Hello ,
I passed all the steps but this command at the terminal ...
MACHINE = dm800 bitbake openpli-enigma2-image
he gives me this error:
OE-core's sanity checker config detected a potential misconfiguration.
Either fix the cause of this error or your own risk disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
Do not use Bitbake as root.
Summary: There were 1 ERROR messages shown, returning a non-zero exit code
Any ideas
thank you
ubuntu 18.0.4 lts
Howto build unofficial pli for your unsupported receiver
Re: Howto build unofficial pli for your unsupported receiver #81
Posted 18 February 2018 - 23:33
Re: Howto build unofficial pli for your unsupported receiver #82
Posted 19 February 2018 - 07:08
Hello ,
I passed all the steps but this command at the terminal ...
MACHINE = dm800 bitbake openpli-enigma2-image
he gives me this error:
OE-core's sanity checker config detected a potential misconfiguration.
Either fix the cause of this error or your own risk disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
Do not use Bitbake as root.
Summary: There were 1 ERROR messages shown, returning a non-zero exit code
Any ideas
thank you
ubuntu 18.0.4 lts
It says, you should not run bitbake as "root".
Instead run it as a regular user.
Re: Howto build unofficial pli for your unsupported receiver #83
Posted 19 February 2018 - 08:23
bumperbee,
If needed, I can add my own read me on how to do it, but I do not take the responsibility to begin to teaching how to do all that. However, you have to start somewhere. You will definitely get sooner or later to a dead end, but it is normal.
Ok, i try again
Re: Howto build unofficial pli for your unsupported receiver #84
Re: Howto build unofficial pli for your unsupported receiver #85
Re: Howto build unofficial pli for your unsupported receiver #86
Posted 19 February 2018 - 14:08
OK "meta-ini" now supports:
- atemio5x00
- atemio6000
- atemio6100
- atemio6200
- atemionemesis
- beyonwizt2
- beyonwizt3
- beyonwizt4
- bwidowx
- bwidowx2
- evoslim
- heroboxex4hd
- mbhybrid
- mbmini
- mbminiplus
- mbtwin
- mbultra
- opticumtt
- sezam1000hd
- sezam5000hd
- sezammarvel
- ventonhdx
- xpeedlx
- xpeedlx3
- xsolomini3
New "meta-odin" added:
- axase3
- axase3c
- axodin
- axodinc
- classm
- evo
- evoe3hd
- galaxym6
- genius
- geniuse3hd
- maram9
- starsatlx
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #87
Posted 19 February 2018 - 14:18
Just keep in mind that for Open WebIF remote and pictures we need to provide https://github.com/O...nwebif.bbappend + needed files.
For enigma2 rc we need to provide https://github.com/O...s/rc_models.cfg + needed files.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #88
Posted 19 February 2018 - 15:21
When using pli-extras, a new version of the OpenWebif plugin will get installed called: enigma2-plugin-extensions-openwebif-extras
I've created this as a common package so it can cover all of our extra BSP-layers (dreambox, fulan, ini, odin and raspberry).
(only dreambox and fulan have been added though)
See: https://github.com/P...webif-extras.bb
It will automatically replace the enigma2-plugin-extensions-openwebif package when using pli-extras.
So I guess for rc_models.cfg we could create another common patch against PLi's enigma2 ?
Re: Howto build unofficial pli for your unsupported receiver #89
Posted 20 February 2018 - 19:47
Makefile:66: recipe for target 'charmap-dir.o' failed
| make: *** [charmap-dir.o] Error 1
| make: *** Waiting for unfinished jobs....
| Makefile:66: recipe for target 'charmap.o' failed
| make: *** [charmap.o] Error 1
| WARNING: /home/carlos/openpli-oe-core/build/tmp/work/i686-linux/cross-localedef-native/2.25-r0/temp/run.do_compile.29332:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /home/carlos/openpli-oe-core/build/tmp/work/i686-linux/cross-localedef-native/2.25-r0/temp/log.do_compile.29332)
ERROR: Task (/home/carlos/openpli-oe-core/openembedded-core/meta/recipes-core/glibc/cross-localedef-native_2.25.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3848 tasks of which 2625 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/carlos/openpli-oe-core/openembedded-core/meta/recipes-core/glibc/cross-localedef-native_2.25.bb:do_compile
Summary: There were 12 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
Re: Howto build unofficial pli for your unsupported receiver #90
Posted 20 February 2018 - 21:54
Makefile:66: recipe for target 'charmap-dir.o' failed
| make: *** [charmap-dir.o] Error 1
| make: *** Waiting for unfinished jobs....
