2740 replies to this topic

[atef]

Thank you Hains

atef@atef-ganm ~/openpli-oe-core $ MACHINE=spark make image
Building image for spark
Loading cache: 100% |##########################################################################################################################################################################################################| Time: 0:00:02
Loaded 3896 entries from dependency cache.
Parsing recipes: 100% |########################################################################################################################################################################################################| Time: 0:00:47
Parsing of 3333 .bb files complete (3046 cached, 287 parsed). 4183 targets, 968 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.34.0"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "linuxmint-18.3"
TARGET_SYS        = "sh4-oe-linux"
MACHINE           = "spark"
DISTRO            = "openpli"
DISTRO_VERSION    = "pli-extras"
TUNE_FEATURES     = "sh4"
meta-oe           
meta-filesystems  
meta-multimedia   
meta-networking   
meta-python       
meta-webserver    = "HEAD:dfbdd28d206a74bf264c2f7ee0f7b3e5af587796"
meta              = "HEAD:93dd2f9f3edf0584f9e806c629611d645dd72dbf"
meta-openpli      = "develop:73049f9f6f195a83bd8ae36e5fc001082dddb9ce"
meta-vuplus       = "HEAD:4e252b2a9e7ac2d0d30ea0c8c26a410f92f57a9d"
meta-xsarius.pli5 = "HEAD:e4dbdeda56e48eac79d595273cb6dac3b71a6b88"
meta-qviart       = "HEAD:225fced2acab42c16dd214e9e66808784ef54f30"
meta-xp           = "HEAD:b37b33a53422b822a89bea2ca1696ab72320674a"
meta-xtrend       = "HEAD:7943a562ef70d0bd96872fb68d4fafecf4f2d664"
meta-formuler     = "HEAD:e1d33c48edb119dcc3163855b0b1af510912ef52"
meta-gfutures     = "HEAD:dc85817308d6e140969b2736cb7d53d4bb46271a"
meta-xpeedc       = "HEAD:f12908a5573de8a6a06ad9f75081846a590511c4"
meta-zgemma       = "HEAD:58b3914fde09e6d0787e22c1c85d9aef92878f2d"
meta-edision      = "HEAD:20604f40c5866066fdd8518a57e2114e7517a2fe"
meta-miraclebox   = "HEAD:d44871d4d1f357d5b38488ed505b48fa8c8feff3"
meta-spycat       = "HEAD:a19f11bbcdcad969e9f6f8d2c30df0653427d4cb"
meta-gi           = "HEAD:01fd1e8256f53d40371e65514e13a53ef53e400d"
meta-sab          = "HEAD:92262feb14e4005c8096150daac7313e9cb3d85a"
meta-gigablue     = "HEAD:3fb1f863c14047a7ac38fc9f7e1f30c6e03fc908"
meta-amiko        = "HEAD:b6416ddfc6130265e0b3054d144b96b59fdf7a03"
meta-axasuhd      = "HEAD:dfc1465665f504fdc4d6fc9a401e630b04123211"
meta-local        = "develop:73049f9f6f195a83bd8ae36e5fc001082dddb9ce"
meta-qt5          = "HEAD:c6aa602d0640040b470ee81de39726276ddc0ea3"
meta-amlogic      = "HEAD:07b36433fb1efbe01a8f223baa13a1b1b7f97762"
meta-ax           = "HEAD:d05194b8f2794de8ca1f03851a7fde1400db8ffc"
meta-azbox        = "HEAD:04ffbdd0afc7da134fb620f9edb5c56eb1607a18"
meta-blackbox     = "HEAD:ef54a26c8be6fe135dad54deb7f1421dfc475fbc"
meta-broadmedia   = "HEAD:c2e7ba19cf2454211cfd5dcb87697f579e11cf37"
meta-ceryon       = "HEAD:72a7570c224d9ae76864f44e0b3f9944197eeb34"
meta-clap         = "HEAD:8a72e1befe26b979cc0f3f21a3bd7c75459ea856"
meta-cube         = "HEAD:36a80488ab79fc61ae7dd8fb05e9ecf4c011a299"
meta-dags         = "HEAD:976a406f8e1e18e56f813127f9a044388a7c8f67"
meta-dinobot      = "HEAD:2baf4ec5aacd3365351ea45455d02601d66836f2"
meta-dream        = "HEAD:51537f7d71ccee42d51938f13c6576e75769c765"
meta-ebox         = "HEAD:c171db6798e9d9a3c472ca1ce3878852022e1404"
meta-entwopia     = "HEAD:c43d8cb480fc2569995ba665810837580a6b30ba"
meta-fulan        = "HEAD:b4e15ba82d91b66d2c1b2070a585f88e59daf3c9"
meta-gb           = "HEAD:2e5acf294b78e208c71b7bfcc6a4ef536eef6784"
meta-hypercube    = "HEAD:aa135c99576a949d5f0c9ed2e289fec48f597781"
meta-ini          = "HEAD:8b33da9634aec53321f426cedd6d0f679f1972ab"
meta-ixuss        = "HEAD:850369eb5dd914410ac43e783c4147492f2af3b3"
meta-linkdroid    = "HEAD:397620d1bc765406dc039e9ba7174683aaef73c4"
meta-minix        = "HEAD:523180976e3eb73def124971c43d1f47e664b41e"
meta-octagon      = "HEAD:85939f987e87dfbfd21f8e0d63347400503e2147"
meta-odin         = "HEAD:61e888e1df903a77ad181ee02b960263322826a5"
meta-odroid       = "HEAD:839fd7cc211bc97ace3140942d3e9e29a0f6a745"
meta-protek       = "HEAD:c7e6f9640bbf9e8a0c9a2a15d1cc2c71c4806a05"
meta-raspberrypi  = "HEAD:6d3f4c55a2ff17a93561be13c2ba54d8d1f761c6"
meta-tiviar       = "HEAD:1eb5a8ebf58f6c09fbaee14d01ee77f63bc2f871"
meta-tripledot    = "HEAD:92207d30300c653249849fe761419f352480b938"
meta-uclan        = "HEAD:99f406e8c48405e134d6f7cd1e1ed1bfa7a1291c"
meta-wetek        = "HEAD:9243173dfd8508c675ca64fab3a14d074356b2ba"
meta-xcore        = "HEAD:de404ff2e713398067b734f184c198a3cf5f0a4a"
meta-xt           = "HEAD:d449885f319ae7f8f580db0c84a46eaed0f8c0b6"
pli-extras        = "develop:26125fc3e9a017da7a1cd64ef2190199fd03ef91"

