This topic is lockedIt was my fault, as I had on my fullbackup *.py file, what was recently changed. (UsageConfig.py)
Howto build unofficial pli for your unsupported receiver
Started by Persian Prince, 30 Jan 2018 09:10
2740 replies to this topic
Re: Howto build unofficial pli for your unsupported receiver #1161
-
- PLi® Contributor
- 1,635 posts
+61
Good
Posted 29 May 2018 - 19:33
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Re: Howto build unofficial pli for your unsupported receiver #1162
-
- Senior Member
- 77 posts
+24
Neutral
Posted 29 May 2018 - 20:02
Alien5 openatv latest img
https://yadi.sk/d/t0_J-V533WfuNr
Persianpros you have to editting alien5 dts for k1 pro. Compare this dvb part and gpio number
https://github.com/C...p230_k1_pro.dts
https://yadi.sk/d/t0_J-V533WfuNr
Persianpros you have to editting alien5 dts for k1 pro. Compare this dvb part and gpio number
https://github.com/C...p230_k1_pro.dts
Re: Howto build unofficial pli for your unsupported receiver #1163
-
- Senior Member
- 77 posts
+24
Neutral
Posted 29 May 2018 - 20:03
Alien5 openatv latest img
https://yadi.sk/d/t0_J-V533WfuNr
Persianpros you have to editting alien5 dts for k1 pro. Compare this dvb part and gpio number
https://github.com/C...p230_k1_pro.dts
https://yadi.sk/d/t0_J-V533WfuNr
Persianpros you have to editting alien5 dts for k1 pro. Compare this dvb part and gpio number
https://github.com/C...p230_k1_pro.dts
Re: Howto build unofficial pli for your unsupported receiver #1164
-
- Senior Member
- 1,531 posts
+118
Excellent
Posted 29 May 2018 - 22:18
This thread got way out of hand, far beyond what we can support.
But at least it gets everyone into self building and looking into build issues 
Re: Howto build unofficial pli for your unsupported receiver #1165
-
- Member
- 5 posts
0
Neutral
Posted 29 May 2018 - 23:03
Where to buy Alien 5?
Re: Howto build unofficial pli for your unsupported receiver #1166
-
- Senior Member
- 151 posts
0
Neutral
Posted 30 May 2018 - 00:58
Where to buy Alien 5?
good evening he is not yet on sale.
Re: Howto build unofficial pli for your unsupported receiver #1167
-
- Senior Member
- 1,982 posts
+247
Excellent
Posted 30 May 2018 - 07:20
K1 pro remote work with openatv but İ remap add manuel remote code. When it is over I will share remote config.
I did add some new remotes: https://github.com/PLi-metas/amremote
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #1168
-
- Senior Member
- 57 posts
+3
Neutral
Posted 30 May 2018 - 07:24
you can become a little clearer how to editting alien5 dts for ki pro?Alien5 openatv latest img
https://yadi.sk/d/t0_J-V533WfuNr
Persianpros you have to editting alien5 dts for k1 pro. Compare this dvb part and gpio number
https://github.com/C...p230_k1_pro.dts
is file?
what is the route?
Re: Howto build unofficial pli for your unsupported receiver #1169
-
- Senior Member
- 1,982 posts
+247
Excellent
Posted 30 May 2018 - 08:16
I'm testing k1pro build now but it's not ready yet so don't start builing now, just wait for my light
https://github.com/P...commits/develop
Edited by Persian Prince, 30 May 2018 - 08:16.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #1170
-
- Senior Member
- 1,982 posts
+247
Excellent
Posted 30 May 2018 - 08:23
you can become a little clearer how to editting alien5 dts for ki pro?Alien5 openatv latest img
https://yadi.sk/d/t0_J-V533WfuNr
Persianpros you have to editting alien5 dts for k1 pro. Compare this dvb part and gpio number
https://github.com/C...p230_k1_pro.dts
is file?
what is the route?
No need as it's here: https://github.com/P...14.29/k1pro.dts
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #1171
-
- Senior Member
- 73 posts
+9
Neutral
Posted 30 May 2018 - 08:35
I'm testing k1pro build now but it's not ready yet so don't start builing now, just wait for my light
You have cheered up my day I'm waiting for your light
Re: Howto build unofficial pli for your unsupported receiver #1172
-
- Senior Member
- 77 posts
+24
Neutral
Posted 30 May 2018 - 10:03
k1 pro remote like wetekplay enigma2 remote (key code and scan code compatiple k1 pro)
https://github.com/o...es/wetek/rc.png
https://github.com/o...es/wetek/rc.png
Re: Howto build unofficial pli for your unsupported receiver #1173
-
- Senior Member
- 474 posts
+4
Neutral
Posted 30 May 2018 - 15:39
I'm testing k1pro build now but it's not ready yet so don't start builing now, just wait for my light
A lot of people waiting for this... thank you.
