Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #2121 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 14 August 2018 - 06:13

 

I have this:

config.usage.alternatives_priority=5

in /etc/enigma2/settings for my Zgemma H9  :)

Doesn't help, does the Zgemma H9 have a multimode tuner ? what is the content of /proc/bus/nim_sockets?

 

 

It's a hybrid dvb-t/c tuner:

root@h9:~# cat /proc/bus/nim_sockets
NIM Socket 0:
        Type: DVB-T2
        Name: Si2168
        Has_Outputs: yes
        Frontend_Device: 0
        I2C_Device: 0
        Supports_Blind_Scan: yes

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2122 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 14 August 2018 - 08:08

New test images for mecool devices, changes are about:
 
- dvb (kernel updates)
- wlan (now includes all wifi firmwares)
- bluetooth (now includes all bt firmwares but I'm not sure about kernel modules and defconfigs)
- resolution (50hz added and it's 1080p50hz/bpp=24 now, if you still have problem try to use 720p/bpp=32 instead)
 
 
 
 
 

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2123 mihaip

  • Senior Member
  • 42 posts

0
Neutral

Posted 14 August 2018 - 08:34

@jserv --- very funny ! the question was for KIII ...



Re: Howto build unofficial pli for your unsupported receiver #2124 ledtou

  • Member
  • 18 posts

0
Neutral

Posted 14 August 2018 - 08:53

 

New test images for mecool devices, changes are about:
 
- dvb (kernel updates)
- wlan (now includes all wifi firmwares)
- bluetooth (now includes all bt firmwares but I'm not sure about kernel modules and defconfigs)
- resolution (50hz added and it's 1080p50hz/bpp=24 now, if you still have problem try to use 720p/bpp=32 instead)
 
 
 
 
 

 

K3Pro still black screen in boot after message ( please wait: booting ... )



Re: Howto build unofficial pli for your unsupported receiver #2125 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 14 August 2018 - 10:15

 

 

New test images for mecool devices, changes are about:
 
- dvb (kernel updates)
- wlan (now includes all wifi firmwares)
- bluetooth (now includes all bt firmwares but I'm not sure about kernel modules and defconfigs)
- resolution (50hz added and it's 1080p50hz/bpp=24 now, if you still have problem try to use 720p/bpp=32 instead)
 
 
 
 
 

 

K3Pro still black screen in boot after message ( please wait: booting ... )

 

This means the device successfully booted but for some reason enigma2 has not started



Re: Howto build unofficial pli for your unsupported receiver #2126 takitr

  • Senior Member
  • 77 posts

+24
Neutral

Posted 14 August 2018 - 11:22

K3 pro has mali t830 GPU. Have to be add package libhybrit and t820 OpenGL driver
https://github.com/L...engl-meson-t82x
https://github.com/L...kages/libhybris

Re: Howto build unofficial pli for your unsupported receiver #2127 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 11:55

 

 

 

New test images for mecool devices, changes are about:
 
- dvb (kernel updates)
- wlan (now includes all wifi firmwares)
- bluetooth (now includes all bt firmwares but I'm not sure about kernel modules and defconfigs)
- resolution (50hz added and it's 1080p50hz/bpp=24 now, if you still have problem try to use 720p/bpp=32 instead)
 
 
 
 
 

 

K3Pro still black screen in boot after message ( please wait: booting ... )

 

This means the device successfully booted but for some reason enigma2 has not started

 

 

here, K1 pro enigma2 working fine... but not full screen

 

Thanks


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2128 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 11:57

Last image, screenshot working fine. :)

 

Attached File  screenshot_20150101010403.jpg   119.83KB   5 downloads


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2129 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 11:59

I'll test today too my k2 pro (v1) and K3 pro to see some features...


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2130 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 12:02

 

New test images for mecool devices, changes are about:
 
- dvb (kernel updates)
- wlan (now includes all wifi firmwares)
- bluetooth (now includes all bt firmwares but I'm not sure about kernel modules and defconfigs)
- resolution (50hz added and it's 1080p50hz/bpp=24 now, if you still have problem try to use 720p/bpp=32 instead)
 
 
 
 
 

 

 

Attached File  k1 pro last image.png   11.62KB   4 downloads


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2131 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 12:25

 

 

 

 

New test images for mecool devices, changes are about:
 
- dvb (kernel updates)
- wlan (now includes all wifi firmwares)
- bluetooth (now includes all bt firmwares but I'm not sure about kernel modules and defconfigs)
- resolution (50hz added and it's 1080p50hz/bpp=24 now, if you still have problem try to use 720p/bpp=32 instead)
 
 
 
 
 

 

K3Pro still black screen in boot after message ( please wait: booting ... )

 

This means the device successfully booted but for some reason enigma2 has not started

 

 

here, K1 pro enigma2 working fine... but not full screen

 

Thanks

 

 

Sorry.. not fine, restarting/stop all functions... I don't know if after choosing skin full night hd, tests with searching channels or setup lan/wlan


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2132 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 14 August 2018 - 12:25

Did you test 720p50hz?


