4 replies to this topic

[fennec]

Hi, i use openpli 6.1 with my DUO2

 

HDMI CEC active with sony TV and Yamaha audio and i use remote TV

 

I have a problem with hdmi CEC only when i record a program and i watch another

 

List of channel appear on TV like push arrow down or up  on remote but i push nothing

 

I make a logfile

 

Rx: 20:01:15                              <  44 00 

Rx: 20:01:16                              <  45 

Rx: 20:01:16                              <  45 

Rx: 20:01:19                              <  44 02 

Rx: 20:01:19                              <  45 

Rx: 20:01:21                              <  44 0D 

Rx: 20:01:21                              <  45 

Rx: 20:01:31                              <  54 

Rx: 20:01:46                              <  53 

Rx: 20:01:55  <Give Device Power Status>  <  8F 

Tx: 20:01:55  <Report Power Status>       >  90 00                                              [0x00]

Rx: 20:02:02                              <  44                             when duo receive this command list of channel appear on screen

Rx: 20:02:11                              <  44 0D                       i make a exit 

Rx: 20:02:12                              <  45 

Rx: 20:02:16                              <  54 

Rx: 20:02:27                              <  44 02                        i make push down to appear list of channel

Rx: 20:02:27                              <  45 

Rx: 20:02:28                              <  44 0D 

Rx: 20:02:28                              <  45 

Rx: 20:02:31                              <  4C

 

 

So when DUO2 receive RX < 44  list channel appear, and only when i record a channel 

 

How can i do for ignore "44" just action when "44 XX"

 

Thanks a lot for your help

[Pr2]

Hi,

 

Which remote control are you using?  The one from the STB or the one from the TV?

 

In menu have you tried to set:  Use TV remote control  to No

 

I never had very good experience using the TV remote to control my STB over HDMI-CEC, so I prefer to use the STB remote control.

 

Pr2

[fennec]

Thanks pr2

Yes i use remote tv, android tv so most completely than vu+

I try change hdmi cable nothing

In record mode i have phantom effect when vu reveive 44

[Pr2]

Hi,

 

From my own experience using the TV remote to control a STB never works properly, code are different since every TV manufacturers implement it on its own way and give it them a specific name, using the TV remote control to control HDMI connected device only works if you stay on the same brand. Mixing brand usually don't work as expected.

 

Pr2

[fennec]

And adapted hdmicec.py for ignore command 44