2740 replies to this topic

[ahmed gazye]

Hi thanks for testing.
However, since I have no satellite dish I've only tested the dvb-c tuner.
So you're saying you can't find any S2 channels on Eutelsat 16A?
Perhaps the satellites.XML file needs updating then?
 

 

Updated test builds for Spark7111/7162:
 
I try to make the images as close to original PLi as possible
 
- Built using pli-extras steps from the opening post
- Synced with latest (todays) PLi enigma2 develop branch
- Updated FFMPEG to 3.4.2
- Fixed screenshot feature in OpenWebIf
- Fixed GSOD in InfoBar and HotKey setup
- Fixed picon installation from Plugin Browser
- Using OE-A's pti driver for descrambling
- Synced wizard code with PLi so E2 reloads after selecting language
- Default to PLi HD skin
- Pre-installed packages: oscam, iptvplayer (+deps), exteplayer3, serviceapp and youtube
 
TODO (feature requests):
- Look into the webbrowser plugin for HbbTV
- Properly rip out OpenATV's fade-in/out infobar feature
 
Note:
* There is no feed server available (as I don't have one), so you'll have to find your third-party plugins somewhere else !
* There is no gstreamer included with my spark images as they're too slow for it, so the playback system uses libeplayer3 by default (thx to Taapat).
 
Download:
https://mega.nz/#F!q...w612u7VvgBH22tA

Thanks for this great work for Spark7111 / 7162There is a drawback to the version of the satellite. Eutelsat 16A is searched for channels s only and the channel is not searched for s2The rest of the satellites are searched for all frequencies

thanks one more time. for this great work for spark7111 / 7162 I own the Truman Trumpbox Topbox processor7162 The version is really great

 

I changed more than satellites.XML file and it is still as tricky as it is for this satellites only Eutelsat 16A

 

Edited by ahmed gazye, 1 March 2018 - 22:37.

[Persian Prince]

It isn't that easy, What's your STB model exactly?
I'm ready to add new metas if we have testers just like meta-odin and meta-octagon

I have Edision Optimuss OS2 Plus

I will add this don't worry

[Persian Prince]

It isn't that easy, What's your STB model exactly?
I'm ready to add new metas if we have testers just like meta-odin and meta-octagon

Hi Persian Prince,
I want to build openpli for KI Pro (Amlogic S905D) and KII Pro (Amlogic S905). Is there any chance to add BSP layer for those chips? There are many testers for these two STBs, who will be happy to test the builds.
Regards,
engineerkhan15

Are they like Wetek Play and Wetek Play 2?

[engineerkhan15]

Yes sir, more like Wetek Play2.

KII Pro Specs:

Chip Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0 GHz with  Mali-450MP GPU, RAM 2 GB DDR3, ROM 16 GB, DVB Tuner AVL6862 (DVB-S2, DVB-T2)

KI Pro Specs:

Chip Amlogic S905D quad core ARM Cortex-A53 @ up to 1.5 GHz with  Mali-450MP GPU, RAM 2 GB DDR4, ROM 16 GB, DVB Tuner AVL6862 (DVB-S2, DVB-C/DVB-T2)

[zeros]

New drivers for dm900/dm920 and more...

develop-dm900-02.03.2018
https://www.online.e...b0-dc1871ce879f

develop-dm920-02.03.2018
https://www.online.e...7e-ce6d918d8ab7

Happy testing!
02.03.2018
Z

[zeros]

And for dm7020hd V1

 

develop-dm7020hdV1-02.03.2018
https://www.online.e...5f-ec2d2af784ad

 

 

[lilo74]

