2740 replies to this topic

[MastaG]

 ERROR: cross-localedef-native-2.25-r0 do_compile: oe_runmake failed
ERROR: cross-localedef-native-2.25-r0 do_compile: Function failed: do_compile (log file is located at /home/carlos/openpli-oe-core/build/tmp/work/i686-linux/cross-localedef-native/2.25-r0/temp/log.do_compile.16351)
ERROR: Logfile of failure stored in: /home/carlos/openpli-oe-core/build/tmp/work/i686-linux/cross-localedef-native/2.25-r0/temp/log.do_compile.16351

Did you add this to your site.conf?

LOCALE_GENERATION_WITH_CROSS-LOCALEDEF_forcevariable = "0"

[fairbird]

Please share ffmpeg 3.4.2 recipes ..

Thank you

[MastaG]

Please share ffmpeg 3.4.2 recipes ..

Thank you

https://github.com/O...e-core/pull/419

It's still waiting to be reviewed by someone.

Anyways, SSS has improved DASH support and rebased on 3.4.2.

 

I've cleaned the remaining patches.

[pop1234]

thx MastaG

[vassili_47]

Thank you MastaG

[lilo74]

more error:

 

WARNING: libssh-0.7.3-r0 do_fetch: Failed to fetch URL git://git.libssh.org/projects/libssh.git;branch=v0-7, attempting MIRRORS if available
WARNING: enigma2-plugin-systemplugins-autobouquetsmaker-2.1+gitAUTOINC+c9206a78a6-r2 do_package_qa: QA Issue: enigma2-plugin-systemplugins-autobouquetsmaker-src rdepends on enigma2, but it isn't a build dependency, missing enigma2 in DEPENDS or PACKAGECONFIG? [build-deps]
WARNING: enigma2-plugin-systemplugins-autobouquetsmaker-2.1+gitAUTOINC+c9206a78a6-r2 do_package_qa: QA Issue: enigma2-plugin-systemplugins-autobouquetsmaker rdepends on enigma2, but it isn't a build dependency, missing enigma2 in DEPENDS or PACKAGECONFIG? [build-deps]
WARNING: unrar-4.0.4-r0 do_populate_lic: unrar: No generic license file exists for: GPL in any provider
WARNING: python-yenc-0.3-ml1 do_fetch: Failed to fetch URL http://www.golug.it/...yenc-0.3.tar.gz, attempting MIRRORS if available
ERROR: python-yenc-0.3-ml1 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/python-yenc/0.3-ml1/recipe-sysroot-native/usr/bin/python-native:/home/carlos/openpli-oe-core/openembedded-core/scripts:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/python-yenc/0.3-ml1/recipe-sysroot-native/usr/bin/mipsel-oe-linux:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/python-yenc/0.3-ml1/recipe-sysroot/usr/bin/crossscripts:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/python-yenc/0.3-ml1/recipe-sysroot-native/usr/sbin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/python-yenc/0.3-ml1/recipe-sysroot-native/usr/bin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/python-yenc/0.3-ml1/recipe-sysroot-native/sbin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/python-yenc/0.3-ml1/recipe-sysroot-native/bin:/home/carlos/openpli-oe-core/bitbake/bin:/home/carlos/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/carlos"; /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/carlos/openpli-oe-core/sources 'http://www.golug.it/...yenc-0.3.tar.gz' --progress=dot -v failed with exit code 4, output:
--2018-02-21 13:06:00--  http://www.golug.it/...yenc-0.3.tar.gz
Resolving www.golug.it (www.golug.it)... failed: Name or service not known.
wget: unable to resolve host address ‘www.golug.it’

ERROR: python-yenc-0.3-ml1 do_fetch: Fetcher failure for URL: 'http://www.golug.it/...yenc-0.3.tar.gz'. Unable to fetch URL from any source.
ERROR: python-yenc-0.3-ml1 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/python-yenc/0.3-ml1/temp/log.do_fetch.10556
ERROR: Task (/home/carlos/openpli-oe-core/meta-openpli/recipes-devtools/python/python-yenc_0.3.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 7047 tasks of which 3996 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/carlos/openpli-oe-core/meta-openpli/recipes-devtools/python/python-yenc_0.3.bb:do_fetch
Summary: There were 156 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.

  /home/carlos/openpli-oe-core/meta-openpli/recipes-devtools/python/python-yenc_0.3.bb:do_fetch
Summary: There were 156 WARNING messages shown.
Summary: There were 3 ERROR messages shown,

[lilo74]

I have 1 file E3HD, but No run only stay in boot

[aouamed]

Thank you MastaG ...

[mrvica]

thanks @MastaG, this helped
sudo apt-get install linux-headers-$(uname -r)
though, I get other errors now , this or another github not reachable, I think we are too many now trying to access github, another question, are you going to upload on that mega.nz link all suppoprted receiver or was that only for spark, just in case I don´t succeed in building the image

[MastaG]

@lilo74 and @mrvica
Yes unfortunately some mirrors seem to be down causing packages to fail.
The reason why we don't notice is because you'll only have to download the source once for each package.
All downloads are stored in the 'sources' directory and unless the package recipe gets updated, you don't have to download again.
Please retry a few times. If it still fails I'll look into getting mirrors.

@mrvica
The spark images are just for testing since they use a different enigma2 code-base, in which I merge PLi's enigma2 from time to time.
All other receivers are using PLi's enigma2 from the develop branch so they're less likely to have bugs in them.

Since we have meta-ini and meta-odin now as well it's a bit too much for me to build for all receivers on regular base.

So it's best to try and build yourself so you can have an updated image whenever you like.
When an image has been built the next one will not take as long as many packages dont need rebuilding
Also this will help the official PLi builds as well by finding build-errors and such

But perhaps Persian Prince and I can do a one time build for all receivers in the near future so we can spread the load.
But it's not a promise as I'm going to be busy in the following weeks.

Edited by MastaG, 21 February 2018 - 23:05.

[el bandido]

I really appreciate the work and efforts of the developers, and that is a great list of receivers! Just wondering if the Octagon SF4008 could be added to the receiver build list?

 

Thanks.

[bumperbee]

I had reach to Step 5- “cd build”, but got stuck at this “source env.source” (attached file showing the process at Ubuntu Terminal). Thanks

 

Attached Files

•  22-2-18 Ubuntu Terminal.txt   17.46KB   49 downloads

[Persian Prince]

I really appreciate the work and efforts of the developers, and that is a great list of receivers! Just wondering if the Octagon SF4008 could be added to the receiver build list?
 
Thanks.

Anything for my old friend

I do remember LegitFTA and how kind you are, "meta-octagon" will be ready next week

[el bandido]

Oh Yeah?
Well....
I have not forgotten your contributions either.
 

Thanks Very Much!
 

[zeros]

Bumperbee, you need to install python3.
apt-get install python3
python3 -V

[bumperbee]

Thanks very much Zeros

[bumperbee]

Hi Zeros, didn’t make it, failed again as per attached, please teach me how to install python3. Thanks

[bumperbee]

Hi Zeros, didn’t make it, failed again as per attached, please teach me how to install python3. Thanks

 

Attached Files

•  22-2-18 UbuntuTerminal Pt2-Install python3.txt   832bytes   12 downloads

[catastrofus]

Use: sudo apt-get install python3

You need to have root privileges.

Edited by catastrofus, 22 February 2018 - 08:37.

[bumperbee]

Thanks very much Catastrofus