| Makefile:66: recipe for target 'charmap.o' failed
| make: *** [charmap.o] Error 1
| WARNING: /home/carlos/openpli-oe-core/build/tmp/work/i686-linux/cross-localedef-native/2.25-r0/temp/run.do_compile.29332:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /home/carlos/openpli-oe-core/build/tmp/work/i686-linux/cross-localedef-native/2.25-r0/temp/log.do_compile.29332)
ERROR: Task (/home/carlos/openpli-oe-core/openembedded-core/meta/recipes-core/glibc/cross-localedef-native_2.25.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3848 tasks of which 2625 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/carlos/openpli-oe-core/openembedded-core/meta/recipes-core/glibc/cross-localedef-native_2.25.bb:do_compile
Summary: There were 12 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
Try adding the following line to your site.conf:
LOCALE_GENERATION_WITH_CROSS-LOCALEDEF_forcevariable = "0"
Re: Howto build unofficial pli for your unsupported receiver #91
Posted 21 February 2018 - 00:46
WARNING: /home/carlos/openpli-oe-core/pli-extras/meta-fulan/recipes-drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules.conf: file could not be found
WARNING: /home/carlos/openpli-oe-core/pli-extras/meta-fulan/recipes-drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules-conf.conf: file could not be found
WARNING: /home/carlos/openpli-oe-core/pli-extras/meta-fulan/recipes-drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules.conf: file could not be found
WARNING: /home/carlos/openpli-oe-core/pli-extras/meta-fulan/recipes-drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules-conf.conf: file could not be found
ERROR: ExpansionError during parsing /home/carlos/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam.bb
Traceback (most recent call last):
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 412, in DataSmart.expandWithRefs(s='svn${SRCPV}', varname='PV'):
try:
> s = __expand_var_regexp__.sub(varparse.var_sub, s)
try:
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 111, in VariableParse.var_sub(match=<_sre.SRE_Match object; span=(3, 11), match='${SRCPV}'>):
else:
> var = self.d.getVarFlag(key, "_content")
self.references.add(key)
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 794, in DataSmart.getVarFlag(var='SRCPV', flag='_content', expand=True, noweakdefault=False, parsing=False):
cachename = var + "[" + flag + "]"
> value = self.expand(value, cachename)
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 436, in DataSmart.expand(s='${@bb.fetch2.get_srcrev(d)}', varname='SRCPV'):
def expand(self, s, varname = None):
> return self.expandWithRefs(s, varname).value
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 426, in DataSmart.expandWithRefs(s='${@bb.fetch2.get_srcrev(d)}', varname='SRCPV'):
except Exception as exc:
> raise ExpansionError(varname, s, exc) from exc
bb.data_smart.ExpansionError: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/carlos/openpli-oe-core/openembedded-core/scripts:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/bin/mipsel-oe-linux:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot/usr/bin/crossscripts:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/sbin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/bin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/sbin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/bin:/home/carlos/openpli-oe-core/bitbake/bin:/home/carlos/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/carlos"; LANG=C LC_ALL=C /usr/bin/env svn --non-interactive --trust-server-cert log --limit 1 --no-auth-cache http://www.streamboa...vn/oscam/trunk/ failed with exit code 1, output:
svn: E175013: Access to '/svn/oscam/trunk' forbidden
Edited by lilo74, 21 February 2018 - 00:48.
