Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #1401 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 08:01

 

 

Hi,
With some patches(i find the patch on Libreelec Github) i'm able to build avl6862 modules with Linkdroid kernel tree, but i'm unable to find the *.ko and images boot without tuner.
 
I also add the module to defconfig.

 

--- ../kernels/common/include/uapi/linux/dvb/dmx.h      2018-03-14 08:44:21.000000000 +0100
+++ build/tmp/work/alien5-oe-linux/linux-linkdroid/3.14.29-.1/common/include/uapi/linux/dvb/dmx.h       2018-06-23 17:11:53.650750869 +0200
@@ -113,7 +113,7 @@
        int num_decoders;
 } dmx_caps_t;

-enum dmx_source_t {
+typedef enum dmx_source_t {
        DMX_SOURCE_FRONT0 = 0,
        DMX_SOURCE_FRONT1,
        DMX_SOURCE_FRONT2,
@@ -125,7 +125,7 @@
        DMX_SOURCE_FRONT0_OFFSET = 100,
        DMX_SOURCE_FRONT1_OFFSET,
        DMX_SOURCE_FRONT2_OFFSET
-};
+}dmx_source_t;

 struct dmx_stc {
        unsigned int num;       /* input : which STC? 0..N */

On .bb i add EXTRA_OEMAKE = "LDFLAGS=''" and 

oe_runmake  ${B}/drivers/amlogic/dvb-avl/
  install -d ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/aml.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/aml_fe.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/avl6862.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/r848a.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/aml_dvb.o  ${B}/drivers/amlogic/dvb-avl/
  cp -fr ${S}/drivers/amlogic/dvb-avl/aml_dmx.o  ${B}/drivers/amlogic/dvb-avl/

 

Thanks a lot for this post, I'm testing with some changes now ;)


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1402 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 08:03

takitr any update for wetekplay2 ?

 

What kind of update do you need for wetekplay2 ?


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1403 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 11:05

Well I did it, I'm compiling a new image so you could test ;)

 

Sources are not public yet ...


Edited by Persian Prince, 25 June 2018 - 11:05.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1404 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 11:22

If you want to clean and compile a kernel with some changes this could help you : https://github.com/P...velop/Kernel.md

 

;)


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1405 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 11:31

New test image for "k1pro" with dedicated avl patch, pre-installed :

 

kernel-module-avl6862 (autoload)

kernel-module-wetekdvb

kernel-module-wetekplay

 

separate modules and edited "k1pro.dts" based on "alien5.dts" : http://www.mediafire...sdcard.zip/file

 

I'm not sure about "k1pro.dts" anyway but I hope it works :)


Edited by Persian Prince, 25 June 2018 - 11:33.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1406 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 11:52

Sources are public now: https://github.com/P...05d87fe9d69cb60

 

You can update pli-extras and compile yourself :)


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1407 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 25 June 2018 - 12:37

Thanks a lot Persian Prince, for your help.

Since, I am on my vacations, so can't test it.

Anybody, please test it and give feedback about booting and dvb support.



Re: Howto build unofficial pli for your unsupported receiver #1408 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 12:40

New test image for "k1pro" with dedicated avl patch, pre-installed :

 

kernel-module-avl6862 (autoload)

kernel-module-wetekdvb

kernel-module-wetekplay

 

separate modules and edited "k1pro.dts" based on "alien5.dts" : http://www.mediafire...sdcard.zip/file

 

I'm not sure about "k1pro.dts" anyway but I hope it works :)

 

File not found... (mediafire), but I'll try to compile and test.


Edited by frankviana, 25 June 2018 - 12:44.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1409 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 12:45

Sorry last uploaded image had a bug, fixed version: http://www.mediafire...sdcard.zip/file

New test image for "k1pro" with dedicated avl/wetek patch, pre-installed :

kernel-module-avl6862 (autoload)
kernel-module-wetekdvb
kernel-module-wetekplay

separate modules and edited "k1pro.dts" based on "alien5.dts".

