2740 replies to this topic

[MastaG]

Did you built today?
If yes, spark or spark7162?
Today I reworked the meta-fulan layer a bit.
Spark images should now ship with serviceapp and exteplayer3 as the default player.

PLi doesnt install a channellist by default.

I dont know if the spark dvb drivers support ac3+.. perhaps lprot or tapaat can answer this.

Edited by MastaG, 7 August 2018 - 19:15.

[wu-li]

Did you built today?
If yes, spark or spark7162?
Today I reworked the meta-fulan layer a bit.
Spark images should now ship with serviceapp and exteplayer3 as the default player.

PLi doesnt install a channellist by default.

I dont know if the spark dvb drivers support ac3+.. perhaps lprot or tapaat can answer this.

 

 

'SPARK 7111' FOR GOLDEN MEDIA - SPARK RELOADED, the successor to LX

Golden Media Spark 990 LX ------> after November 2011 Golden Media Spark Reloaded from HBB TV (shows that it is signed - how to run?)
OPENATV:
$ {@ bb.utils.contains ('MACHINEBUILD', 'spark reloaded', 'GOLDEN MEDIA', '', d)} \
$ {@ bb.utils.contains ('MACHINEBUILD', 'spark lx', 'GOLDEN MEDIA', '', d)} \

The first one was created from 8-08-18 at around 1pm - then there were "conversions", "painting" (I saw it - several more recompilations).

The last image around 18 o'clock

OSCAM - problem with (dvbapi) Demuxer - "can not see" - no image and no wonder.
4Fun.TV> AUDIO <"MPEG" - only> NO "AC3 + qaa".

These are the first moments of observation.

Thanks !

[rantanplan]

Sounds like problem of the used 'elf'.
There are 3 different 'elf'
They can also be swapped locally for Flash.

Edited by rantanplan, 8 August 2018 - 00:12.

[zeros]

bumperbee, can you confirm, that the v2 image is OK for you?
I fixed in today morning the feed as well. It is now in such a folder:
/feeds/openpli-pli-extras

Edited by zeros, 8 August 2018 - 06:14.

[bumperbee]

Hi All Masters, thanks very much for all the hard works.

Best Regards

   

[bumperbee]

Yes Master Zeros. I will report back once I try it out

[guard77]

Good afternoon, dear zeros!
Thank you for your great work. I like OpenPLi image ever since I had a DM800 HD. However, I can’t use your firmware on DM900 UHD, because it does not work at the same time to use both EMU and CI+ module. For module operation I use NN2 plugins https://board.newnig...itung/?pageNo=1.

Separately, EMU and module work great. It's worth switching from viewing the channel with CI to the channel for the EMU, as the problems begin. The sound disappears or the image stops.
Can you fix something in the firmware so that both EMU and CI + work well together? Thank you.

Edited by guard77, 8 August 2018 - 06:39.

[BarviX]

 

Did you built today?
If yes, spark or spark7162?
Today I reworked the meta-fulan layer a bit.
Spark images should now ship with serviceapp and exteplayer3 as the default player.

PLi doesnt install a channellist by default.

I dont know if the spark dvb drivers support ac3+.. perhaps lprot or tapaat can answer this.

 

 

'SPARK 7111' FOR GOLDEN MEDIA - SPARK RELOADED, the successor to LX

Golden Media Spark 990 LX ------> after November 2011 Golden Media Spark Reloaded from HBB TV (shows that it is signed - how to run?)
OPENATV:
$ {@ bb.utils.contains ('MACHINEBUILD', 'spark reloaded', 'GOLDEN MEDIA', '', d)} \
$ {@ bb.utils.contains ('MACHINEBUILD', 'spark lx', 'GOLDEN MEDIA', '', d)} \

The first one was created from 8-08-18 at around 1pm - then there were "conversions", "painting" (I saw it - several more recompilations).

The last image around 18 o'clock

OSCAM - problem with (dvbapi) Demuxer - "can not see" - no image and no wonder.
4Fun.TV> AUDIO <"MPEG" - only> NO "AC3 + qaa".

These are the first moments of observation.

Thanks !

 

http://taapat.ho.ua/...-r0.4_spark.ipk

http://taapat.ho.ua/...-r0.0_spark.ipk

[zeros]

I can't fix it, CI + support, you know..
But maybe someone from the team is counting on this concern. Thank you for your feedback!
The requested thing should work on the NEWNIGMA2 image.

[wu-li]

 

 

Did you built today?
If yes, spark or spark7162?
Today I reworked the meta-fulan layer a bit.
Spark images should now ship with serviceapp and exteplayer3 as the default player.

PLi doesnt install a channellist by default.

I dont know if the spark dvb drivers support ac3+.. perhaps lprot or tapaat can answer this.

