Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #1381 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 22 June 2018 - 19:15

 

sudo apt-get install autoconf automake bison bzip2 cvs diffstat flex g++ gawk gcc gettext git gzip help2man ncurses-bin libncurses5-dev libc6-dev libtool make texinfo patch perl pkg-config subversion tar texi2html wget chrpath libxml2-utils xsltproc python-setuptools libc6 genromfs mtd-utils dpkg-dev sshpass poedit translate-toolkit xclip linux-firmware linux-headers-uname -r linux-headers-generic linux-image-generic linux-libc-dev linux-source u-boot-tools upx-ucl doxygen repo optipng python-dev libglib2.0-dev pngquant default-jdk


E: Command line option 'r' [from -r] is not understood in combination with the other options.

Take a deep look: https://github.com/P...-1804-lts-setup

It's "linux-headers-`uname -r`".

 

 

Yes. I did the exclusion, but I don't know if show me problem in future...

 

I thought that might be the problem when compiling for k1pro, but later you tell about kernel...

 

What's this for the compilation: linux-headers-`uname -r`?


Edited by frankviana, 22 June 2018 - 19:18.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1382 starz

  • Senior Member
  • 59 posts

+1
Neutral

Posted 22 June 2018 - 19:56

Can you help me why do I get this error both on spark-7111 and wetekplay2 building?