Ready to test when available.
Maybe later... later too: new and old k1 plus (s905/s905d), new and old k2 pro (s905/s905d) and k3 (s912) - I don't know exactly, but same remote, tuner, audio, network: wifi, bluetooth, etc..
Edited by frankviana, 30 May 2018 - 15:43.
Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter, PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)
Re: Howto build unofficial pli for your unsupported receiver #1174
-
- Senior Member
- 77 posts
+24
Neutral
Posted 30 May 2018 - 16:06
Re: Howto build unofficial pli for your unsupported receiver #1175
-
- Member
- 10 posts
0
Neutral
Posted 30 May 2018 - 17:21
kodi is not there
Re: Howto build unofficial pli for your unsupported receiver #1176
-
- Member
- 10 posts
0
Neutral
Posted 30 May 2018 - 17:28
Random reboot, no audio,
Re: Howto build unofficial pli for your unsupported receiver #1177
-
- Senior Member
- 57 posts
+3
Neutral
Posted 30 May 2018 - 17:31
I parameterized the file remote.conf vitmod and now all orders are working. (menus and colored buttons work on all commands)
tested openatv alien 5 on ki pro
remote.conf
#amlogic NEC remote
factory_code = 0xff000001 #video striong
work_mode = 0
repeat_enable = 1
repeat_delay = 200
repeat_peroid = 39
release_delay = 121
debug_enable = 1
fn_key_scancode = 0x99
left_key_scancode = 0x5a
right_key_scancode = 0x1b
up_key_scancode = 0x06
down_key_scancode = 0x16
ok_key_scancode = 0x1a
pageup_key_scancode = 0x55
pagedown_key_scancode = 0x15
key_begin
0x59 116 #power
0x19 113 #mute
0x4d 18 #epg
0x0e 23 #info
0x0d 172 #home
0x51 14 #del
0x12 90 #mouse
0x11 34 #dtv
0x45 139 #menu
0x05 1 #exit
0x06 103 #up
0x5a 105 #left
0x1a 28 #enter
0x1b 106 #right
0x16 108 #down
0x55 104 #page+
0x15 109 #page-
0x52 2 #1
0x50 3 #2
0x10 4 #3
0x13 115 #vol+
0x56 5 #4
0x54 6 #5
0x14 7 #6
0x17 114 #vol-
0x4e 8 #7
0x4c 9 #8
0x0c 10 #9
0x0f 11 #0
0x4a 19 #fr
0x48 33 #ff
0x08 52 #prev
0x0b 52 #next
0x46 119 #play/pause
0x44 128 #stop
0x04 167 #pvr, tv/radio
0x07 132 #repeat
0x42 398 #red
0x40 399 #green
0x00 400 #yellow
0x03 401 #blue
0x1f 63 #fav
0x58 64 #app
0x18 65 #browser
0x0e 136 #audio
0x09 20 #subtitle, recall
0x02 23 #info
0x01 27 #audio
key_end
Re: Howto build unofficial pli for your unsupported receiver #1178
-
- Senior Member
- 474 posts
+4
Neutral
Posted 30 May 2018 - 20:29
I parameterized the file remote.conf vitmod and now all orders are working. (menus and colored buttons work on all commands)
tested openatv alien 5 on ki pro
remote.conf
#amlogic NEC remote
factory_code = 0xff000001 #video striong
work_mode = 0
repeat_enable = 1
repeat_delay = 200
repeat_peroid = 39
release_delay = 121
debug_enable = 1
fn_key_scancode = 0x99
left_key_scancode = 0x5a
right_key_scancode = 0x1b
up_key_scancode = 0x06
down_key_scancode = 0x16
ok_key_scancode = 0x1a
pageup_key_scancode = 0x55
pagedown_key_scancode = 0x15
key_begin
0x59 116 #power
0x19 113 #mute
0x4d 18 #epg
0x0e 23 #info
0x0d 172 #home
0x51 14 #del
0x12 90 #mouse
0x11 34 #dtv
0x45 139 #menu
0x05 1 #exit
0x06 103 #up
0x5a 105 #left
0x1a 28 #enter
0x1b 106 #right
0x16 108 #down
0x55 104 #page+
0x15 109 #page-
0x52 2 #1
0x50 3 #2
0x10 4 #3
0x13 115 #vol+
0x56 5 #4
0x54 6 #5
0x14 7 #6
0x17 114 #vol-
0x4e 8 #7
0x4c 9 #8
0x0c 10 #9
0x0f 11 #0
0x4a 19 #fr
0x48 33 #ff
0x08 52 #prev
0x0b 52 #next
0x46 119 #play/pause
0x44 128 #stop
0x04 167 #pvr, tv/radio
0x07 132 #repeat
0x42 398 #red
0x40 399 #green
0x00 400 #yellow
0x03 401 #blue
0x1f 63 #fav
0x58 64 #app
0x18 65 #browser
0x0e 136 #audio
0x09 20 #subtitle, recall
0x02 23 #info
0x01 27 #audio
key_end
Yes... working fine using my K1 pro and OpenATV (alien5). All keys OK (/etc/amremote/remote.conf)
Now, only audio and tuner need fix.
thanks a lot. 
