and push for rec (red small button) or timeshift ...     'HDD  is lost'  is written on screen.. Again ext4 format , No .. 'Device is mounted'  written..

 Where is the problem?

 

On the other hand  , When I plug HDD , extension openwebif  is lost .. and doesn't work ...

 

 Blackhole 3.0.3  ,3.0.4  , Blackhole 1.0   images  are working stable  ..They have no this problem..

 Thanks..

 


Re: Open-pli 6.0 , 6.1 for vu+uno 4k #2 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 20 December 2017 - 14:32

What did you use the mount manager for? USB devices don't need any help to be mounted?

 

And I don't see what the relation is between a USB device and the webif?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #3 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 20 December 2017 - 17:04

I don't  know .. When I plug HDD to receiver ..Openwebif  extension  gives error ... and  extensions have no openwebif.. Usually  timeshift  doesn't work  .. ıt says stop...


Re: Open-pli 6.0 , 6.1 for vu+uno 4k #4 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 20 December 2017 - 17:06

I'm using openmultiboot 1.38.. Flash >open Atv 6.1 , in usb open-pli 6.1 ,6.0 , openblackhole 1.1 , 4.1  ,..vs


Re: Open-pli 6.0 , 6.1 for vu+uno 4k #5 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 20 December 2017 - 17:19

Ah...

 

OpenPLi doesn't really support multiboot, chances are it is caused because of another image in flash. It is an illusion that images are compatible (enough) to cross-boot. They aren't.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #6 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 20 December 2017 - 21:25

Thank you ..I don't think so ..But  I will try it  in flash ...  OBHole 1.0 and 4.1 work stable for multiboot.. There is no problem..


Re: Open-pli 6.0 , 6.1 for vu+uno 4k #7 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 20 December 2017 - 21:28

That doesn't really say anything.

 

Fact remains we don't support Multiboot. If you have the problem without Multiboot, we might have a look. But then we still need to know exactly what you are doing, because you don't need a mount manager for USB devices.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #8 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 21 December 2017 - 07:52

Hello , If I flash  only  open-pli image on  receiver , works stable ...I have no problem without multiboot.. If I  download open-pli image on usb as multiboot .. Woovvv ..HDD ProbIems appaer ..Openwebif is lost..

Is  there any  open-pli image    that has multiboot   for  main image  on flash?


Re: Open-pli 6.0 , 6.1 for vu+uno 4k #9 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 21 December 2017 - 09:42

You keep repeating yourself.

 

Does it work with OpenPLi in flash and NO multiboot. If yes, it's a multiboot issue.If no, it's an OpenPLi issue.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #10 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 21 December 2017 - 10:37

It works with Open-Pli in flash without openmultiboot.  If I download Openmultiboot 1.42  from extensions  and  starts it .. 'omb diseable '  is written on screen.. I think ,it is multiboot problem ..

 Where can I download openmultiboot extension that works  stable  without problem  with Open-Pli image..


Edited by kemalege2000, 21 December 2017 - 10:38.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #11 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 21 December 2017 - 13:18

I tried openmultiboot 2.5 for all E2 image  in flash. (OPen-Pli 6.1 rc image) Press OK for next image  , OMB disabled  is written on screen.. I want to work OMB in flash..


Edited by kemalege2000, 21 December 2017 - 13:18.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #12 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 21 December 2017 - 20:51

Open-pli never  supports multiboot  for vu+ uno4k ...Thankyou for everything..


Re: Open-pli 6.0 , 6.1 for vu+uno 4k #13 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 22 December 2017 - 09:37

Open-pli never  supports multiboot  for vu+ uno4k


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #14 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 22 December 2017 - 13:20

See post #7. ;)


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #15 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 22 December 2017 - 18:35

Pardon .. Open-pli  Works in flash  but to day ,During the openning  extensions .. This message  appared on screen     'Extensions/openwebif(Errno2 ,No such file or directory' '/media/hdd')

Can you help me?  Openwebif does't work ..What can I do?   I enjoy Open-pli...please..


Edited by kemalege2000, 22 December 2017 - 18:38.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #16 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 22 December 2017 - 21:16

Do not use any multiboot solution. I think this has been said enough times, don't you think?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #17 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 22 December 2017 - 22:11

 

Open-pli never  supports multiboot  for vu+ uno4k

Maybe it helps if we repeat it over an over again.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #18 kemalege2000

  • Member
  • 17 posts

0
Neutral

Posted 23 December 2017 - 14:47

  •  

    Do not use any multiboot solution. I think this has been said enough times, don't you think?

     

     So do I  ..But I want solution ,I want support ..I want Multiboot  in Open-Pli images .. may be Open-Pli group helps if we repeat it again and again ...İs it so difficult ? 
  • I see ..ıf you want to use multiboot..  I'm using   Blackhole , open Atv  vs..  Why ?  They have multiboot.. Ok...  Dear WanWizard Thank you for everything  ..By..

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #19 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 23 December 2017 - 15:44

The problem with multiboot solutions is that you mix different linux environments.

 

It is like wanting to installing and boot Ubuntu on your desktop but run Fedora after you booted. It is never going to work. It is a myth that all images are the same, and are interchangable at any level. They are not.

 

The only way to get multiboot working properly is if it is implemented like on a PC, at the bootloader level, where you select a boot device from a menu, and then boot the ENTIRE image from that device.

 

Beside this, we don't see the point for a multiboot solution, we're only interested in OpenPLi, so don't expect any effort from us.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Open-pli 6.0 , 6.1 for vu+uno 4k #20 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 23 December 2017 - 20:17

So do I  ..But I want solution ,I want support ..I want Multiboot  in Open-Pli images ..

You're always free to make a request ("want"...). That doesn't mean we will always honour it, simple as that. No is also an answer.
 

may be Open-Pli group helps if we repeat it again and again

That will definitely not help your case, it's annoying.
 

...İs it so difficult ? 

Yes it is, it's inherently impossible, see the explanations in this thread.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Back to The Lounge

7 user(s) are reading this topic

0 members, 7 guests, 0 anonymous users

  1. Forums
  2. → General Discussion
  3. → The Lounge