DEBUG: Executing shell function do_compile
NOTE: make -j 4 LD=ld  AR=ar OBJCOPY=objcopy LDFLAGS=-L/home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/recipe-sysroot-native/usr/lib -L/home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/recipe-sysroot-native/lib -Wl,-rpath,/home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/recipe-sysroot-native/lib -Wl,-O1 -fuse-ld=bfd
  GEN     arm-linux-user/config-devices.mak.tmp
  GEN     aarch64-linux-user/config-devices.mak.tmp
  GEN     aarch64-softmmu/config-devices.mak.tmp
  GEN     arm-softmmu/config-devices.mak.tmp
  GEN     arm-linux-user/config-devices.mak
  GEN     aarch64-linux-user/config-devices.mak
  GEN     i386-linux-user/config-devices.mak.tmp
  GEN     i386-softmmu/config-devices.mak.tmp
  GEN     arm-softmmu/config-devices.mak
  GEN     i386-linux-user/config-devices.mak
  GEN     aarch64-softmmu/config-devices.mak
  GEN     mips-softmmu/config-devices.mak.tmp
  GEN     mipsel-linux-user/config-devices.mak.tmp
  GEN     mips-linux-user/config-devices.mak.tmp
  GEN     mips-linux-user/config-devices.mak
  GEN     mipsel-linux-user/config-devices.mak
  GEN     i386-softmmu/config-devices.mak
  GEN     mips64-linux-user/config-devices.mak.tmp
  GEN     mipsel-softmmu/config-devices.mak.tmp
  GEN     mips64-softmmu/config-devices.mak.tmp
  GEN     mips-softmmu/config-devices.mak
  GEN     mips64-linux-user/config-devices.mak
  GEN     mips64el-linux-user/config-devices.mak.tmp
  GEN     mips64el-softmmu/config-devices.mak.tmp
  GEN     mips64-softmmu/config-devices.mak
  GEN     mipsel-softmmu/config-devices.mak
  GEN     ppc-linux-user/config-devices.mak.tmp
  GEN     ppc-softmmu/config-devices.mak.tmp
  GEN     ppc-linux-user/config-devices.mak
  GEN     mips64el-softmmu/config-devices.mak
  GEN     sh4-linux-user/config-devices.mak.tmp
  GEN     sh4-softmmu/config-devices.mak.tmp
  GEN     ppc-softmmu/config-devices.mak
  GEN     sh4-linux-user/config-devices.mak
  GEN     x86_64-linux-user/config-devices.mak.tmp
  GEN     x86_64-softmmu/config-devices.mak.tmp
  GEN     sh4-softmmu/config-devices.mak
  GEN     x86_64-linux-user/config-devices.mak
  GEN     config-host.h
  GEN     qemu-options.def
  GEN     x86_64-softmmu/config-devices.mak
  GEN     qmp-commands.h
  GEN     qapi-types.h
  GEN     qapi-visit.h
  GEN     qapi-event.h
  GEN     qmp-introspect.h
  GEN     mips64el-linux-user/config-devices.mak
  GEN     module_block.h
  GEN     tests/test-qapi-types.h
  GEN     tests/test-qapi-visit.h
  GEN     tests/test-qmp-commands.h
  GEN     tests/test-qapi-event.h
  GEN     tests/test-qmp-introspect.h
  GEN     config-all-devices.mak
  GEN     trace/generated-tracers.h
  GEN     trace/generated-tcg-tracers.h
  GEN     trace/generated-helpers-wrappers.h
  GEN     trace/generated-helpers.h
  CC      tests/qemu-iotests/socket_scm_helper.o
  GEN     qemu-options.texi
  GEN     qemu-img-cmds.texi
  GEN     qemu-monitor.texi
  GEN     qemu-monitor-info.texi
  GEN     qemu-img.1
  GEN     qemu-nbd.8
  GEN     qemu-ga.8
  GEN     qga/qapi-generated/qga-qapi-types.h
  GEN     qga/qapi-generated/qga-qapi-visit.h
  GEN     qga/qapi-generated/qga-qapi-types.c
  GEN     qga/qapi-generated/qga-qmp-commands.h
  GEN     qga/qapi-generated/qga-qapi-visit.c
  GEN     qga/qapi-generated/qga-qmp-marshal.c
  GEN     qmp-introspect.c
  GEN     qapi-types.c
  GEN     qapi-visit.c
  GEN     qapi-event.c
  CC      qapi/qapi-visit-core.o
  CC      qapi/qapi-dealloc-visitor.o
  CC      qapi/qobject-input-visitor.o
  CC      qapi/qobject-output-visitor.o
  CC      qapi/qmp-registry.o
  CC      qapi/qmp-dispatch.o
  CC      qapi/string-input-visitor.o
  CC      qapi/string-output-visitor.o
  CC      qapi/opts-visitor.o
  CC      qapi/qapi-clone-visitor.o
  CC      qapi/qmp-event.o
  CC      qapi/qapi-util.o
  CC      qobject/qnull.o
  CC      qobject/qint.o
  CC      qobject/qstring.o
  CC      qobject/qdict.o
  CC      qobject/qlist.o
  CC      qobject/qfloat.o
  CC      qobject/qbool.o
  CC      qobject/qjson.o
  CC      qobject/qobject.o
  CC      qobject/json-lexer.o
  CC      qobject/json-streamer.o
  CC      qobject/json-parser.o
  GEN     trace/generated-tracers.c
  CC      trace/control.o
  CC      trace/qmp.o
  CC      util/osdep.o
  CC      util/cutils.o
  CC      util/unicode.o
  CC      util/qemu-timer-common.o
  CC      util/bufferiszero.o
  CC      util/compatfd.o
  CC      util/event_notifier-posix.o
  CC      util/mmap-alloc.o
  CC      util/oslib-posix.o
  CC      util/qemu-openpty.o
  CC      util/qemu-thread-posix.o