ERROR: ExpansionError during parsing /home/######/openpli-oe-core/meta-openpli/recipes-multimedia/readymedia/readymedia.bb
Traceback (most recent call last):
  File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 412, in DataSmart.expandWithRefs(s='1.1.0+git${SRCPV}', varname='PV'):
                 try:
    >                s = __expand_var_regexp__.sub(varparse.var_sub, s)
                     try:
  File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 111, in VariableParse.var_sub(match=<_sre.SRE_Match object; span=(9, 17), match='${SRCPV}'>):
                 else:
    >                var = self.d.getVarFlag(key, "_content")
                 self.references.add(key)
  File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 794, in DataSmart.getVarFlag(var='SRCPV', flag='_content', expand=True, noweakdefault=False, parsing=False):
                     cachename = var + "[" + flag + "]"
    >            value = self.expand(value, cachename)
     
  File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 436, in DataSmart.expand(s='${@bb.fetch2.get_srcrev(d)}', varname='SRCPV'):
         def expand(self, s, varname = None):
    >        return self.expandWithRefs(s, varname).value
     
  File "/home/carlos/openpli-oe-core/bitbake/lib/bb/data_smart.py", line 426, in DataSmart.expandWithRefs(s='${@bb.fetch2.get_srcrev(d)}', varname='SRCPV'):
                 except Exception as exc:
    >                raise ExpansionError(varname, s, exc) from exc
     
bb.data_smart.ExpansionError: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/carlos/openpli-oe-core/openembedded-core/scripts:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/readymedia/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/bin/mipsel-oe-linux:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/readymedia/fetcheravoidrecurse-r0/recipe-sysroot/usr/bin/crossscripts:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/readymedia/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/sbin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/readymedia/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/bin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/readymedia/fetcheravoidrecurse-r0/recipe-sysroot-native/sbin:/home/carlos/openpli-oe-core/build/tmp/work/mips32el-oe-linux/readymedia/fetcheravoidrecurse-r0/recipe-sysroot-native/bin:/home/carlos/openpli-oe-core/bitbake/bin:/home/carlos/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/carlos"; git -c core.fsyncobjectfiles=0 ls-remote git://git.code.sf.net/p/minidlna/git  failed with exit code 128, output:
fatal: unable to connect to git.code.sf.net:
git.code.sf.net[0: 216.105.38.16]: errno=Connection timed out




Summary: There were 4 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
carlos@carlos-desktop:~/openpli-oe-core/build$
 

[WanWizard]

fatal: unable to connect to git.code.sf.net:
git.code.sf.net[0: 216.105.38.16]: errno=Connection timed out

Sourceforge is offline for the last day or so, it is becoming a right nuisance...

[Erik Slagter]

For almost a week now, intermittedly. I changed the readymedia recipe to point to a github clone and it looks that resolves this problem.

Edited by Erik Slagter, 3 March 2018 - 12:23.

[bighope]

ERROR: libcddb-1.3.2-r1 do_fetch: Fetcher failure for URL: 'http://downloads.sourceforge.net/libcddb/libcddb-1.3.2.tar.bz2'. Unable to fetch URL from any source.
ERROR: dvdbackup-0.4.2-r2 do_fetch: Fetcher failure for URL: 'http://downloads.sourceforge.net/dvdbackup/dvdbackup-0.4.2.tar.xz'. Unable to fetch URL from any source.

 

We all hate SF now -.- 

[ahmed gazye]

 

Hi thanks for testing.
However, since I have no satellite dish I've only tested the dvb-c tuner.
So you're saying you can't find any S2 channels on Eutelsat 16A?
Perhaps the satellites.XML file needs updating then?
 

 

Updated test builds for Spark7111/7162:
 
I try to make the images as close to original PLi as possible
 
- Built using pli-extras steps from the opening post
- Synced with latest (todays) PLi enigma2 develop branch
- Updated FFMPEG to 3.4.2
- Fixed screenshot feature in OpenWebIf
- Fixed GSOD in InfoBar and HotKey setup
- Fixed picon installation from Plugin Browser
- Using OE-A's pti driver for descrambling
- Synced wizard code with PLi so E2 reloads after selecting language
- Default to PLi HD skin
- Pre-installed packages: oscam, iptvplayer (+deps), exteplayer3, serviceapp and youtube
 
TODO (feature requests):
- Look into the webbrowser plugin for HbbTV
- Properly rip out OpenATV's fade-in/out infobar feature
 
Note:
* There is no feed server available (as I don't have one), so you'll have to find your third-party plugins somewhere else !
* There is no gstreamer included with my spark images as they're too slow for it, so the playback system uses libeplayer3 by default (thx to Taapat).
 
