Jump to content


Photo

Howto build unofficial pli for your unsupported receiver

Started by Persian Prince, 30 Jan 2018 09:10

  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #1481 ledtou

  • Member
  • 18 posts

0
Neutral

Posted 1 July 2018 - 13:49

Thanks Persian what about K3 pro 


Re: Howto build unofficial pli for your unsupported receiver #1482 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 1 July 2018 - 14:26

 

What's the problem ? I can give you a working config I've already compiled with, note that you need to turn off alot of features to get it to compile since the amlogic team didn't get the dependencies right.

 

I need a working bitbake recipe like https://github.com/P...cool_3.14.29.bb so I can compile it in OE.

 

Please provide us any information that you think could help us :)

 

Well, I can't really test on bitbake beacuse it fails to build every time with this error, If you can fix it that would be great

 

0+0 records in
0+0 records out
0 bytes copied, 0.000247889 s, 0.0 kB/s
Model:  (file)
Disk /home/oealliancebuilder/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-homebuild-k2pro-sd.img: 604MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End    Size   Type     File system  Flags
 1      4194kB  113MB  109MB  primary  fat16        boot, lba
 2      113MB   604MB  491MB  primary

mkfs.vfat: file /home/oealliancebuilder/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
mkfs.fat 4.1 (2017-01-24)
WARNING: /home/oealliancebuilder/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_alien5sdimg.29393:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/oealliancebuilder/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
ERROR: Function failed: do_image_alien5sdimg (log file is located at /home/oealliancebuilder/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_alien5sdimg.29393)
 

anyway I can tell you the steps to compile and maybe you can make a recipe?

 

looking at the recipe you linked I can see that It's somehow patching the tree for the dvb support which is not needed for the coreelec tree since the dvb drivers are already in the tree so the avl.patch is not needed for the coreelec tree

also looking at the do_compile_prepend function I don't really understand why the recipe is copying the object files and run make for each module seprately, but these might be not needed also.

anyway the recipe should do these steps only

clone the coreelec repo https://github.com/C...C/linux-amlogic (use the amlogic-3.14-nougat branch)

copy the defconfig to the kernel folder and run make to build the kernel

also the kernel should be compiled with this toolchain as I said earlier

https://releases.lin...09_linux.tar.xz

 

If you can fix the error I reported above I might be able to test .

 

appreciate your work and patience

 

Thanks


Re: Howto build unofficial pli for your unsupported receiver #1483 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 1 July 2018 - 14:27

 

I've built it for k2pro, It's probably not going to work on k1pro, If you have k2pro I I can upload it for you to test

 

 

 

Don't worry. Share the image and kernel config :)

 

https://drive.google...2Uiap-dFppm55XU

you might need to flash the aml_autoscript.zip from the android update app to be able to boot since I changed the uboot script


Re: Howto build unofficial pli for your unsupported receiver #1484 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 1 July 2018 - 14:51

@Persian Prince:

I have just found that probably there is a typo in the machine conf files for K1Pro, K2Pro, K1Plus and K3Pro, on two places it is typed as "avl6882" which should be "avl6862" instead:

KERNEL_MODULE_AUTOLOAD += "\
    se2io_se \
    ampanel \
    a5stb \
    mali \
    rfcomm \
    hidp \
    bluetooth \
    6lowpan-iphc \
    libcrc32c \
    mceusb \
    rc-core \
    cfg80211 \
    8189es \
    avl6882 \
"

MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "\
    firmware-avl6882 \
    kernel-module-avl6862 \
"

Re: Howto build unofficial pli for your unsupported receiver #1485 challou

  • Member
  • 20 posts

0
Neutral

Posted 1 July 2018 - 16:59

nieuws about azbox hd ????????


Re: Howto build unofficial pli for your unsupported receiver #1486 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 1 July 2018 - 18:28

Another problem when building the feeds

 

| DEBUG: Executing shell function do_install
| install: cannot stat '/home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/CCcam.aarch64': No such file or directory
| WARNING: /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/temp/run.do_install.12796:1 exit 1 from 'install -m 0755 /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/CCcam.aarch64 /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/image/usr/bin/CCcam'
| ERROR: Function failed: do_install (log file is located at /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/temp/log.do_install.12796)
ERROR: Task (/home/oealliancebuilder/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-cccam_2.3.2.bb:do_install) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5397 tasks of which 5392 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/oealliancebuilder/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-cccam_2.3.2.bb:do_install
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:129: recipe for target 'feed' failed
make: *** [feed] Error 1
 

This is because the cccam binaries provided by openpli at http://downloads.ope...CCcam-2.3.2.zip doesn't contain a binary for aarch64.