  CC      util/memfd.o
  CC      util/envlist.o
  CC      util/path.o
  CC      util/module.o
  CC      util/host-utils.o
  CC      util/bitmap.o
  CC      util/bitops.o
  CC      util/hbitmap.o
  CC      util/fifo8.o
  CC      util/acl.o
  CC      util/error.o
  CC      util/qemu-error.o
  CC      util/id.o
  CC      util/iov.o
  CC      util/qemu-config.o
  CC      util/qemu-sockets.o
  CC      util/uri.o
  CC      util/notify.o
  CC      util/qemu-option.o
  CC      util/qemu-progress.o
  CC      util/hexdump.o
  CC      util/crc32c.o
  CC      util/uuid.o
  CC      util/throttle.o
  CC      util/getauxval.o
  CC      util/readline.o
  CC      util/rcu.o
  CC      util/qemu-coroutine.o
  CC      util/qemu-coroutine-lock.o
  CC      util/qemu-coroutine-io.o
  CC      util/qemu-coroutine-sleep.o
  CC      util/coroutine-ucontext.o
  CC      util/buffer.o
  CC      util/timed-average.o
  CC      util/base64.o
  CC      util/log.o
  CC      util/qdist.o
  CC      util/qht.o
  CC      util/range.o
  CC      crypto/pbkdf-stub.o
  CC      stubs/arch-query-cpu-def.o
  CC      stubs/arch-query-cpu-model-expansion.o
  CC      stubs/arch-query-cpu-model-comparison.o
  CC      stubs/arch-query-cpu-model-baseline.o
  CC      stubs/bdrv-next-monitor-owned.o
  CC      stubs/blk-commit-all.o
  CC      stubs/blockdev-close-all-bdrv-states.o
  CC      stubs/clock-warp.o
  CC      stubs/cpu-get-clock.o
  CC      stubs/cpu-get-icount.o
  CC      stubs/dump.o
  CC      stubs/error-printf.o
  CC      stubs/fdset-add-fd.o
  CC      stubs/fdset-find-fd.o
  CC      stubs/fdset-get-fd.o
  CC      stubs/fdset-remove-fd.o
  CC      stubs/gdbstub.o
  CC      stubs/get-fd.o
  CC      stubs/get-next-serial.o
  CC      stubs/get-vm-name.o
  CC      stubs/iothread.o
  CC      stubs/iothread-lock.o
  CC      stubs/is-daemonized.o
  CC      stubs/machine-init-done.o
  CC      stubs/migr-blocker.o
  CC      stubs/mon-is-qmp.o
  CC      stubs/monitor-init.o
  CC      stubs/notify-event.o
  CC      stubs/qtest.o
  CC      stubs/replay.o
  CC      stubs/replay-user.o
  CC      stubs/reset.o
  CC      stubs/runstate-check.o
  CC      stubs/set-fd-handler.o
  CC      stubs/slirp.o
  CC      stubs/sysbus.o
  CC      stubs/trace-control.o
  CC      stubs/uuid.o
  CC      stubs/vm-stop.o
  CC      stubs/vmstate.o
  CC      stubs/cpus.o
  CC      stubs/qmp_pc_dimm_device_list.o
  CC      stubs/kvm.o
  CC      stubs/target-monitor-defs.o
  CC      stubs/target-get-monitor-def.o
  CC      stubs/vhost.o
  CC      stubs/iohandler.o
  CC      stubs/smbios_type_38.o
  CC      stubs/ipmi.o
  CC      stubs/pc_madt_cpu_entry.o
  CC      stubs/migration-colo.o
  CC      contrib/ivshmem-client/ivshmem-client.o
  CC      contrib/ivshmem-client/main.o
  CC      contrib/ivshmem-server/ivshmem-server.o
  CC      contrib/ivshmem-server/main.o
  CC      qemu-nbd.o
  CC      async.o
  CC      thread-pool.o
  CC      block.o
  CC      blockjob.o
  CC      main-loop.o
  CC      iohandler.o
  CC      qemu-timer.o
  CC      aio-posix.o
  CC      qemu-io-cmds.o
  CC      replication.o
  CC      block/raw_bsd.o
  CC      block/qcow.o
  CC      block/vdi.o
  CC      block/vmdk.o
  CC      block/cloop.o
  CC      block/bochs.o
  CC      block/vpc.o
  CC      block/vvfat.o
  CC      block/dmg.o
  CC      block/qcow2.o
  CC      block/qcow2-refcount.o
  CC      block/qcow2-cluster.o
  CC      block/qcow2-snapshot.o
  CC      block/qcow2-cache.o
  CC      block/qed.o
  CC      block/qed-gencb.o
  CC      block/qed-l2-cache.o
  CC      block/qed-table.o
  CC      block/qed-cluster.o
  CC      block/qed-check.o
  CC      block/vhdx.o
  CC      block/vhdx-endian.o
  CC      block/vhdx-log.o
  CC      block/quorum.o
  CC      block/parallels.o
  CC      block/blkdebug.o
  CC      block/blkverify.o
  CC      block/blkreplay.o
  CC      block/block-backend.o
  CC      block/snapshot.o
  CC      block/qapi.o
  CC      block/raw-posix.o
  CC      block/null.o
  CC      block/mirror.o
  CC      block/commit.o
/home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/qemu-2.8.0/block/raw-posix.c:63:21: fatal error: scsi/sg.h: No such file or directory
ERROR: oe_runmake failed
compilation terminated.
/home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/qemu-2.8.0/rules.mak:60: recipe for target 'block/raw-posix.o' failed
make: *** [block/raw-posix.o] Error 1
make: *** Waiting for unfinished jobs....
ERROR: Function failed: do_compile (log file is located at /home/starz/openpli-oe-core/build/tmp/work/i686-linux/qemu-native/2.8.0-r0/temp/log.do_compile.4794)

