2740 replies to this topic

[engineerkhan15]

I tried to to place dvb drivers in that image from same. But it did not work.

Probably, it is not just copying these drivers to the kernel path but changes in many files are required.

[frankviana]

Compiled raspberrypi3 without error, only warnings, but where I find the .img file to burn sdcard? Sorry, but this is my first work...

 

 rasp3.txt   30.86KB   10 downloads

[zeros]

Should be on /openpli-oe-core/build/tmp/deploy/images

[frankviana]

azbox hd error:

 

Initialising tasks: 100% |######################################################################################################| Time: 0:01:28
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: linux-azbox-3.9.2-r0 do_fetch: Failed to fetch URL http://source.mynonp...-initrd-azboxhd, attempting MIRRORS if available
ERROR: linux-azbox-3.9.2-r0 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/frank/openpli-oe-core/openembedded-core/scripts:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/bin/mipsel-oe-linux:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot/usr/bin/crossscripts:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/sbin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/bin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/sbin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/bin:/home/frank/openpli-oe-core/bitbake/bin:/home/frank/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/frank"; /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/frank/openpli-oe-core/sources 'http://source.mynonp...6092013.tar.bz2' --progress=dot -v failed with exit code 8, output:
--2018-05-12 11:10:47--  http://source.mynonp...6092013.tar.bz2
Resolving source.mynonpublic.com (source.mynonpublic.com)... 37.187.109.154
Connecting to source.mynonpublic.com (source.mynonpublic.com)|37.187.109.154|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2018-05-12 11:10:48 ERROR 404: Not Found.


ERROR: linux-azbox-3.9.2-r0 do_fetch: Fetcher failure for URL: 'http://source.mynonp...-initrd-azboxhd'. Unable to fetch URL from any source.
ERROR: linux-azbox-3.9.2-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/temp/log.do_fetch.23050
ERROR: Task (/home/frank/openpli-oe-core/pli-extras/meta-azbox/recipes-bsp/linux/linux-azbox_3.9.2.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1357 tasks of which 1048 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/frank/openpli-oe-core/pli-extras/meta-azbox/recipes-bsp/linux/linux-azbox_3.9.2.bb:do_fetch
Summary: There were 5 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
frank@Frank:~/openpli-oe-core$

[frankviana]

Should be on /openpli-oe-core/build/tmp/deploy/images

 

openpli-enigma2-homebuild-raspberrypi3.rootfs.rpi-sdimg (415,2 MB) - Rename to .img?

openpli-enigma2-homebuild-raspberrypi3.rootfs.ext3 (369,1 MB)

openpli-enigma2-homebuild-raspberrypi3.rootfs.tar.bz2 (82,7 MB)

 

Thank you.

[zeros]

No, I think, you can use for flash openpli-enigma2-homebuild-raspberrypi3.rootfs.tar.bz2

Or the same openpli-enigma2-homebuild-raspberrypi3.rootfs.rpi-sdimg (don't rename it)

Edited by zeros, 12 May 2018 - 16:50.

[Persian Prince]

Yes rename .rpi-sdimg to img and use it

[thmls]

Last night, I tried Enigma2 image of other team build for Amiko Alien 5 on my KI Pro (both have same chip, S905D).

Here are my test results:

The box booted well through SD card without doing any modification (adding or replacing anything extra on the SD card).

KI Pro remote did not work.

But I was able to go through initial setup by using wireless keyboard.

After setup, I was able to access OpenWebIF and use remote control in it.

I was also able to access filesystem by using FTP (DCC) on LAN connection.

Tuner used in the Alien 5 is different, so there were no drivers for KI Pro tuner Avl6862 in this Enigma2.

I tried to add the tuner driver (ko) files to the path "/lib/modules/3.14.29/kernel/drivers" but it did not work.

Any suggestions, for adding drivers for tuner in this image?

what is the pass??  for connection ftp

[engineerkhan15]

user: root

pass: pure2

[thmls]

user: root
pass: pure2

I try this ftp not connected
Only telnet

With control of wepif I went to the menu. settings tried to activate ftp with no luck

Στάλθηκε από το SM-A510F μου χρησιμοποιώντας Tapatalk

[ftp21_]

Are these the K1 pro tuner driver?
https://github.com/kszaq/dvb_tv-aml

[frankviana]

azbox hd error:

 

Initialising tasks: 100% |######################################################################################################| Time: 0:01:28
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: linux-azbox-3.9.2-r0 do_fetch: Failed to fetch URL http://source.mynonp...-initrd-azboxhd, attempting MIRRORS if available
ERROR: linux-azbox-3.9.2-r0 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/frank/openpli-oe-core/openembedded-core/scripts:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/bin/mipsel-oe-linux:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot/usr/bin/crossscripts:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/sbin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/bin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/sbin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/bin:/home/frank/openpli-oe-core/bitbake/bin:/home/frank/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/frank"; /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/frank/openpli-oe-core/sources 'http://source.mynonp...6092013.tar.bz2' --progress=dot -v failed with exit code 8, output:
--2018-05-12 11:10:47--  http://source.mynonp...6092013.tar.bz2
Resolving source.mynonpublic.com (source.mynonpublic.com)... 37.187.109.154
Connecting to source.mynonpublic.com (source.mynonpublic.com)|37.187.109.154|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2018-05-12 11:10:48 ERROR 404: Not Found.