Re: Howto build unofficial pli for your unsupported receiver #92
Posted 21 February 2018 - 08:51
WARNING: /home/carlos/openpli-oe-core/pli-extras/meta-fulan/recipes-drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules.conf: file could not be found
WARNING: /home/carlos/openpli-oe-core/pli-extras/meta-fulan/recipes-drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules-conf.conf: file could not be found
WARNING: /home/carlos/openpli-oe-core/pli-extras/meta-fulan/recipes-drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules.conf: file could not be found
WARNING: /home/carlos/openpli-oe-core/pli-extras/meta-fulan/recipes-drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules-conf.conf: file could not be found
ERROR: ExpansionError during parsing /home/carlos/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam.bb
Traceback (most recent call last):
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 412, in DataSmart.expandWithRefs(s='svn${SRCPV}', varname='PV'):
try:
> s = __expand_var_regexp__.sub(varparse.var_sub, s)
try:
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 111, in VariableParse.var_sub(match=<_sre.SRE_Match object; span=(3, 11), match='${SRCPV}'>):
else:
> var = self.d.getVarFlag(key, "_content")
self.references.add(key)
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 794, in DataSmart.getVarFlag(var='SRCPV', flag='_content', expand=True, noweakdefault=False, parsing=False):
cachename = var + "[" + flag + "]"
> value = self.expand(value, cachename)
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 436, in DataSmart.expand(s='${@bb.fetch2.get_srcrev(d)}', varname='SRCPV'):
def expand(self, s, varname = None):
> return self.expandWithRefs(s, varname).value
File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 426, in DataSmart.expandWithRefs(s='${@bb.fetch2.get_srcrev(d)}', varname='SRCPV'):
except Exception as exc:
> raise ExpansionError(varname, s, exc) from exc
bb.data_smart.ExpansionError: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/carlos/openpli-oe-core/openembedded-core/scripts:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/bin/mipsel-oe-linux:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot/usr/bin/crossscripts:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/sbin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/bin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/sbin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-softcams-oscam/fetcheravoidrecurse-r0/recipe-sysroot-native/bin:/home/carlos/openpli-oe-core/bitbake/bin:/home/carlos/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/carlos"; LANG=C LC_ALL=C /usr/bin/env svn --non-interactive --trust-server-cert log --limit 1 --no-auth-cache http://www.streamboa...vn/oscam/trunk/ failed with exit code 1, output:
svn: E175013: Access to '/svn/oscam/trunk' forbidden
Change the SRC_URI line in these two files:
meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam.bb
meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam-emu.bb
to:
SRC_URI = "svn://www.oscam.cc/svn/oscam-mirror;protocol=http;module=trunk;scmdata=keep"
Re: Howto build unofficial pli for your unsupported receiver #93
Posted 21 February 2018 - 10:31
@MastaG
Would you please test our oscam mirror?
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #94
Re: Howto build unofficial pli for your unsupported receiver #95
Posted 21 February 2018 - 11:22
oscam mirror is ok, I get now another error, Linux Mint 17 Qiana on Oracle VM VirtualBox (Win8.1)
I think the kernel in your Linux Mint 17 is either too old or the glibc/kernel headers are not properly installed.
See: https://stackoverflo...-setattr-undecl
Try updating your kernel and installing the latest kernel and glibc headers.
Something like:
sudo apt-get install linux-headers-$(uname -r)
If the error persists you could try to add the following line to your site.conf:
EXTRA_OECONF_append_util-linux = " --disable-schedutils"
Re: Howto build unofficial pli for your unsupported receiver #96
Re: Howto build unofficial pli for your unsupported receiver #97
Posted 21 February 2018 - 15:03
Updated test builds for Spark7111/7162:
I try to make the images as close to original PLi as possible
- Built using pli-extras steps from the opening post
- Synced with latest (todays) PLi enigma2 develop branch
- Updated FFMPEG to 3.4.2
- Fixed screenshot feature in OpenWebIf
- Fixed GSOD in InfoBar and HotKey setup
- Fixed picon installation from Plugin Browser
- Using OE-A's pti driver for descrambling
- Synced wizard code with PLi so E2 reloads after selecting language
- Default to PLi HD skin
- Pre-installed packages: oscam, iptvplayer (+deps), exteplayer3, serviceapp and youtube
TODO (feature requests):
- Look into the webbrowser plugin for HbbTV
- Properly rip out OpenATV's fade-in/out infobar feature
Note:
* There is no feed server available (as I don't have one), so you'll have to find your third-party plugins somewhere else !
* There is no gstreamer included with my spark images as they're too slow for it, so the playback system uses libeplayer3 by default (thx to Taapat).
Download:
Edited by MastaG, 21 February 2018 - 15:10.
Re: Howto build unofficial pli for your unsupported receiver #98
Re: Howto build unofficial pli for your unsupported receiver #99
Posted 21 February 2018 - 15:24
ERROR: cross-localedef-native-2.25-r0 do_compile: oe_runmake failed
ERROR: cross-localedef-native-2.25-r0 do_compile: Function failed: do_compile (log file is located at /home/carlos/openpli-oe-core/build/tmp/work/i686-linux/cross-localedef-native/2.25-r0/temp/log.do_compile.16351)
ERROR: Logfile of failure stored in: /home/carlos/openpli-oe-core/build/tmp/work/i686-linux/cross-localedef-native/2.25-r0/temp/log.do_compile.16351
Re: Howto build unofficial pli for your unsupported receiver #100
Posted 21 February 2018 - 15:29
And what does that log file say?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
33 user(s) are reading this topic
0 members, 33 guests, 0 anonymous users