Compile a mipsel image first like "azboxhd" then compile for arm, it's a trick :D

Thanks for the trick,I'll try it:D

Re: Howto build unofficial pli for your unsupported receiver #1383 algdu83

  • Senior Member
  • 36 posts

+1
Neutral

Posted 23 June 2018 - 07:02

https://cloud.mail.r.../8VJ9/bnSXwYxbb

There is functional neutrino for k pro by changing the dtb.img

 

can not anyone open it to understand how it is built?



Re: Howto build unofficial pli for your unsupported receiver #1384 sauna

  • Senior Member
  • 38 posts

0
Neutral

Posted 23 June 2018 - 08:45

there is also VITMOD OS v.2.0 RC5 (KODI / ENIGMA2 / NEUTRINO-MP / VDR) ki plus
 
 


Re: Howto build unofficial pli for your unsupported receiver #1385 thmls

  • Senior Member
  • 57 posts

+3
Neutral

Posted 23 June 2018 - 09:24

I would like to mention the problem with the drivers of tuner KI pro for enigma 2, there is a VITMOD atv + neutrino version. run android tv and with the power button long press starts neutrino the tuner work. I have 6 lnb and motors and they all work properly. I was wondering if neutrino drivers are the same as enigma 2

http://forum.satdigi...opic.php?t=6499

Re: Howto build unofficial pli for your unsupported receiver #1386 ras

  • Senior Member
  • 46 posts

0
Neutral

Posted 23 June 2018 - 09:40

 

Is there any hope for Enfinity image ?

Provide the right machine conf file and you'll get your image ;)

 

 

 

Again stuck "run",does not work 

 



Re: Howto build unofficial pli for your unsupported receiver #1387 thmls

  • Senior Member
  • 57 posts

+3
Neutral

Posted 23 June 2018 - 09:47

there is also VITMOD OS v.2.0 RC5 (KODI / ENIGMA2 / NEUTRINO-MP / VDR) ki plus


https://yadi.sk/d/VAAq5dEY3YHKrP

i tested with replace dtb ki pro not work neutrino can not scan

Re: Howto build unofficial pli for your unsupported receiver #1388 ras

  • Senior Member
  • 46 posts

0
Neutral

Posted 23 June 2018 - 10:11

 

 

Is there any hope for Enfinity image ?

Provide the right machine conf file and you'll get your image ;)

 

 

 

Again stuck "run",does not work 

 

 


Edited by ras, 23 June 2018 - 10:11.