Initialising tasks: 100% |#####################################################################################################################################################################################################| Time: 0:00:53
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 6266 tasks of which 6241 didn't need to be rerun and all succeeded.
atef@atef-ganm ~/openpli-oe-core $ 

[zeros]

New drivers for dm900 and dm920, feed updated and online update should work.
Thanks all involved!

[Persian Prince]

New RPi images on http://www.mediafire...q4d9/pli-extras

 

- kernel 4.14.84 with latest boot files

- omxplayer with ffmpeg 4.x

- userland upgraded to 20181120

- e2-rpihddevice updated

- lots of enigma2 updates regarding RPi devices thanks to milaebrothers and Hains: https://github.com/P...commits/develop

 

[Persian Prince]

New test images on http://www.mediafire...q4d9/pli-extras

 

- spark

- spark7162

 

[dreamce]

Master-Persian Prince thanks

Spark 7111 build 1.12.2018 there are problems

Tuner menu does not appear

Video settings menu does not appear

[dreamce]

Master-Persian Prince

Spark Openpli-7.0 Build,is it possible,if you are, please write

[Persian Prince]

Try new test images which I just uploaded again

[ndminion]

Persian Prince, I want make build for azboxhd and received many error. Please, can you collect in the near future?

[dreamce]

Try new test images which I just uploaded again

the problem has improved, thanks

[fairbird]

@zeros and others 

 

WE Add kodi recipes to (DM820, 7080 and 900/920)

https://github.com/P...81976c8217f122f

 

Please build it and feedback ..

 

on my side built to DM920 ... ok

Edited by fairbird, 2 December 2018 - 18:17.