Edited by frankviana, 30 May 2018 - 20:32.
Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter, PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)
Re: Howto build unofficial pli for your unsupported receiver #1179
-
- Senior Member
- 77 posts
+24
Neutral
Posted 30 May 2018 - 21:44
Kodi audio ok but enigma2 need i2s correct gpio thus we should be add dts like aLiens dts för k1pro
pinmux {
audio_pins:audio_pin{
amlogic,setmask=<6 0x7800000>;
amlogic,clrmask=<6 0x07e0000>;
amlogic,pins = "GPIOH_6","GPIOH_7","GPIOH_8","GPIOH_9";
/*
amlogic,setmask=<6 0x7800000
3 0x38000000>;
amlogic,clrmask=<6 0x07e0000
3 0x19800
4 0x1c0000
AO 0x50000>;//for 4 i2s in interface
amlogic,pins = "GPIOH_6","GPIOH_7","GPIOH_8","GPIOH_9", "GPIOAO_6", "GPIOZ_2", "GPIOZ_3","GPIOZ_4";
*/
};
audio_spdif_pins:audio_pin1{
amlogic,setmask=<6 0x10000000>; /*spdif_out*/
amlogic,clrmask=<6 0x8000000>;
amlogic,pins ="GPIOH_4"; /*spdif_out*/
};
audio_btpcm_pins:audio_btpcm_pins{
/* BT PCM PINMUX SETTING*/
amlogic,setmask=<5 0xf00000>;
amlogic,clrmask=<5 0x3c33>;
amlogic,pins ="GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11";
};
aml_dmic:audio_dmic{
amlogic,setmask=<2 0xc0>;
amlogic,clrmask=<1 0x60c000
2 0x18000
3 0x18>;
amlogic,pins = "GPIODV_24","GPIODV_25";
};
pinmux {
audio_pins:audio_pin{
amlogic,setmask=<6 0x7800000>;
amlogic,clrmask=<6 0x07e0000>;
amlogic,pins = "GPIOH_6","GPIOH_7","GPIOH_8","GPIOH_9";
/*
amlogic,setmask=<6 0x7800000
3 0x38000000>;
amlogic,clrmask=<6 0x07e0000
3 0x19800
4 0x1c0000
AO 0x50000>;//for 4 i2s in interface
amlogic,pins = "GPIOH_6","GPIOH_7","GPIOH_8","GPIOH_9", "GPIOAO_6", "GPIOZ_2", "GPIOZ_3","GPIOZ_4";
*/
};
audio_spdif_pins:audio_pin1{
amlogic,setmask=<6 0x10000000>; /*spdif_out*/
amlogic,clrmask=<6 0x8000000>;
amlogic,pins ="GPIOH_4"; /*spdif_out*/
};
audio_btpcm_pins:audio_btpcm_pins{
/* BT PCM PINMUX SETTING*/
amlogic,setmask=<5 0xf00000>;
amlogic,clrmask=<5 0x3c33>;
amlogic,pins ="GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11";
};
aml_dmic:audio_dmic{
amlogic,setmask=<2 0xc0>;
amlogic,clrmask=<1 0x60c000
2 0x18000
3 0x18>;
amlogic,pins = "GPIODV_24","GPIODV_25";
};
Re: Howto build unofficial pli for your unsupported receiver #1180
-
- Senior Member
- 1,982 posts
+247
Excellent
Posted 31 May 2018 - 02:48
When k1pro build compiles fine we can add the rest too don't worry.I'm testing k1pro build now but it's not ready yet so don't start builing now, just wait for my light
https://github.com/P...commits/develop
A lot of people waiting for this... thank you.
Ready to test when available.
Maybe later... later too: new and old k1 plus (s905/s905d), new and old k2 pro (s905/s905d) and k3 (s912) - I don't know exactly, but same remote, tuner, audio, network: wifi, bluetooth, etc..
remote is ok, dts file is ok, I just need to make kernel ok with avl patch ... after that everything will be automatic
Edited by Persian Prince, 31 May 2018 - 02:50.
Open Vision sources: https://github.com/OpenVisionE2
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