Edited by Persian Prince, 14 August 2018 - 12:26.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2133 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 12:41

Did you test 720p50hz?

 

Yes... but not appear full screen, only if change full night hd skin

 

Using webif to screenshot, I see full screen, but my Samsung TV, only part of screen

 

Attached File  screenshot_20150101010904.jpg   90.76KB   4 downloads

 

Overscan wizard (test 720p 50)

 

Attached File  screenshot_20150101011349.jpg   297.68KB   4 downloads

 

Some tests with network:

 

Only lan3 working

 

Attached File  screenshot_20150101010711.jpg   106.71KB   4 downloads

 

Attached File  screenshot_20150101010739.jpg   75.72KB   4 downloads

 

Wlan not found networks

 

Attached File  screenshot_20150101010840.jpg   44.63KB   4 downloads

 

After factory reset, receiver working fine, not restarting/black screen. I don't know if after choosing full night hd or changing setup lan/wlan.


Edited by frankviana, 14 August 2018 - 12:44.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2134 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 12:52

I don't see my 2 HDD usb, but dmesg show connected:

 

Attached File  screenshot_20150101012108.jpg   66.83KB   4 downloads

 

root@k1pro:~# dmesg | grep usb

[    0.955486@0] usbcore: registered new interface driver usbfs
[    0.958708@0] usbcore: registered new interface driver hub
[    0.964293@0] usbcore: registered new device driver usb
[    2.370055@2] usbcore: registered new interface driver brcmfmac
[    2.401096@2] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80001dc000
[    2.412408@2] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
[    2.417089@2] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80001de080
[    2.434054@2] usbcore: registered new interface driver synaptics_usb
[    2.507785@0] usbcore: registered new interface driver usbhid
[    2.514382@0] usbhid: USB HID core driver
[    2.575249@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[    2.582546@0] dwc_otg_driver_probe host only, not probe usb_otg!!!
[    5.257665@3] usbcore: registered new interface driver snd-usb-audio
[    5.263634@3] usbcore: registered new interface driver snd-ua101
[    5.270460@3] usbcore: registered new interface driver snd-usb-caiaq
[    5.275502@3] usbcore: registered new interface driver snd-usb-6fire
[    5.285471@3] usbcore: registered new interface driver snd-usb-hiface
[    6.531049@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.537791@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1


[    6.545153@2] usb usb1: Product: xHCI Host Controller
[    6.550148@2] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
[    6.555729@2] usb usb1: SerialNumber: xhci-hcd.0.auto
[    6.582251@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    6.589023@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.596362@2] usb usb2: Product: xHCI Host Controller
[    6.601363@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
[    6.606962@2] usb usb2: SerialNumber: xhci-hcd.0.auto
[    6.960112@2] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    7.102146@2] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    7.102152@2] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.102155@2] usb 1-1: Product: USB2.0 Hub
[ 1205.730123@2] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[ 1205.871360@2] usb 1-2: New USB device found, idVendor=0480, idProduct=a006
[ 1205.872602@2] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1205.879842@2] usb 1-2: Product: External USB 3.0
[ 1205.885051@2] usb 1-2: Manufacturer: Toshiba
[ 1205.888643@2] usb 1-2: SerialNumber: 2011121310319
[ 1205.895563@2] usb 1-2: ep 0x81 - rounding interval to 16 microframes, ep desc says 20 microframes
[ 1205.902794@2] usb 1-2: ep 0x2 - rounding interval to 16 microframes, ep desc says 20 microframes
[ 1226.920460@0] usb 1-1.3: new high-speed USB device number 4 using xhci-hcd
[ 1227.020998@3] usb 1-1.3: New USB device found, idVendor=14cd, idProduct=6116
[ 1227.022413@3] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 1227.029826@3] usb 1-1.3: Product: USB Mass Storage Device
[ 1227.035217@3] usb 1-1.3: Manufacturer: Generic     
[ 1227.040004@3] usb 1-1.3: SerialNumber: 116AC2101219
root@k1pro:~#


Edited by frankviana, 14 August 2018 - 12:54.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2135 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 12:59

I don't see my 2 HDD usb, but dmesg show connected:

