Hi,
I'd like to ask about the possibility of add the system plugin Fast Channel Change (FCC) to OpenPLi image. Is it possible in future?
Regards,
DJWeed
-
This topic is locked
59 replies to this topic
Re: Fast channel change (FCC) plugin in Pli6.1 #2
-
- PLi® Core member
- 57,158 posts
+698
Excellent
Posted 26 December 2017 - 12:21
Why do you think FCC is such nice?
Edited by littlesat, 26 December 2017 - 12:21.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Fast channel change (FCC) plugin in Pli6.1 #3
-
- Senior Member
- 116 posts
0
Neutral
Posted 26 December 2017 - 12:56
Hi,
When using local card this feature makes the channel changing is much faster.
Regards,
DJWeed
Re: Fast channel change (FCC) plugin in Pli6.1 #4
-
- Senior Member
- 37 posts
0
Neutral
Posted 26 December 2017 - 13:28
Great Idea ! only this plugin .. missing 
Re: Fast channel change (FCC) plugin in Pli6.1 #5
-
- PLi® Core member
- 57,158 posts
+698
Excellent
Posted 26 December 2017 - 13:57
It is a not a plug-in. At this moment it is a huge patch offered by vu. And e.g. at the time of ci(+) required and cards that go in punishment mode when you asked too much of it FCC is somehow not really profitable regards the work to implement it properly... and a zaptime from half a sec is also sufficiënt...
Edited by littlesat, 26 December 2017 - 13:58.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Fast channel change (FCC) plugin in Pli6.1 #6
-
- Senior Member
- 116 posts
0
Neutral
Posted 26 December 2017 - 15:09
I'm using nc+ card (cameleon) directly in box reader that's why there is no problem with CI+. When I tested FCC on other images the channels zapping very fast.
PLi is my favorite image that's why I'm asking about the plugin with the same functionality as FCC.
Regards,
DJWeed
Re: Fast channel change (FCC) plugin in Pli6.1 #7
-
- PLi® Core member
- 57,158 posts
+698
Excellent
Posted 26 December 2017 - 15:39
You always continuiusly 2-4 channels for FCC... it is fine when someone offers the right structured patch. The one otter images accepted was not accepted here..
And for our dutchman the feature does not work as our cards go black within one or two hours zapping around..
FCC is not really fast zapping. In fact you receive more services at once... and switch the output to a service already tunes.
And for our dutchman the feature does not work as our cards go black within one or two hours zapping around..
FCC is not really fast zapping. In fact you receive more services at once... and switch the output to a service already tunes.
Edited by littlesat, 26 December 2017 - 15:53.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Fast channel change (FCC) plugin in Pli6.1 #8
-
- Senior Member
- 116 posts
0
Neutral
Posted 26 December 2017 - 18:13
I know how the FCC works. Many people in Poland for example using FCC when they use local card in internal reader. Will be great if FCC will be available in PLi, people in Netherlands for example may disable this function if don't work properly with Dutch cards.
Regards,
DJWeed
Re: Fast channel change (FCC) plugin in Pli6.1 #9
-
- PLi® Core member
- 57,158 posts
+698
Excellent
Posted 26 December 2017 - 18:23
Maybe when something in Poland can make it in a proper wat with a nice FCC pretjne Function and switch to encoder output Function so basically the fcc smart stuff could be arranged in python..
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Fast channel change (FCC) plugin in Pli6.1 #10
-
- PLi® Contributor
- 6,181 posts
+261
Excellent
Posted 26 December 2017 - 18:42
Just a question, what will you make in your life with the few milliseconds that this FCC will allows you to win?
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Fast channel change (FCC) plugin in Pli6.1 #11
-
- Senior Member
- 116 posts
0
Neutral
Posted 26 December 2017 - 18:51
It's not a point of discussion, guys. FCC makes a good impression when the channels are zapping. I just asked about possibility of implementation FCC in PLi images. If impossible just answer like that and end of discussion.
