2740 replies to this topic

[Persian Prince]

Well I did remove "meta-meson" as it was complete waste of time for me at least, instead now we have "meta-amlogic".

 

First we need to provide images for wetek and odroid then we can add other amlogic devices

 

I'm testing wetekplay2 and you can test it too

Edited by Persian Prince, 3 April 2018 - 13:24.

[Persian Prince]

Also don't worry about other amlogic devices as I'm keeping the old repo here: https://github.com/p...pros/meta-meson

 

I'll add other devices when we have a successful build (On Ubuntu 16.04.4 LTS) and bootable image for wetek or odroid

[engineerkhan15]

@ Persian Prince

Thanks a lot for your help. Can't wait trying compiling an image for Wetek Play2.

[engineerkhan15]

Encountered following error while compiling for Wetek Play2 on Ubuntu 16.04 LTS:

ERROR: linux-wetek2-3.14.29-r0 do_fetch: Fetcher failure for URL: 'https://github.com/wetek-enigma/linux-amlogic/archive/amlogic-3.14.y.tar.gz'. Unable to fetch URL from any source.
ERROR: linux-wetek2-3.14.29-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/tahir/openpli-oe-core/build/tmp/work/wetekplay2-oe-linux/linux-wetek2/3.14.29-r0/temp/log.do_fetch.24410
ERROR: Task (/home/tahir/openpli-oe-core/pli-extras/meta-amlogic/recipes-bsp/linux/linux-wetek2_3.14.29.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4422 tasks of which 4150 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/tahir/openpli-oe-core/pli-extras/meta-amlogic/recipes-bsp/linux/linux-wetek2_3.14.29.bb:do_fetch
Summary: There were 5 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1

[Persian Prince]

It's a fetch error, it means you can't download the file.

[joni3333]

* New unofficial test build for Fulan sh4 (spark/spark7162)
Download: https://mega.nz/#F!v...DLHfab11t5_y5Sg
- Now built using -O2 instead of -Os, it feels a bit faster now
- Disabled zram by default as it slows down things
- Includes gstreamer 1.14 as well (thx Taapat)
- Uchardet upgraded to git version
- Merged PLi's latest enigma2 rev: 9310a05
- Built using latest openpli-oe-core rev: ab347d9
- Many cleanups and fixes
- Removed serviceapp

* Note: zram is disabled by default since we're using extra memory from video ram.
This breaks PIP, but that was limited to SD-channels anyways.
If you still want to use zram, login using telnet and issue the following commands:

touch /etc/.zram
reboot

* Note2: serviceapp has been removed in favor of Taapats service-player for libeplayer3 and gstreamer.
The playback system is set to libeplayer3 by default, which provides the same playback functionality as serviceapp + exteplayer3 as default player.
If you'd like to swtich to gstreamer 1.14, you can do this by going to: Menu -> Settings -> System -> Usage Setup (this requires a restart of enigma2)
Exteplayer3 (and now also gstplayer) is still included for use with IPTV Player

How to look the channels of power vu at this assembling?

[Abu Baniaz]

It's a fetch error, it means you can't download the file.

I have uploaded the amlogic-3.14.y.tar.gz file on link below. I'll delete the file in a week.
 
[ code]

https://mega.nz/#F!0...z7JnMUKQApeNMpw

[/code]

Edited by Abu Baniaz, 3 April 2018 - 18:05.

[Abu Baniaz]

I'll add other devices when we have a successful build (On Ubuntu 16.04.4 LTS) and bootable image for wetek or odroid

I have built the image for hardkernel-odroid c2. I don't know how to flash/transfer this image as the software I have only does .img file.

openpli-enigma2-homebuild-hardkernel-odroidc2.rootfs.tar.bz2

https://mega.nz/#!cqAlEbRI!beAywGHYAoAakRoCiqscasJpuqaqazI5nNgPj8LT1O0 

[MastaG]