I'm not sure about "k1pro.dts" anyway but I hope it works :)

Also I'm working on "k2pro" (new version) and the test image will be ready soon :)


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1410 kookesam

  • Senior Member
  • 151 posts

0
Neutral

Posted 25 June 2018 - 12:53

hello Mister Persian Prince for formuler s mini it's possible enigma2 thank you go to Iran.



Re: Howto build unofficial pli for your unsupported receiver #1411 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 13:15

Sorry last uploaded image had a bug, fixed version: http://www.mediafire...sdcard.zip/file

New test image for "k1pro" with dedicated avl/wetek patch, pre-installed :

kernel-module-avl6862 (autoload)
kernel-module-wetekdvb
kernel-module-wetekplay

separate modules and edited "k1pro.dts" based on "alien5.dts".

I'm not sure about "k1pro.dts" anyway but I hope it works :)

Also I'm working on "k2pro" (new version) and the test image will be ready soon :)

 

Testing... boot show image after connect/disconnect HDMI cable. Changing to PLI-HD, show full image. No tuner listed, media player don't play anything (this receiver cannot decode streams)


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1412 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 13:21

root@k1pro:~# enigma2

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10

ENIGMA_DEBUG_LVL=3

[MAIN] executing main

close failed in file object destructor:

IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error

close failed in file object destructor:

IOError: [Errno 5] Input/output error

[eServiceMP3] Gstreamer error: There is no codec present that can handle the stream's type. (6) from dvbvideosink0

[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Internal data stream error. (1) from qtdemux0

 

Attached File  screenshot_20150101011330.jpg   49.29KB   5 downloads


Edited by frankviana, 25 June 2018 - 13:24.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1413 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 13:27

Ok please wait for the new test image, I'm compiling with new changes ...


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1414 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 13:34

Tuner list (empty)

 

Attached File  screenshot_20150101012101.jpg   48.08KB   6 downloads

 

Attached File  screenshot_20150101012122.jpg   30.03KB   6 downloads

 

Media player list, but no image and no sound

 

Attached File  screenshot_20150101012328.jpg   91.77KB   6 downloads

 

Thanks


Edited by frankviana, 25 June 2018 - 13:35.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1415 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 13:37

Ok please wait for the new test image, I'm compiling with new changes ...

 

thank you for your hard work... ready for tests, :)


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1416 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 13:49

Did you try:

 

modprobe wetekdvb

modprobe wetekplay

 

for loading extra dvb modules?


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1417 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 13:56

Did you try:

 

modprobe wetekdvb

modprobe wetekplay

 

for loading extra dvb modules?

 

root@k1pro:~# modprobe wetekdvb

Segmentation fault

root@k1pro:~#
modprobe wetekplay

 

wetek play ok, wetekdvb segmentation fault.


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1418 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 14:09

Sorry... enigma2 busy was testing.., now I'm testing modprobe wetekdvb again and past some time waiting (process)....


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1419 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 25 June 2018 - 14:18

First test image for "k2pro" (new version) with dedicated avl/wetek patch, pre-installed :
 
kernel-module-avl6862 (built-in,autoload)
kernel-module-wetekdvb (autoload)
kernel-module-wetekplay (autoload)
 
You need to edit "k2pro.dts" later yourself as it's just a copy of "k1pro.dts" based on "alien5.dts".
 
 
You can test this on your "k1pro" also ;)

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1420 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 25 June 2018 - 14:38

 

First test image for "k2pro" (new version) with dedicated avl/wetek patch, pre-installed :
 
kernel-module-avl6862 (built-in,autoload)
kernel-module-wetekdvb (autoload)
kernel-module-wetekplay (autoload)
 
You need to edit "k2pro.dts" later yourself as it's just a copy of "k1pro.dts" based on "alien5.dts".
 
 
You can test this on your "k1pro" also ;)

 

 

Testes k1 pro... boot ok, but same problems: tuner, media player, audio...

 

thanks.


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users