ERROR: linux-azbox-3.9.2-r0 do_fetch: Fetcher failure for URL: 'http://source.mynonp...-initrd-azboxhd'. Unable to fetch URL from any source.
ERROR: linux-azbox-3.9.2-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/temp/log.do_fetch.23050
ERROR: Task (/home/frank/openpli-oe-core/pli-extras/meta-azbox/recipes-bsp/linux/linux-azbox_3.9.2.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1357 tasks of which 1048 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/frank/openpli-oe-core/pli-extras/meta-azbox/recipes-bsp/linux/linux-azbox_3.9.2.bb:do_fetch
Summary: There were 5 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
frank@Frank:~/openpli-oe-core$

 

Persian Prince, please fix kernel azbox.

[ftp21_]

Here is the new link:

 

I copy this remote.conf from libreelec thread and remote now work (but need some button remaps)

#amlogic NEC remote
factory_code	= 0xff000001   #video striong
work_mode  		= 0
repeat_enable = 1
repeat_delay = 200
repeat_peroid = 39
release_delay	=	121
debug_enable 	= 1

fn_key_scancode    = 0x99
left_key_scancode  = 0x5a
right_key_scancode = 0x1b
up_key_scancode    = 0x06
down_key_scancode  = 0x16
ok_key_scancode    = 0x1a
pageup_key_scancode = 0x55
pagedown_key_scancode = 0x15

key_begin

0x59 116 #power
0x19 113 #mute

#0x4d 18 #epg
#0x0e 23 #info
0x0d 172 #home

0x51 14 #del
0x12 24 #mouse
0x11 34 #dtv

0x45 46 #menu
0x05 1 #exit

0x06 103 #up
0x5a 105 #left
0x1a 28 #enter
0x1b 106 #right
0x16 108 #down

0x55 177 #104 	#page+
0x15 178 #109 	#page-

0x52 2 #1
0x50 3 #2
0x10 4 #3
0x13 115	#vol+

0x56 5 #4
0x54 6 #5
0x14 7 #6
0x17 114 	#vol-

0x4e 8 #7 
0x4c 9 #8
0x0c 10 #9
0x0f 11 #0

0x4a 168	#fr
0x48 208 	#ff
0x08 165 	#prev
0x0b 163 	#next

0x46 57 #play/pause
0x44 45 #stop
0x04 37 #pvr, tv/radio
0x07 132 #repeat

0x42 398 #59 #red
0x40 399 #60 #green
0x00 400 #61 #yellow
0x03 401 #62 #blue

0x1f 364 #fav
0x4d 365 #EPG
0x58 79 #app
0x18 65 #browser

#0x0e 136 #audio
0x09 38 #20 #next subtitle

0x02 23 #info
0x01 27 #audio
key_end

[takitr]

Kodi start stop ok. Kodi 17 ok
that's based wetek-meta. Good works

[starz]

tried a5 image but nothing boots with k1 plus.

[engineerkhan15]

Are these the K1 pro tuner driver?
https://github.com/kszaq/dvb_tv-aml

Yes, I think so. But these have to be compiled first. There are compiled drivers available as mentioned in post #666.

 

Please tell the complete path of folder where you copied the remote.conf.

Edited by engineerkhan15, 13 May 2018 - 03:34.

[engineerkhan15]

 

user: root
pass: pure2

I try this ftp not connected
Only telnet

With control of wepif I went to the menu. settings tried to activate ftp with no luck

Στάλθηκε από το SM-A510F μου χρησιμοποιώντας Tapatalk

 

I used DCC 2.95 and it worked.

[takitr]

Last puplic dvb driver avl6862
https://github.com/C...amlogic/dvb-avl

[engineerkhan15]

@takitr

Can you find a way to add these drivers to the Enigma2 for Alien 5?

or

Is there any chance to get guidance from this image to prepare a meta for KI Pro?

[ftp21_]

 
Please tell the complete path of folder where you copied the remote.conf.

You can overwrite remote.conf in /etc/amremote