* New unofficial test build for Fulan sh4 (spark/spark7162)
Download: https://mega.nz/#F!v...DLHfab11t5_y5Sg
- Now built using -O2 instead of -Os, it feels a bit faster now
- Disabled zram by default as it slows down things
- Includes gstreamer 1.14 as well (thx Taapat)
- Uchardet upgraded to git version
- Merged PLi's latest enigma2 rev: 9310a05
- Built using latest openpli-oe-core rev: ab347d9
- Many cleanups and fixes
- Removed serviceapp
* Note: zram is disabled by default since we're using extra memory from video ram.
This breaks PIP, but that was limited to SD-channels anyways.
If you still want to use zram, login using telnet and issue the following commands:

touch /etc/.zram
reboot

* Note2: serviceapp has been removed in favor of Taapats service-player for libeplayer3 and gstreamer.
The playback system is set to libeplayer3 by default, which provides the same playback functionality as serviceapp + exteplayer3 as default player.
If you'd like to swtich to gstreamer 1.14, you can do this by going to: Menu -> Settings -> System -> Usage Setup (this requires a restart of enigma2)
Exteplayer3 (and now also gstplayer) is still included for use with IPTV Player

How to look the channels of power vu at this assembling?

Unfortunately I don't have the source code for the PTI driver which supports PowerVu.
I have the one from OE-A which supports CI+ instead. But my GM Spark Triplex doesn't feature a CI+ slot so I couldn't test it.. also I think it also requires some non-public CI+ helper bits which I don't have.. but I'm not sure tbh.

[joni3333]

* New unofficial test build for Fulan sh4 (spark/spark7162)
Download: https://mega.nz/#F!v...DLHfab11t5_y5Sg
- Now built using -O2 instead of -Os, it feels a bit faster now
- Disabled zram by default as it slows down things
- Includes gstreamer 1.14 as well (thx Taapat)
- Uchardet upgraded to git version
- Merged PLi's latest enigma2 rev: 9310a05
- Built using latest openpli-oe-core rev: ab347d9
- Many cleanups and fixes
- Removed serviceapp
* Note: zram is disabled by default since we're using extra memory from video ram.
This breaks PIP, but that was limited to SD-channels anyways.
If you still want to use zram, login using telnet and issue the following commands:

touch /etc/.zram
reboot

* Note2: serviceapp has been removed in favor of Taapats service-player for libeplayer3 and gstreamer.
The playback system is set to libeplayer3 by default, which provides the same playback functionality as serviceapp + exteplayer3 as default player.
If you'd like to swtich to gstreamer 1.14, you can do this by going to: Menu -> Settings -> System -> Usage Setup (this requires a restart of enigma2)
Exteplayer3 (and now also gstplayer) is still included for use with IPTV Player

How to look the channels of power vu at this assembling?

Unfortunately I don't have the source code for the PTI driver which supports PowerVu.
I have the one from OE-A which supports CI+ instead. But my GM Spark Triplex doesn't feature a CI+ slot so I couldn't test it.. also I think it also requires some non-public CI+ helper bits which I don't have.. but I'm not sure tbh.

https://mega.nz/#F!P...7qtMJZ1RYXaJ9qw

On this assembling works! Driver took here;
https://linuxsat-sup...rivers-powervu/

[Persian Prince]

I'll add other devices when we have a successful build (On Ubuntu 16.04.4 LTS) and bootable image for wetek or odroid

I have built the image for hardkernel-odroid c2. I don't know how to flash/transfer this image as the software I have only does .img file.
openpli-enigma2-homebuild-hardkernel-odroidc2.rootfs.tar.bz2

https://mega.nz/#!cqAlEbRI!beAywGHYAoAakRoCiqscasJpuqaqazI5nNgPj8LT1O0 
 

You did compile it using meta-meson but it's meta-amlogic now with sdcard image

[starz]

 

 

I'll add other devices when we have a successful build (On Ubuntu 16.04.4 LTS) and bootable image for wetek or odroid

I have built the image for hardkernel-odroid c2. I don't know how to flash/transfer this image as the software I have only does .img file.
openpli-enigma2-homebuild-hardkernel-odroidc2.rootfs.tar.bz2

https://mega.nz/#!cqAlEbRI!beAywGHYAoAakRoCiqscasJpuqaqazI5nNgPj8LT1O0 
 

You did compile it using meta-meson but it's meta-amlogic now with sdcard image

 

Dear Persian Prince,

On this page https://github.com/P...e/odroidc2.conf

can you please change 'gst-amlavsink1 ' to 'gst-amlavsink '. other way it gives a build error with odroidc2 build.

thanks:)

[HFX]

Hi Zeros ,     When i flash what you say >   rootfs.tar.bz2  flash via web interface is then all o.k ?   i mean > tuner 2 end 2160p 60hz  and all network nas  using ?