Can I tell bitbake to ignore cccam and not build it since I don't want it for now


Re: Howto build unofficial pli for your unsupported receiver #1487 takitr

  • Senior Member
  • 77 posts

+24
Neutral

Posted 1 July 2018 - 21:25


@Persian Prince:
I have just found that probably there is a typo in the machine conf files for K1Pro, K2Pro, K1Plus and K3Pro, on two places it is typed as "avl6882" which should be "avl6862" instead:

KERNEL_MODULE_AUTOLOAD += "\
    se2io_se \
    ampanel \
    a5stb \
    mali \
    rfcomm \
    hidp \
    bluetooth \
    6lowpan-iphc \
    libcrc32c \
    mceusb \
    rc-core \
    cfg80211 \
    8189es \
    avl6882 \
"

MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "\
    firmware-avl6882 \
    kernel-module-avl6862 \
"

Yes it must be avl6862(k series)

Re: Howto build unofficial pli for your unsupported receiver #1488 starz

  • Senior Member
  • 59 posts

+1
Neutral

Posted 1 July 2018 - 22:33

Thank for your big effort Persian Prince.I've tested k1plus test image and remote still not working.

 

I also tried 3 different remote.conf files they didn't work,too

In my zip attached

'remote-android.conf' is from working android part of my box.

'remote-vitmod-le.conf is again from working image of vitmod-le.

'remote-pliextras' is from your gith source.

 

I don't know what is the problem,why remote doesn't work :unsure:

Attached Files


Re: Howto build unofficial pli for your unsupported receiver #1489 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 2 July 2018 - 07:56

 

Thanks Persian what about K3 pro 

 

 

It's not ready yet. (Obviously)

 

 

@Persian Prince:

I have just found that probably there is a typo in the machine conf files for K1Pro, K2Pro, K1Plus and K3Pro, on two places it is typed as "avl6882" which should be "avl6862" instead:

KERNEL_MODULE_AUTOLOAD += "\
    se2io_se \
    ampanel \
    a5stb \
    mali \
    rfcomm \
    hidp \
    bluetooth \
    6lowpan-iphc \
    libcrc32c \
    mceusb \
    rc-core \
    cfg80211 \
    8189es \
    avl6882 \
"

MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "\
    firmware-avl6882 \
    kernel-module-avl6862 \
"

 

Thanks a lot for the report, fixed: https://github.com/P...de3eeaa37e8df2a

 

avl6882 needs a firmware but what about avl6862?

 

nieuws about azbox hd ????????

 

Should be any? Is there a problem?

 

Another problem when building the feeds

 

| DEBUG: Executing shell function do_install
| install: cannot stat '/home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/CCcam.aarch64': No such file or directory
| WARNING: /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/temp/run.do_install.12796:1 exit 1 from 'install -m 0755 /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/CCcam.aarch64 /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/image/usr/bin/CCcam'
| ERROR: Function failed: do_install (log file is located at /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/temp/log.do_install.12796)
ERROR: Task (/home/oealliancebuilder/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-cccam_2.3.2.bb:do_install) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5397 tasks of which 5392 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/oealliancebuilder/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-cccam_2.3.2.bb:do_install
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:129: recipe for target 'feed' failed
make: *** [feed] Error 1
 

This is because the cccam binaries provided by openpli at http://downloads.ope...CCcam-2.3.2.zip doesn't contain a binary for aarch64.

Can I tell bitbake to ignore cccam and not build it since I don't want it for now

 

I don't test the feeds, I just test the image build that's all :)


Open Vision sources: https://github.com/OpenVisionE2

Re: Howto build unofficial pli for your unsupported receiver #1490 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 2 July 2018 - 07:57

 

Thank for your big effort Persian Prince.I've tested k1plus test image and remote still not working.

 

I also tried 3 different remote.conf files they didn't work,too

In my zip attached

'remote-android.conf' is from working android part of my box.

'remote-vitmod-le.conf is again from working image of vitmod-le.

'remote-pliextras' is from your gith source.

 

I don't know what is the problem,why remote doesn't work :unsure:

 

 

Maybe we need a kernel module for it ...


Open Vision sources: https://github.com/OpenVisionE2

Re: Howto build unofficial pli for your unsupported receiver #1491 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 2 July 2018 - 14:22

New test image for "k1pro" with my new changes regarding avl6862 tuner: http://www.mediafire...sdcard.zip/file

 

Test and report please :)


Open Vision sources: https://github.com/OpenVisionE2

Re: Howto build unofficial pli for your unsupported receiver #1492 mimisiku

  • Senior Member
  • 5,518 posts

+115
Excellent

Posted 2 July 2018 - 14:27

I own a genuine DM800se v2 with the new twin DVB-C/T2 SiLabs tuner. Could somebody be willing to compile a complete image with OScam? I have no Desktop PC and no Linux skills. A downloadable .nfi file would be greatly appreciated.
Met één been in het graf..... Helaas

Re: Howto build unofficial pli for your unsupported receiver #1493 ftp21_

  • Senior Member
  • 73 posts

+9
Neutral

Posted 2 July 2018 - 14:35

New test image for "k1pro" with my new changes regarding avl6862 tuner: http://www.mediafire...sdcard.zip/file

 

Test and report please :)

No tuner found.