Download:
https://mega.nz/#F!q...w612u7VvgBH22tA

Thanks for this great work for Spark7111 / 7162There is a drawback to the version of the satellite. Eutelsat 16A is searched for channels s only and the channel is not searched for s2The rest of the satellites are searched for all frequencies

thanks one more time. for this great work for spark7111 / 7162 I own the Truman Trumpbox Topbox processor7162 The version is really great

 

I changed more than satellites.XML file and it is still as tricky as it is for this satellites only Eutelsat 16A

Dear friend MastaG. I have passed on your wonderful work for Spark7111 / 7162 and has been tested by thousands of friends around the world and all of them thank you very much for this work and are waiting for you to develop the version and deal with any errors. Please continue your creativity which you started, you know that the devices that are powered by Spark are almost without support Friends hope you will complete this wonderful work Good luck to you in all your actions

 

 

[Persian Prince]

I'm working on "meta-dags" (which will be ready this week) and the first test build is for "Edision Optimuss OS2 Plus" (optimussos2plus) then "force2plus".

 

"meta-wetek" will be ready next week I hope

[engineerkhan15]

Thanks a lot "Persian Prince" for your help. I will wait for "meta-wetek" to build an image for KII Pro.

[MastaG]

@ahmed gazye
Thank you, I'll make sure to build some public images every now and then.

However you'll need to be a little bit more specific on the issues you're having.

For example the problems with Eutelsat 16A.
So that sattelite give problems and all other satellites do work fine?
Is it with specific transponders (multistream perhaps?)


Try to describe your issues/problems a little bit better.

I'm using Taapat's dvb drivers with minor changes such as extended aotom procfs for the VFD on the 7162 models.
So if there's something wrong with the driver then I guess the issue should also be present in his PLi builds I guess.

[jootje]

Can you please tel me how to install on my DM920?

 

Thank you in advance!

[gassi 1950]

dreambox 800 hd v2   Can you please tel me how to install on my

[zeros]

Unzip the openpli-enigma2-homebuild-dm920_web.zip
Then flash the file as usual from web interface. Tested- the file works OK.

[ahmed gazye]

@ahmed gazye
Thank you, I'll make sure to build some public images every now and then.

However you'll need to be a little bit more specific on the issues you're having.

For example the problems with Eutelsat 16A.
So that sattelite give problems and all other satellites do work fine?
Is it with specific transponders (multistream perhaps?)


Try to describe your issues/problems a little bit better.

I'm using Taapat's dvb drivers with minor changes such as extended aotom procfs for the VFD on the 7162 models.
So if there's something wrong with the driver then I guess the issue should also be present in his PLi builds I guess.

My dear friend MastaG Thank you for your follow-up to my small problem I have found a solution is to search for each package on my own by writing all the information and search through the signal finder and then save there are some packages Stabb numbers such as the remaining 11512 and 11595 Bonn names channels and packages with channels I think it is very humble because it is  of the language of the SKIN I use the basicSKIN version hd only
My dear friend MastaG you said I'll make sure to build some public images now and then.Please allow me to do this by making it possible that you can make copies for other teams other than openpli or you are only committed to them

[lilo74]

no more OpenPLi for axas e3hd, many mistakes(fallen mirrors)etc,etc. Thanks all for you help.

[Persian Prince]

no more OpenPLi for axas e3hd, many mistakes(fallen mirrors)etc,etc. Thanks all for you help.

What's your problem exactly? Can't you compile or the compiled image won't work?