[Persian Prince]

@zeros and others

WE Add kodi recipes to (DM820, 7080 and 900/920)
https://github.com/P...81976c8217f122f

Please build it and feedback ..

on my side built to DM920 ... ok

Sorry but I will revert them all soon ...

I'm against it as at some point Kodi related things are going to fuck up pli-extras, it's not going to compile or we need to update so many things bla bla same shit all over again.

Kodi related recipes should not be maintained in main metas in my opinion and should be optional as it will ruin my builds some day and I simply don't like it.

[zeros]

Thanks, I'd like to try it, but I ll do it with my another private server. I will let you know when the results are ready.

[poiex]

Hi I'm trying to compile image for my dm800se but so far i got the following errors please can someone help what to do.

I'm using ubuntu 18.04.1

 

openpli@jr-ESPRIMO-Mobile-D9510:~/openpli/openpli-oe-core/build$ MACHINE=dm800se bitbake openpli-enigma2.image

Traceback (most recent call last):
  File "/home/openpli/openpli/openpli-oe-core/bitbake/bin/bitbake", line 31, in <module>
    import bb
  File "/home/openpli/openpli/openpli-oe-core/bitbake/lib/bb/__init__.py", line 79, in <module>
    from bb import fetch2 as fetch
  File "/home/openpli/openpli/openpli-oe-core/bitbake/lib/bb/fetch2/__init__.py", line 1819, in <module>
    from . import clearcase
  File "/home/openpli/openpli/openpli-oe-core/bitbake/lib/bb/fetch2/clearcase.py", line 72, in <module>
    from   distutils import spawn
ImportError: cannot import name 'spawn'
 

[DrData]

 

New RPi images on http://www.mediafire...q4d9/pli-extras

 

- kernel 4.14.84 with latest boot files

- omxplayer with ffmpeg 4.x

- userland upgraded to 20181120

- e2-rpihddevice updated

- lots of enigma2 updates regarding RPi devices thanks to milaebrothers and Hains: https://github.com/P...commits/develop

 

 

 

 

I try the Image for Raspberry Pi 3. I connected lan wire and a USB-Keyboard. On first boot E2 crashes. On second boot I see spinner forever.

I have attached E2 crashlog.

Attached Files

•  enigma2_crash.log   19.68KB   4 downloads

[Guiekalle]

Dear All,

 

 

I am planning to prepare my Megasat IQON Force 2 with an unofficial openpli.

 

Therefore I downloaded openpli-enigma2-pli-extras-force2_usb.zip from pli-extras.

 

While am a beginner in this issue, I need your support.

 

By extracting the zip-folder I find an update folder.

 

What is needed to get the openpli on my receiver ?

 

Prepare extracted folder name and files with correct names and flash data in a standard way by USB stick to receiver ?

 

Now I am in a state of helplessness. How can I a reach my target to run openpli at my Megasat IQON Force 2 ?

 

Thanks so much for your support.

 

best regards 

[rantanplan]

What have you done with the box so far?

Flashing is now on e2 a basis.

2 ways are possible

1. unpack the zip file and flash the folder on the USB stick, then via USB stick.

2. Use Onlineflash / ofgwrite

As far as an IMage with the possibility on it is the Zip file at Onlineflash-local and best in your case without any backups set up again.

[jrg777]

 

 

New RPi images on http://www.mediafire...q4d9/pli-extras

 

- kernel 4.14.84 with latest boot files

- omxplayer with ffmpeg 4.x

- userland upgraded to 20181120

- e2-rpihddevice updated

- lots of enigma2 updates regarding RPi devices thanks to milaebrothers and Hains: https://github.com/P...commits/develop

 

 

 

 

I try the Image for Raspberry Pi 3. I connected lan wire and a USB-Keyboard. On first boot E2 crashes. On second boot I see spinner forever.

I have attached E2 crashlog.