 

 

'SPARK 7111' FOR GOLDEN MEDIA - SPARK RELOADED, the successor to LX

Golden Media Spark 990 LX ------> after November 2011 Golden Media Spark Reloaded from HBB TV (shows that it is signed - how to run?)
OPENATV:
$ {@ bb.utils.contains ('MACHINEBUILD', 'spark reloaded', 'GOLDEN MEDIA', '', d)} \
$ {@ bb.utils.contains ('MACHINEBUILD', 'spark lx', 'GOLDEN MEDIA', '', d)} \

The first one was created from 07-08-18 at around 1pm - then there were "conversions", "painting" (I saw it - several more recompilations).

The last image around 18 o'clock

OSCAM - problem with (dvbapi) Demuxer - "can not see" - no image and no wonder.
4Fun.TV> AUDIO <"MPEG" - only> NO "AC3 + qaa".

These are the first moments of observation.

Thanks !

 

http://taapat.ho.ua/...-r0.4_spark.ipk

http://taapat.ho.ua/...-r0.0_spark.ipk

 

[guard77]

Thank you for not leaving my question without attention. Of course, maybe I do not understand something, but it seems to me that it's not entirely lack of support for CI+, since initially there is no CI+ support from DMM, Newnigma, TS or Merlin, but after installing the plugins mentioned by me everything works fine and there are no conflicts between the module and the EMU.

[wu-li]

SPARK 7111

 

 

 

AFTER CHANGES

 

DEBUG: SITE files ['endian-little', 'bit-32', 'sh-common', 'common-linux', 'common-glibc', 'sh4-linux', 'common']
DEBUG: Executing shell function do_compile
NOTE: make -j 2 DRIVER_TOPDIR=/home/wu/openpli-oe-core/build/tmp/work-shared/spark/kernel-source DESTDIR=/home/wu/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/image SUBDIRS=libmme_host
ERROR: oe_runmake failed
Making all in libmme_host
make[1]: Entering directory '/home/wu/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/git/tools/libmme_host'
make[1]: *** No rule to make target '/home/wu/openpli-oe-core/build/tmp/work-shared/spark/kernel-source/multicom/mme/mme_linux_user.c', needed by '/home/wu/openpli-oe-core/build/tmp/work-shared/spark/kernel-source/multicom/mme/mme_linux_user.lo'.  Stop.
make[1]: Leaving directory '/home/wu/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/git/tools/libmme_host'
Makefile:388: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
WARNING: /home/wu/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/temp/run.do_compile.944:1 exit 1 from 'exit 1'
ERROR: Function failed: do_compile (log file is located at /home/wu/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/temp/log.do_compile.944)

[zeros]

guard77, I was thinking about your problem. You said, that separately EMU and module work great. Have you tried from feed that plugin?
systemplugins-commoninterfaceassignment

Read these topics, especially the latest:

https://forums.openp...dules/?hl=modul

https://forums.openp...-questionsop62/

[bumperbee]

Yes it is working perfectly Master Zeros. Thanks very much

With this image, if there is an update, can I do the update by pressing the Menu button >Setup>Software update?

Best Regards

Edited by bumperbee, 8 August 2018 - 22:15.

[zeros]

Thanks for the confirmation. When you're done with your stuff, download under plugins Backusuite and make a fullbackup!. Right now I don't do updates, but the answer is yes.

Edited by zeros, 9 August 2018 - 04:26.

[moham96]

Mecool devices owners:

I just pushed an update to the repo, update and build a new image, you should now be able to scan and tune into channels(no picture yet)

some updates:

1- I solved the 64 bit issue thanks to crazycat69 help, so now enigma2 can function in 64 bit mode, hopefully we won't face any problem down the road.

2- Currently the tuner is working but you don't get picture, this is probably an issue with gstreamer and amlogic codecs.

3- You can do an automtic scan for channel but the tuner will lock after some time and will not find many channel and you have to reboot the device to get the tuner working again.

 

Regards

[engineerkhan15]

@moham96

Thanks for you dedication and efforts. I will build the test images in the afternoon and will upload by this evening.

Regards,

engineerkhan15

[ftp21_]

K1pro: http://www.mediafire...pro_sdcard.zip 

[sauna]

make for k1plus. I have Error 1.cleansed cleanup-build.sh.no helped.

 

 

http://www.mediafire...pile.14420/file

[guard77]

guard77, I was thinking about your problem. You said, that separately EMU and module work great. Have you tried from feed that plugin?
systemplugins-commoninterfaceassignment

Good day, Master zeros!
Thank you for your attention to my question. As for the plugin, first of all I pay attention to its presence, since it is impossible to work with the module without it. In your firmware it is already installed.

As for the topics you recommended. I looked through them. They are talking about VU + Duo and the simultaneous use of two CIs. I have a Solo 4K. For CI + work on OpenPLi 6.2 I use the plugin from here https://gisclub.tv/o...penpli-4-0/330/

Everything works fine (EMU and CI +), for which huge thanks to the author of the plugin.

I want to add that the same problem appeared on Open ATV 6.2 after several recent updates. Previously, everything was fine.