26 replies to this topic

[essco]

Hello. Just flash 6.1. 

With 6.0 positioner movement was corectly showed on screen. Now, only sometimes and with errors. One exemple: "from 13 est to 13 est" is on screen, even if positioner moves from 13 to 16.

VU+ Solo2.

Edited by essco, 6 January 2018 - 20:41.

[2pat]

Same on Zgemma H7S, no motor movement indication at all.

 

 

2pat

[WanWizard]

I thought that was fixed in rc?

[littlesat]

The dish is turning as it should be? So it is only what is shown in your screen what is incorrect?

[essco]

Have you ever used the positioner? When you turn the dish, on screen is a symbol of a dish with a text: "dish is moving from .... to... " and, very usefull, elapsed time when the dish reach out the new position.

Now, in 6.1, no indication on screen. Of course, I set the software to show the position.

 

The dish is turninig correctly.

But no indication on screen

Edited by essco, 7 January 2018 - 10:36.

[littlesat]

Infon’t have a rotor anymore, which means almost not possible for me to debug it.
Dimitrij has to look into this. I througt hè fixed it...
Which skin are you using? Can you post Some logs here in debug level 4?

Edited by littlesat, 7 January 2018 - 10:42.

[essco]

Skin: PLi-FullHD but tried with PLi-FullNightHD, PLi-HD, PLi-HD1, PLi-HD2.

I don't know how to find that log, but I will document myself in the next minutes and I will come back with it.

Thank you!

[littlesat]

Login on your box via console (telnet, putty) type
Init 4
ENIGMA_DEBUG_LVL=4 enigma2

[essco]

OK, just a moment.

Edited by essco, 7 January 2018 - 11:29.

[Dimitrij]

For 6.1 need add this patch

https://github.com/O...9d2fa0552bc618f

[mattiL]

After Init 4, not work:
 
root@vusolo2:~# Init 4 
-sh: Init: not found   
root@vusolo2:~#

Type ’init 4’ instead, commands being case sensitive..

[Rob van der Does]

Infon’t have a rotor anymore, which means almost not possible for me to debug it.

Yes, you can, as I've told you several times before. Just tell E2 you've got a motor and E2 will believe you!

[essco]

OK, I stopped the process with ctrl+c, started E2 with init 3, but whre is the file? It is not in   /home  

[Dimitrij]

OK, I stopped the process with ctrl+c, started E2 with init 3, but whre is the file? It is not in   /home  

see https://forums.openp...ndpost&p=824819

[essco]

Yes, Dimitrj, I saw it, but ... I don't know how to use the information 

By the way, I do not have folder "python" in "lib". 

[littlesat]

Just voor and paste the important stuff from the console

[essco]

Could be wrong, but I creeated a file .text.  I copied all 405 lines from https://github.com/O...Screens/Dish.py , changed name of the file in dish.py then put it in lib/python/screens (I created the folders), with no results.

[ricki]

Yes, it works with patch.

[essco]

How to use the patch? Excuse my ignorance.

[WanWizard]

For 6.1 need add this patch

https://github.com/O...9d2fa0552bc618f

 

Grmblll... How come this isn't in 6.1, it is from before the rc was created?

 

I've cherry picked it, will be in 6.1-release after the next build.

Edited by WanWizard, 7 January 2018 - 13:48.