Posted 28 January 2018 - 21:26
OK, so there are solutions before OpenPLi implements the feature used in OpenATV.
I will probably go for betacentauri's option 2 because I would rather keep my main image (slot 1) for OpenPLi unless OpenPLi is going to expand their Multiboot option soon - then I will wait.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 28 January 2018 - 21:36
Other option: wait until we've added the remaining features to the flash image" menu.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 28 January 2018 - 22:32
So double flash slots 1 & 2 with OpenATV and then flash slot 1 with OpenPli..... providing you backup settings, you are probably talking of a few minutes to do it.OK, so there are solutions before OpenPLi implements the feature used in OpenATV.
I will probably go for betacentauri's option 2 because I would rather keep my main image (slot 1) for OpenPLi unless OpenPLi is going to expand their Multiboot option soon - then I will wait.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 30 January 2018 - 12:01
So I reverted, all but the emmc change in this commit :
https://github.com/H...651c5cee021487f
The only difference is that the current OpenPli build now has IMAGE_FSTYPES = +="hd-emmc tar.bz2" from "hd-emmc"
and the original 2 commands for the tar.bz2:
tar -cvf ${IMGDEPLOYDIR}/${IMAGEDIR}/rootfs.tar -C ${IMAGE_ROOTFS} .; \
bzip2 -f ${IMGDEPLOYDIR}/${IMAGEDIR}/rootfs.tar; \
replaced with a copy command.
Ran my updated (with the reverted code) build .... and everything works and flashed without issue.
Somewhere in the build (cannot see where) changing the FSTYPE means that the system handles the tar.bz2 compression with a "tool" that does not work on my system!!
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 28 August 2018 - 22:13
Other option: wait until we've added the remaining features to the flash image" menu.
I have had no chance to fiddle with mu HD51 over the last several months and I am not up-to-date with things.
Has the feature been added to OpenPLi 6.2? I am talking about FLASH IMAGE utility where we could flash other images in slots 2-4.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 29 August 2018 - 06:08
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 30 August 2018 - 19:49
I have downloaded the latest openpli-6.2-release-hd51-20180827_usb.zip and I'm quite surprised with the content of the zip:
disk.img - about 200 MB
imageversion - 1 KB
Where is rootfs, kernel etc?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 30 August 2018 - 20:20
Was reported some time ago, but I've been on holiday, I'll try to have a look over the weekend.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 30 August 2018 - 20:39
All the latest 3 6.2 images available on your website looik the same.
Even the old 6.1 image looks the same.
Perhaps this is normal and files like rootfs or kernel are included in disk.img?
Can this be flashed or not?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 30 August 2018 - 20:48
Posted 30 August 2018 - 20:54
I'm not sure what is being looked at.
On the buildserver, the multiboot zip contains imageversion, kernel.bin and rootfs.tar.bz2. Are you trying to flash a standard USB image into multiboot?
edit: the multiboot zips on the download server also contain these files.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 30 August 2018 - 21:27
I would like to flash an OpenPLi image to completely replace the default image as it comes from the shop.
Should I go for for USB or MULTIBOOT version of the OpenPLi image in this case?
The MULTIBOOT version indeed contains kernel and rootfs files but USB version only contains disk.img.
After flashing OpenPLI I would like to be able to flash another image into one of the slots 2-4. That's it.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 30 August 2018 - 21:39
You can install OpenATV from openpli by putting the image in the root of the USB as ZIP file as you download it from their website... so not unpacked... You can find it via the downloaded_images expension.
Edited by littlesat, 30 August 2018 - 21:40.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 30 August 2018 - 21:51
Yes, but first I want to clean-install OpenPLI.
Do I go for MULTIBOOT or USB version of OpenPLi?
What strikes me is the fact that USB version does not have rootfs or kernel files. Instead if has disk.img file.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 30 August 2018 - 22:15
Edited by twol, 30 August 2018 - 22:17.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 30 August 2018 - 22:45
Posted 6 September 2018 - 09:19
You can install OpenATV from openpli by putting the image in the root of the USB as ZIP file as you download it from their website... so not unpacked..
I understand these will be OK?
http://images.mynonp...p?open=mutant51
The OpenATV ZIP contains hd51 folder which contains disk.img, imageversion, kernel.bin and rootfs.tar.bz2 files.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 6 September 2018 - 10:42
You can install OpenATV from openpli by putting the image in the root of the USB as ZIP file as you download it from their website... so not unpacked..
I understand these will be OK?
http://images.mynonp...p?open=mutant51
The OpenATV ZIP contains hd51 folder which contains disk.img, imageversion, kernel.bin and rootfs.tar.bz2 files.
All OE-A image zips for the HD51 contain a disk image, kernel and root files, so you can USB & Online flash. OpenPli provides a usb image flash zip (disk.img) and a multiboot image zip (kernel plus root)
Edited by twol, 6 September 2018 - 10:43.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 12 September 2018 - 18:33
You can install OpenATV from openpli by putting the image in the root of the USB as ZIP file as you download it from their website... so not unpacked... You can find it via the downloaded_images expension.
downloaded_images?
I'm afraid I cannot see that.
I downloaded the following file: openatv-6.2-mutant51-20180907_usb and put it in the root of my Kingston USB and it is not in the Flash Image utility.
1_0_1_7D3_22C4_13E_820000_0_0_0_20180912193138.jpg 62.8KB
3 downloads
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 12 September 2018 - 20:48
You can install OpenATV from openpli by putting the image in the root of the USB as ZIP file as you download it from their website... so not unpacked... You can find it via the downloaded_images expension.
downloaded_images?
I'm afraid I cannot see that.
I downloaded the following file: openatv-6.2-mutant51-20180907_usb and put it in the root of my Kingston USB and it is not in the Flash Image utility.
You must replace mutant51 with hd51 in image title.
0 members, 1 guests, 0 anonymous users
