2740 replies to this topic

[MastaG]

Yeah I need to revert that change. Will post new images later today.

Apologies!

[Persian Prince]

Yeah I need to revert that change. Will post new images later today.

Apologies!

python-pycparser_2.%.bbappend is ok now: https://github.com/O...701b9fdb64eceb3 so dreambox images are ok too

 

Please use https://github.com/PLi-metas so we can do things easily in one place

[Persian Prince]

These are test versions without online feeds so don't expect much as it's just for test!

 

develop branch (pyro) so you could say Open PLi 6.x with latest enigma2 and gstreamer.

 

dm500hd : http://www.mediafire...dm500hd.nfi.zip

 

dm800 : http://www.mediafire...d-dm800.nfi.zip

 

dm800se : http://www.mediafire...dm800se.nfi.zip

 

I did compile these images using https://github.com/P...etas/meta-dream

 

[MastaG]

Ah you beat me to it

 

Anyways, here are the same images for dm800, dm800se, dm500hd:

https://mega.nz/#F!P...7qtMJZ1RYXaJ9qw

 

(also spark and spark7162.. but they don't belong in this forum thread )

[szili_boy]

 

Thanks for the compiles.

 

Tried to flash the dm520 image for my dm525 (basically is the same as dm520) gives a boot image too big fatal error.

New test image is ready: http://www.mediafire...0.rootfs.tar.xz

 

Please test and let us know

 

The error was the same shown by @daimon.

As I understood it is just a script error and the image shall work fine.

I will test it this evening.

[szili_boy]

 

Thanks for the compiles.

 

Tried to flash the dm520 image for my dm525 (basically is the same as dm520) gives a boot image too big fatal error.

New test image is ready: http://www.mediafire...0.rootfs.tar.xz

 

Please test and let us know

 

After flashing the image and ignoring the script error the box was not booting.

It didn't sent any picture to HDMI. Luckily telnet was working so I could use the to-the*rescue command.

[Persian Prince]

 

 

Thanks for the compiles.

 

Tried to flash the dm520 image for my dm525 (basically is the same as dm520) gives a boot image too big fatal error.

New test image is ready: http://www.mediafire...0.rootfs.tar.xz

 

Please test and let us know

 

After flashing the image and ignoring the script error the box was not booting.

It didn't sent any picture to HDMI. Luckily telnet was working so I could use the to-the*rescue command.

 

So the image won't work for dm525, We need to test it on a dm520 too ...

[jhonc]

Hi

tried latest buid for dm800 from both link provided

now all is ok,  but initializing a usb flash as hdd  failed  process stops at 48% with error from link (tried different usb storage)

 

 

https://postimg.org/image/9x94ouoh1/

​also flashdisk not workig

[fairbird]

@jhonc

Try this plugin works fine on DM800.

https://forums.openp...er-for-openpli/

[Matselino]

Hello, dear MastaG, thanks for your great work!

-Unofficial- Gstreamer 1.9 images 2016-06 -based on- OpenPLi 4. Jour IMG is fantastic. I have DM 800HD SE v.1, original. Can you help me ?
Download: http://jam2.japhar.com/images/pli/. Not here

-Unofficial- Gstreamer 1.9 images 2016-06 -based on- OpenPLi 4. Help me find it. Best of luck!!!

[MastaG]

Guys.. like we said.. These test images are "as-is" without a feed server.

I know people like to use some flash expander so they can install iptvplayer, exteplayer3, gstplayer, serviceapp whatever...

But as we don't have/host a feed, you'll need to build and host the feed yourself.

 

Old packages from my old images will not work as they've been built using an older version of oe-core.

So please let the old gstreamer images rest.

Edited by MastaG, 9 February 2018 - 09:53.

[Persian Prince]

I think we can have feeds for all dreamboxes if somebody could provide us free hosting then we can just upload files

[athoik]

Check "infinity free"

[Matselino]

MastaG, wlan rtl8187 does not work. DM 800HD SE.

[fairbird]

try this file from my images feed ..

 

Attached Files

•  kernel-module-rtl8187-3.2-dm800se_3.2-r14.19.67_dm800se.ipk   25.65KB   6 downloads

[jhonc]

@jhonc

Try this plugin works fine on DM800.

https://forums.openp...er-for-openpli/

hello

when installing devicemanger got following error and in the end the plugin is installed partialy:

 

Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/bin/armv7l/exfatfsck': Can't restore time                  
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/__init__.py': Can't restore time                           
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/plugin.py': Can't restore time                             
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/MountPoints.py': Can't restore time                        
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/HddSetup.py': Can't restore time                           
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/HddPartitions.py': Can't restore time                      
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/HddMount.py': Can't restore time                           
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/HddInfo.py': Can't restore time                            
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/ExtraMessageBox.py': Can't restore time                    
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/ExtraActionBox.py': Can't restore time                     
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
gins/DeviceManager/bin/armv7l/exfatfsck': Can't restore time                  
Warning when extracting archive entry '/usr/lib/enigma2/python/Plugins/SystemPl
g                           
Configuring enigma2-plugin-systemplugins-devicemanager.                       
root@dm800:~#

 

also when tryng to install flash expander got same error with       ​"Cant restore time"

[fairbird]

That message just warring (Don't wary)

We had fixed that issue on rocko branch I Think we need to fix it on develop branch also.

https://github.com/M...274d7fb029ae301

Edited by fairbird, 10 February 2018 - 17:34.

[simon]

Hi, I have a dm 8000 but I can not download the image for her.

[andrey1961]

 

Ah you beat me to it

 

Anyways, here are the same images for dm800, dm800se, dm500hd:

https://mega.nz/#F!P...7qtMJZ1RYXaJ9qw

 

(also spark and spark7162.. but they don't belong in this forum thread )

 

Hi dear MastaG.

Thanks for you hard work.

I have testing 7111 image on my spark reloading box. All working fine but Hotkeys doznt working. Trying to get Hotkeys from menu is causing green screen with next log:

"File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 263, in __init__
AttributeError: 'HotkeySetup' object has no attribute 'toggleAdditionalKeys' "

 

Could you help resolving this problem?

[Matselino]

MastaG, 

I found your simple PPanel script for moving the entire internal flash to an external storage device such as internal hdd or usb disk. 

Can I use it here?

Thanks for you hard work.