Re: Howto build unofficial pli for your unsupported receiver #1389 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 23 June 2018 - 13:52

tests when compiliing for alien5 (2 times)

 

Initialising tasks: 100% |######################################################################################################| Time: 0:01:40
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: libdvbcsa-1.1.0-r0 do_fetch: Failed to fetch URL git://github.com/PLi-metas/libdvbcsa.git;protocol=git, attempting MIRRORS if available
ERROR: libdvbcsa-1.1.0-r0 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/frank/openpli-oe-core/openembedded-core/scripts:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/usr/bin/aarch64-oe-linux:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot/usr/bin/crossscripts:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/usr/sbin:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/usr/bin:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/sbin:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/bin:/home/frank/openpli-oe-core/bitbake/bin:/home/frank/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/frank"; LANG=C git -c core.fsyncobjectfiles=0 clone --bare --mirror git://github.com/PLi-metas/libdvbcsa.git /home/frank/openpli-oe-core/sources/git2/github.com.PLi-metas.libdvbcsa.git --progress failed with exit code 128, output:
Cloning into bare repository '/home/frank/openpli-oe-core/sources/git2/github.com.PLi-metas.libdvbcsa.git'...
fatal: remote error:
  Repository not found.

ERROR: libdvbcsa-1.1.0-r0 do_fetch: Fetcher failure for URL: 'git://github.com/PLi-metas/libdvbcsa.git;protocol=git'. Unable to fetch URL from any source.
ERROR: libdvbcsa-1.1.0-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/temp/log.do_fetch.32054
ERROR: Task (/home/frank/openpli-oe-core/pli-extras/recipes-multimedia/libdvbcsa/libdvbcsa.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2948 tasks of which 2944 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/frank/openpli-oe-core/pli-extras/recipes-multimedia/libdvbcsa/libdvbcsa.bb:do_fetch
Summary: There was 1 WARNING message shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
 


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1390 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 23 June 2018 - 14:39

error with azbox hd too:

 

Initialising tasks: 100% |######################################################################################################| Time: 0:01:26
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: linux-azbox-3.9.2-r0 do_fetch: Failed to fetch URL http://source.mynonp...-initrd-azboxhd, attempting MIRRORS if available
ERROR: linux-azbox-3.9.2-r0 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/frank/openpli-oe-core/openembedded-core/scripts:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/bin/mipsel-oe-linux:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot/usr/bin/crossscripts:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/sbin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/bin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/sbin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/bin:/home/frank/openpli-oe-core/bitbake/bin:/home/frank/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/frank"; /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/frank/openpli-oe-core/sources 'http://source.mynonp...6092013.tar.bz2' --progress=dot -v failed with exit code 8, output:
--2018-06-23 10:27:33--  http://source.mynonp...6092013.tar.bz2
Resolving source.mynonpublic.com (source.mynonpublic.com)... 37.187.109.154
Connecting to source.mynonpublic.com (source.mynonpublic.com)|37.187.109.154|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2018-06-23 10:27:34 ERROR 404: Not Found.


ERROR: linux-azbox-3.9.2-r0 do_fetch: Fetcher failure for URL: 'http://source.mynonp...-initrd-azboxhd'. Unable to fetch URL from any source.
ERROR: linux-azbox-3.9.2-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/temp/log.do_fetch.30787
ERROR: Task (/home/frank/openpli-oe-core/pli-extras/meta-azbox/recipes-bsp/linux/linux-azbox_3.9.2.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1339 tasks of which 1008 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/frank/openpli-oe-core/pli-extras/meta-azbox/recipes-bsp/linux/linux-azbox_3.9.2.bb:do_fetch
Summary: There was 1 WARNING message shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
frank@frank:~/openpli-oe-core$
 


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1391 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 24 June 2018 - 08:02

@ras

 

Regarding enfinity there is no new changes so don't expect anything as we don't have the box and nobody contributes nothing will happen sadly.


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1392 ras

  • Senior Member
  • 46 posts

0
Neutral

Posted 24 June 2018 - 09:46

@ras

 

Regarding enfinity there is no new changes so don't expect anything as we don't have the box and nobody contributes nothing will happen sadly.

 

Ok,thx



Re: Howto build unofficial pli for your unsupported receiver #1393 ftp21_

  • Senior Member
  • 73 posts

+9
Neutral

Posted 24 June 2018 - 17:52

Hi,
With some patches(i find the patch on Libreelec Github) i'm able to build avl6862 modules with Linkdroid kernel tree, but i'm unable to find the *.ko and images boot without tuner.
 