Bootlog: http://www.heypasteit.com/clip/0IJQ06


Re: Howto build unofficial pli for your unsupported receiver #1494 fc_candido

  • Member
  • 7 posts

0
Neutral

Posted 3 July 2018 - 01:25

in k1 pro

##############################################
#                  CoreELEC                  #
#            https://coreelec.org            #
##############################################

CoreELEC (official): 8.90.4 (S905.arm)
CoreELEC:~ # lsmod
Module                  Size  Used by
hci_uart               30134  1
nfsv3                  23413  1
nfs                   169368  2 nfsv3
lockd                  67751  2 nfs,nfsv3
sunrpc                207138  6 nfs,lockd,nfsv3
r848a                  34365  1
avl6862               253453  1
dhd                   752447  0
8021q                  19007  0
btsdio                  4394  0
bluetooth             339002  4 btsdio,hci_uart
cfg80211              374858  1 dhd
6lowpan_iphc           10183  1 bluetooth
mali                  192433  5
ir_rc6_decoder          4037  0
aml_fe                  5226  0
ir_nec_decoder          2733  0
aml                    94299  12 aml_fe
dvb_core              113135  2 aml,aml_fe
videobuf2_vmalloc       5553  1 dvb_core
videobuf2_memops        1780  1 videobuf2_vmalloc
frame_vector            2742  2 videobuf2_vmalloc,videobuf2_memops
videobuf2_common       36014  1 dvb_core
wifi_dummy               806  0
meson_ir                3997  0
rc_core                33912  4 meson_ir,ir_nec_decoder,ir_rc6_decoder
amlvideodri            12666  1
videobuf_res            5378  1 amlvideodri
videobuf_core          16643  2 amlvideodri,videobuf_res
videodev              161922  3 amlvideodri,videobuf2_common
media                  25277  2 videodev,dvb_core
dwc_otg               233249  0
fbcon                  38031  0
bitblit                 4468  1 fbcon
softcursor              1168  1 bitblit
font                    7327  1 fbcon

Re: Howto build unofficial pli for your unsupported receiver #1495 taree

  • Senior Member
  • 48 posts

0
Neutral

Posted 3 July 2018 - 03:38

New test images:

 

alien5: http://www.mediafire...sdcard.zip/file

 

k1plus: http://www.mediafire...sdcard.zip/file

 

k1pro: http://www.mediafire...sdcard.zip/file

 

k2pro: http://www.mediafire...sdcard.zip/file

no new test image for wetekplay2? ^_^


Re: Howto build unofficial pli for your unsupported receiver #1496 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 3 July 2018 - 05:56

I own a genuine DM800se v2 with the new twin DVB-C/T2 SiLabs tuner. Could somebody be willing to compile a complete image with OScam? I have no Desktop PC and no Linux skills. A downloadable .nfi file would be greatly appreciated.

 

Ask in this thread: https://forums.openp...all-dreamboxes/

 

Maybe "zeros" could help you.

 

I spend my time on not-ready boxes :)

 

 

no new test image for wetekplay2?  ^_^

 

We didn't change anything for wetekplay2 so you could compile a new image yourself ;)

 

Test images are for the time we do change the sources.


Open Vision sources: https://github.com/OpenVisionE2

Re: Howto build unofficial pli for your unsupported receiver #1497 bumperbee

  • Senior Member
  • 284 posts

+10
Neutral

Posted 3 July 2018 - 06:47

Hi Everyone, the link below for Dm7020Hdv2 image on page 1 is no longer working. Could update the link please? Thanks

dm7020hdv2 : http://www.mediafire...020hdv2.nfi.zip


Re: Howto build unofficial pli for your unsupported receiver #1498 Guardian

  • Senior Member
  • 104 posts

+2
Neutral

Posted 3 July 2018 - 08:12

Images for K1pro and K2pro should be the same because hardware is identical, K2pro only has more memory.

 

Like Azbox Elite, Premium and Premium+

 

Will test latest K1pro on a K2pro tonight


Edited by Guardian, 3 July 2018 - 08:13.

Re: Howto build unofficial pli for your unsupported receiver #1499 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 3 July 2018 - 09:12

Images for K1pro and K2pro should be the same because hardware is identical, K2pro only has more memory.
 
Like Azbox Elite, Premium and Premium+
 
Will test latest K1pro on a K2pro tonight


Yes, but second version (s905d)

I have K2 V1 (s905)

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)

Re: Howto build unofficial pli for your unsupported receiver #1500 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 3 July 2018 - 12:07

Images for K1pro and K2pro should be the same because hardware is identical, K2pro only has more memory.

Both KI Pro and KII Pro have 2GB RAM and 16GB internal memory.
KI Pro & KII Pro (new version) have S905D chip while KII Pro (old version) has S905 chip.
Back to [EN] Third-Party Development

10 user(s) are reading this topic

0 members, 9 guests, 0 anonymous users


    Bing (1)
  1. Forums
  2. → PLi® Development
  3. → [EN] Third-Party Development