 

same here, i'm trying to get raspberry with fallback tuner in the previously versions but i ve had no luck so far

[wu-li]

octagon1008.tar.gz
Image - 05.11.2018

DISPLAY:

MAXI BOOT
FLASH    
USB I
BOOTING
SH4

 

does not load

hypertrm:

 

*

Board: STb7200-HDBOX  [29-bit mode]

U-Boot 1.3.1 (Apr 28 2010 - 14:35:18) - stm23-0032
---created by TDT for general purpose---

DRAM:  128 MB
Flash:   32 MB
In:    serial
Out:   serial
Err:   serial
init Frontpanel... done, AV700
Hit any key to stop autoboot:  0
bootmenu_timeout:2000,default:0
add entry:0 - FLASH
add entry:1 - USB I
add entry:2 - USB II
add entry:3 - USB III
add entry:4 - USB IV
add entry:5 - empty
add entry:6 - empty
add entry:7 - empty
add entry:8 - empty
add entry:9 - E FLASH
entering bootmenu - default:0 - FLASH
selected: USB I
selected: USB I
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
loading from usb 0:1

1964824 bytes read
## Booting image at a5000000 ...
   Image Name:   Linux-2.6.32.71_stm24_0217
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1964760 Bytes =  1.9 MB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS1,115200 root=/dev/sda1 rw mem=128m ip=192.168.-.-
5:192.168.-.-:192.168.-.-:255.255.255.0:AT700:eth0:off coprocessor_mem=4m@0x10
000000,4m@0x10400000 rootdelay=5 nwhwconf=device:eth0,hwaddr:00:-:-:-:-:- i
nit=/bin/devinit - 0x00000000 - 0 ...

copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
INIT: version 2.88 booting
modprobe: FATAL: Module fuse not found in directory /lib/modules/2.6.32.71_stm24
_0217
Loading fuse module failed!
sh: sda1: unknown operand
/etc/init.d/rc: /etc/rcS.d/S05modutils.sh: line 1: can't create /dev/dbox/oled0:
nonexistent directory
/etc/init.d/rc: /etc/rcS.d/S05modutils.sh: line 55: can't create /proc/sys/kerne
l/printk: nonexistent directory
Setting up swapspace version 1, size = 16773120 bytes
UUID=c5cfb3ff-a827-44b7-898a-05dcbc4acbfb
grep: /etc/enigma2/settings: No such file or directory
/dev/dvb/adapter0/video0: No such file or directory
dmesg: klogctl: Function not implemented
ALSA: Restoring mixer settings...
No state is present for card STx7109
Found hardware: "STx7109" "" "" "" ""
Hardware is initialized using a generic method
No state is present for card STx7109
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.dirty_ratio = 60
INIT: Entering runlevel: 3
Configuring network interfaces... ip: RTNETLINK answers: File exists
udhcpc: option -h NAME is deprecated, use -x hostname:NAME
udhcpc (v1.24.1) started
Sending discover...
Sending select for 192.168.-.-...
Lease of 192.168.-.- obtained, lease time 268435455
/etc/udhcpc.d/50default: Adding DNS -.-.-.-
/etc/udhcpc.d/50default: Adding DNS -.-.-.-
ip: SIOCGIFFLAGS: No such device
Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Starting rpcbind daemon...rpcbind: fork failed: No such device
done.
Mounting remote filesystems...
starting statd: done
Starting internet superserver: inetd.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
/dev/dvb/adapter0/video0: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 26, in <module>
    from Screens import InfoBar
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 17, in <module>
  File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>

  File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 33, in <modul
e>
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 117, in <module>
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 107, in __init__
IOError: [Errno 2] No such file or directory: '/etc/lircd.conf'
killall: enigma2: no process killed
/dev/dvb/adapter0/video0: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:

...

IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 26, in <module>
    from Screens import InfoBar
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 17, in <module>
  File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>

  File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 33, in <modul
e>
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 117, in <module>
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 107, in __init__
IOError: [Errno 2] No such file or directory: '/etc/lircd.conf'
killall: enigma2: no process killed
/dev/dvb/adapter0/video0: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:

...

[Persian Prince]

When there is no new development regarding other sh4 models and no other sh4 developer helps us why do you expect anything new?

[ledtou]

When there is no new development regarding other sh4 models and no other sh4 developer helps us why do you expect anything new?

hello Persian

Any news about mecool KIII PRO s912