I also add the module to defconfig.


Re: Howto build unofficial pli for your unsupported receiver #1394 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 24 June 2018 - 18:17

 

Hi,
With some patches(i find the patch on Libreelec Github) i'm able to build avl6862 modules with Linkdroid kernel tree, but i'm unable to find the *.ko and images boot without tuner.
 
I also add the module to defconfig.

 

 

Share what you did maybe I can help fix this on pli-extras ;)


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1395 ftp21_

  • Senior Member
  • 73 posts

+9
Neutral

Posted 24 June 2018 - 18:56

 

Hi,
With some patches(i find the patch on Libreelec Github) i'm able to build avl6862 modules with Linkdroid kernel tree, but i'm unable to find the *.ko and images boot without tuner.
 
I also add the module to defconfig.

 

--- ../kernels/common/include/uapi/linux/dvb/dmx.h      2018-03-14 08:44:21.000000000 +0100
+++ build/tmp/work/alien5-oe-linux/linux-linkdroid/3.14.29-.1/common/include/uapi/linux/dvb/dmx.h       2018-06-23 17:11:53.650750869 +0200
@@ -113,7 +113,7 @@
        int num_decoders;
 } dmx_caps_t;

-enum dmx_source_t {
+typedef enum dmx_source_t {
        DMX_SOURCE_FRONT0 = 0,
        DMX_SOURCE_FRONT1,
        DMX_SOURCE_FRONT2,
@@ -125,7 +125,7 @@
        DMX_SOURCE_FRONT0_OFFSET = 100,
        DMX_SOURCE_FRONT1_OFFSET,
        DMX_SOURCE_FRONT2_OFFSET
-};
+}dmx_source_t;

 struct dmx_stc {
        unsigned int num;       /* input : which STC? 0..N */

On .bb i add EXTRA_OEMAKE = "LDFLAGS=''" and 

oe_runmake  ${B}/drivers/amlogic/dvb-avl/
  install -d ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/aml.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/aml_fe.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/avl6862.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/r848a.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/aml_dvb.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/aml_dmx.o  ${B}/drivers/amlogic/dvb-avl/



Re: Howto build unofficial pli for your unsupported receiver #1396 ftp21_

  • Senior Member
  • 73 posts

+9
Neutral

Posted 24 June 2018 - 19:03

Sorry.

I add the dvb-avl directory from mecool tree and i modify the Makefile to add it



Re: Howto build unofficial pli for your unsupported receiver #1397 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 25 June 2018 - 03:05

@ ftp21_
Change "oe_runmake ${B}/drivers/amlogic/dvb-avl/"
with "oe_runmake ${S}/drivers/amlogic/dvb-avl/"
and you will get *.o files which I think can be compiled into *.ko files during the image build process.

Re: Howto build unofficial pli for your unsupported receiver #1398 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 03:43

I need to know the difference between kernel 3.3.1 and 3.9.2 for azbox hd. Today I did the installation this image (openpli-enigma2-homebuild-azboxhd_azup.zip) posted by Persian Prince (May, 21) only for tests, then I saw the new kernel inside...


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1399 taree

  • Senior Member
  • 48 posts

0
Neutral

Posted 25 June 2018 - 03:52

takitr any update for wetekplay2 ?



Re: Howto build unofficial pli for your unsupported receiver #1400 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 08:00

tests when compiliing for alien5 (2 times)

 