Regards,
DJWeed
Re: Fast channel change (FCC) plugin in Pli6.1 #12
-
- PLi® Core member
- 70,497 posts
+1,810
Excellent
Posted 26 December 2017 - 19:02
Nothing is impossible.
It is a matter of listing the plusses and the minusses of a feature, and with the result find someone who is willing to spend their spare time implementing it.
The result of this is that for the moment, we see not a lot of plusses (it only works for a specific group of people, and only for boxes with plenty of tuners), quite a few minusses (it will result in a lot of disabled smartcards or server connections due to excessive requests), and not a massive improvement in zap time.
And this means we're willing to look at it if someone provides the correct code for it, but we will not spend any of our free time on it.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Fast channel change (FCC) plugin in Pli6.1 #13
-
- Senior Member
- 116 posts
0
Neutral
Posted 26 December 2017 - 19:29
Maybe the best way is to ask in vuplus for a code? Functionality of FCC is also encrypted in enigma2, maybe if You ask someone from vuplus can develop the codes for FCC?
Regards,
DJWeed
Re: Fast channel change (FCC) plugin in Pli6.1 #14
-
- PLi® Core member
- 70,497 posts
+1,810
Excellent
Posted 26 December 2017 - 20:12
We have the vuplus code. But its implementation sucks big time, this was already mentioned earlier.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Fast channel change (FCC) plugin in Pli6.1 #15
-
- PLi® Core member
- 57,158 posts
+698
Excellent
Posted 26 December 2017 - 20:14
Beside the special tuners you also need unicable or jess lnbs
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Fast channel change (FCC) plugin in Pli6.1 #16
-
- Senior Member
- 116 posts
0
Neutral
Posted 26 December 2017 - 20:16
I hope You will find some time to implementation this functionality.
Regards,
DJWeed
Re: Fast channel change (FCC) plugin in Pli6.1 #17
-
- Senior Member
- 3,480 posts
+43
Good
Posted 26 December 2017 - 20:51
Perhaps this FCC can work for Ziggo cards?
"It will NOT result in a lot of disabled smartcards or server connections due to excessive requests" 
Nothing is impossible.
It is a matter of listing the plusses and the minusses of a feature, and with the result find someone who is willing to spend their spare time implementing it.
The result of this is that for the moment, we see not a lot of plusses (it only works for a specific group of people, and only for boxes with plenty of tuners), quite a few minusses (it will result in a lot of disabled smartcards or server connections due to excessive requests), and not a massive improvement in zap time.
And this means we're willing to look at it if someone provides the correct code for it, but we will not spend any of our free time on it.
2 x vu+ultimo4k ((nb & 9.0r) dvb-c fbc + 1 dvb-s2) + een vu+duo4k ((nb) fallbackclient) met een Synology ds214+ (2 x 6 TB) op DSM 7.1.1 in ziggo oost (voormalig @Home) + A1/A2/A3/HB (TechniSat)
Re: Fast channel change (FCC) plugin in Pli6.1 #18
-
- Senior Member
- 1,127 posts
+34
Good
Posted 26 December 2017 - 21:49
Hi,
Beside the special tuners you also need unicable or jess lnbs
No. You only need a lot of tuner at least 3 better a lot more and they do not have to be FBC ones. For FBC you also do not really need unicable.
ciao
Edited by Trial, 26 December 2017 - 21:50.
Re: Fast channel change (FCC) plugin in Pli6.1 #19
-
- PLi® Core member
- 57,158 posts
+698
Excellent
Posted 26 December 2017 - 22:17
Without unicable/Jess fcc gets limited...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Fast channel change (FCC) plugin in Pli6.1 #20
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 27 December 2017 - 07:26
Without unicable/Jess fcc gets limited...
Beside the special tuners you also need unicable or jess lnbs
Hi,
Beside the special tuners you also need unicable or jess lnbs
No. You only need a lot of tuner at least 3 better a lot more and they do not have to be FBC ones. For FBC you also do not really need unicable.
ciao
The 'need' for Unicable for the FBC-setup depends on the provider; if he neatly offers his services on one 'quadrant' (Hor/Ver - High/Low) there is no need for any sophisticated LNB-setup.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