[HFX]

i use it   now whit barry Allen but no 2160p Hz and the tunerB is not to use (no sinal on sat (dyseqc  1.2) ( i use dyseqc 1.1 on tuner A) , and the nas and al my sat receivers are not to use on my network

[HFX]

Hi Zeros, Thanks for your info (Howto Flashing)   

[Abu Baniaz]

MACHINE=hardkernel-odroidc2 make image >> meta-meson

MACHINE=odroidc2 make image >> meta-amlogic

 

I applied the change by starz. I then got this failure

NOTE: Resolving any missing task queue dependencies

ERROR: Nothing RPROVIDES 'opengl-amlogic' (but /home/openvix/openpli-oe-core/openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb RDEPENDS on or otherwise requires it)

ERROR: opengl-amlogic was skipped: incompatible with machine odroidc2 (not in COMPATIBLE_MACHINE)

NOTE: Runtime target 'opengl-amlogic' is unbuildable, removing...

Missing or unbuildable dependency chain was: ['opengl-amlogic']

NOTE: Runtime target 'packagegroup-core-boot' is unbuildable, removing...

Missing or unbuildable dependency chain was: ['packagegroup-core-boot', 'opengl-amlogic']

ERROR: Required build target 'openpli-enigma2-image' has no buildable providers.

Missing or unbuildable dependency chain was: ['openpli-enigma2-image', 'packagegroup-core-boot', 'opengl-amlogic']



Summary: There were 8 WARNING messages shown.

Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

Makefile:125: recipe for target 'image' failed

make: *** [image] Error 1

Attached Files

•  PLIMetas-odroidc2.log   6.18KB   3 downloads

[starz]

MACHINE=hardkernel-odroidc2 make image >> meta-meson
MACHINE=odroidc2 make image >> meta-amlogic

I applied the change by starz. I then got this failure

NOTE: Resolving any missing task queue dependencies

ERROR: Nothing RPROVIDES 'opengl-amlogic' (but /home/openvix/openpli-oe-core/openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb RDEPENDS on or otherwise requires it)

ERROR: opengl-amlogic was skipped: incompatible with machine odroidc2 (not in COMPATIBLE_MACHINE)

NOTE: Runtime target 'opengl-amlogic' is unbuildable, removing...

Missing or unbuildable dependency chain was: ['opengl-amlogic']

NOTE: Runtime target 'packagegroup-core-boot' is unbuildable, removing...

Missing or unbuildable dependency chain was: ['packagegroup-core-boot', 'opengl-amlogic']

ERROR: Required build target 'openpli-enigma2-image' has no buildable providers.

Missing or unbuildable dependency chain was: ['openpli-enigma2-image', 'packagegroup-core-boot', 'opengl-amlogic']



Summary: There were 8 WARNING messages shown.

Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

Makefile:125: recipe for target 'image' failed

make: *** [image] Error 1

On this page or your local file https://github.com/P...amlogic_r4p1.bb
Change line:
COMPATIBLE_MACHINE = "(wetekplay|wetekplay2)"
to COMPATIBLE_MACHINE = "(odroidc2|wetekplay2)"
or COMPATIBLE_MACHINE = "(wetekplay|wetekplay2|odroidc2)" and try again please.

Edited by starz, 4 April 2018 - 05:16.

[Persian Prince]

Please wait as I'm still working on meta-amlogic and it's not ready yet, as I said I'm testing wetekplay2 currenlty but "libaacs" gives me git error and I can't build anymore

[Beeker]

i use it   now whit barry Allen but no 2160p Hz

 

You need latest drivers (20180323) to fix that. All images dm900/dm920 at forum has old drivers, but with proper opkg files you can update to latest.

[MastaG]

@joni3333

Yes, I'm using Tapaat's driver as well and I have merged joeuser's public bits:

https://github.com/P.../commits/master

 

So I've added the cases for CA_SET_DESCR_MODE and CA_SET_DESCR_DATA.

And I've added the pti hal dummy functions for pti_hal_descrambler_set_aes and pti_hal_descrambler_set_mode.

 

But these are only dummy funcions and don't support descrambling of channels.

 

For this I need the non-public sources for pti_np which supports DES encryption for PowerVu.

And I don't have these.

 

Instead I have the pti_np from OE-Alliance which doesn't support DES (PowerVu) but CI+ instead.

So that one does feature pti_hal_descrambler_set_aes for CI+, but it has pti_hal_descrambler_set_mode stubbed out.

 

So get me the pti_np sources for PowerVu and I'll build a new image for you