Initialising tasks: 100% |######################################################################################################| Time: 0:01:40
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: libdvbcsa-1.1.0-r0 do_fetch: Failed to fetch URL git://github.com/PLi-metas/libdvbcsa.git;protocol=git, attempting MIRRORS if available
ERROR: libdvbcsa-1.1.0-r0 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/frank/openpli-oe-core/openembedded-core/scripts:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/usr/bin/aarch64-oe-linux:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot/usr/bin/crossscripts:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/usr/sbin:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/usr/bin:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/sbin:/home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/recipe-sysroot-native/bin:/home/frank/openpli-oe-core/bitbake/bin:/home/frank/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/frank"; LANG=C git -c core.fsyncobjectfiles=0 clone --bare --mirror git://github.com/PLi-metas/libdvbcsa.git /home/frank/openpli-oe-core/sources/git2/github.com.PLi-metas.libdvbcsa.git --progress failed with exit code 128, output:
Cloning into bare repository '/home/frank/openpli-oe-core/sources/git2/github.com.PLi-metas.libdvbcsa.git'...
fatal: remote error:
  Repository not found.

ERROR: libdvbcsa-1.1.0-r0 do_fetch: Fetcher failure for URL: 'git://github.com/PLi-metas/libdvbcsa.git;protocol=git'. Unable to fetch URL from any source.
ERROR: libdvbcsa-1.1.0-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/frank/openpli-oe-core/build/tmp/work/aarch64-oe-linux/libdvbcsa/1.1.0-r0/temp/log.do_fetch.32054
ERROR: Task (/home/frank/openpli-oe-core/pli-extras/recipes-multimedia/libdvbcsa/libdvbcsa.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2948 tasks of which 2944 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/frank/openpli-oe-core/pli-extras/recipes-multimedia/libdvbcsa/libdvbcsa.bb:do_fetch
Summary: There was 1 WARNING message shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
 

 

It should be ok now.

 

error with azbox hd too:

 

Initialising tasks: 100% |######################################################################################################| Time: 0:01:26
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: linux-azbox-3.9.2-r0 do_fetch: Failed to fetch URL http://source.mynonp...-initrd-azboxhd, attempting MIRRORS if available
ERROR: linux-azbox-3.9.2-r0 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/frank/openpli-oe-core/openembedded-core/scripts:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/bin/mipsel-oe-linux:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot/usr/bin/crossscripts:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/sbin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/usr/bin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/sbin:/home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/recipe-sysroot-native/bin:/home/frank/openpli-oe-core/bitbake/bin:/home/frank/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/frank"; /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/frank/openpli-oe-core/sources 'http://source.mynonp...6092013.tar.bz2' --progress=dot -v failed with exit code 8, output:
--2018-06-23 10:27:33--  http://source.mynonp...6092013.tar.bz2
Resolving source.mynonpublic.com (source.mynonpublic.com)... 37.187.109.154
Connecting to source.mynonpublic.com (source.mynonpublic.com)|37.187.109.154|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2018-06-23 10:27:34 ERROR 404: Not Found.


ERROR: linux-azbox-3.9.2-r0 do_fetch: Fetcher failure for URL: 'http://source.mynonp...-initrd-azboxhd'. Unable to fetch URL from any source.
ERROR: linux-azbox-3.9.2-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/frank/openpli-oe-core/build/tmp/work/azboxhd-oe-linux/linux-azbox/3.9.2-r0/temp/log.do_fetch.30787
ERROR: Task (/home/frank/openpli-oe-core/pli-extras/meta-azbox/recipes-bsp/linux/linux-azbox_3.9.2.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1339 tasks of which 1008 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/frank/openpli-oe-core/pli-extras/meta-azbox/recipes-bsp/linux/linux-azbox_3.9.2.bb:do_fetch
Summary: There was 1 WARNING message shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
frank@frank:~/openpli-oe-core$
 

 

kernel 3.9.2 is not available public I guess, I have to upload it somewhere like mediafire so you can download and put it in your "sources" directory.

 

I need to know the difference between kernel 3.3.1 and 3.9.2 for azbox hd. Today I did the installation this image (openpli-enigma2-homebuild-azboxhd_azup.zip) posted by Persian Prince (May, 21) only for tests, then I saw the new kernel inside...

 

kernel 3.3.1 is our old kernel from https://github.com/OpenAZBox then we (me and the_ripper) start using kernel 3.9.2 for azbox.


Open Vision sources: https://github.com/OpenVisionE2



3 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users