 

attachicon.gifscreenshot_20150101012108.jpg

 

root@k1pro:~# dmesg | grep usb

[    0.955486@0] usbcore: registered new interface driver usbfs
[    0.958708@0] usbcore: registered new interface driver hub
[    0.964293@0] usbcore: registered new device driver usb
[    2.370055@2] usbcore: registered new interface driver brcmfmac
[    2.401096@2] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80001dc000
[    2.412408@2] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
[    2.417089@2] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80001de080
[    2.434054@2] usbcore: registered new interface driver synaptics_usb
[    2.507785@0] usbcore: registered new interface driver usbhid
[    2.514382@0] usbhid: USB HID core driver
[    2.575249@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[    2.582546@0] dwc_otg_driver_probe host only, not probe usb_otg!!!
[    5.257665@3] usbcore: registered new interface driver snd-usb-audio
[    5.263634@3] usbcore: registered new interface driver snd-ua101
[    5.270460@3] usbcore: registered new interface driver snd-usb-caiaq
[    5.275502@3] usbcore: registered new interface driver snd-usb-6fire
[    5.285471@3] usbcore: registered new interface driver snd-usb-hiface
[    6.531049@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.537791@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1


[    6.545153@2] usb usb1: Product: xHCI Host Controller
[    6.550148@2] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
[    6.555729@2] usb usb1: SerialNumber: xhci-hcd.0.auto
[    6.582251@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    6.589023@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.596362@2] usb usb2: Product: xHCI Host Controller
[    6.601363@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
[    6.606962@2] usb usb2: SerialNumber: xhci-hcd.0.auto
[    6.960112@2] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    7.102146@2] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    7.102152@2] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.102155@2] usb 1-1: Product: USB2.0 Hub
[ 1205.730123@2] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[ 1205.871360@2] usb 1-2: New USB device found, idVendor=0480, idProduct=a006
[ 1205.872602@2] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1205.879842@2] usb 1-2: Product: External USB 3.0
[ 1205.885051@2] usb 1-2: Manufacturer: Toshiba
[ 1205.888643@2] usb 1-2: SerialNumber: 2011121310319
[ 1205.895563@2] usb 1-2: ep 0x81 - rounding interval to 16 microframes, ep desc says 20 microframes
[ 1205.902794@2] usb 1-2: ep 0x2 - rounding interval to 16 microframes, ep desc says 20 microframes
[ 1226.920460@0] usb 1-1.3: new high-speed USB device number 4 using xhci-hcd
[ 1227.020998@3] usb 1-1.3: New USB device found, idVendor=14cd, idProduct=6116
[ 1227.022413@3] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 1227.029826@3] usb 1-1.3: Product: USB Mass Storage Device
[ 1227.035217@3] usb 1-1.3: Manufacturer: Generic     
[ 1227.040004@3] usb 1-1.3: SerialNumber: 116AC2101219
root@k1pro:~#

 

OpenAtv and Pure2 (alien5) show my 2 hdd usb and play video, but audio only 5 seconds.

 

Vu zero 4k too show:

 

Attached File  vu zero 4k media.png   169.24KB   4 downloads

 

Attached File  screenshot_20180814085714.jpg   91.11KB   4 downloads


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2136 jserv

  • Senior Member
  • 30 posts

0
Neutral

Posted 14 August 2018 - 13:01

@jserv --- very funny ! the question was for KIII ...

i think you don't have k2



Re: Howto build unofficial pli for your unsupported receiver #2137 dsmi

  • Member
  • 12 posts

0
Neutral

Posted 14 August 2018 - 13:05

another spin of trying to build an image for spark7162 fails on 'No rule to make target openpli-oe-core/build/tmp/work-shared/spark7162/kernel-source/multicom/mme/mme_linux_user.c

Any suggestion how to fix this appreciated



NOTE: Running task 5706 of 6065 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/extra/libmme-host_git.bb:do_configure)
NOTE: recipe libmme-host-2.1+gitAUTOINC+cd23474d1b-r0: task do_configure: Started
NOTE: recipe libmme-host-2.1+gitAUTOINC+cd23474d1b-r0: task do_configure: Succeeded
NOTE: Running task 5707 of 6065 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/extra/libmme-host_git.bb:do_compile)
NOTE: recipe libmme-host-2.1+gitAUTOINC+cd23474d1b-r0: task do_compile: Started
ERROR: libmme-host-2.1+gitAUTOINC+cd23474d1b-r0 do_compile: oe_runmake failed
ERROR: libmme-host-2.1+gitAUTOINC+cd23474d1b-r0 do_compile: Function failed: do_compile (log file is located at /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/temp/log.do_compile.31551)
ERROR: Logfile of failure stored in: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/temp/log.do_compile.31551
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'sh-common', 'common-linux', 'common-glibc', 'sh4-linux', 'common']
| DEBUG: Executing shell function do_compile
| NOTE: make -j 2 DRIVER_TOPDIR=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work-shared/spark7162/kernel-source DESTDIR=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/image SUBDIRS=libmme_host
| ERROR: oe_runmake failed
| Making all in libmme_host
| make[1]: Entering directory '/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/git/tools/libmme_host'
| make[1]: *** No rule to make target '/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work-shared/spark7162/kernel-source/multicom/mme/mme_linux_user.c', needed by '/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work-shared/spark7162/kernel-source/multicom/mme/mme_linux_user.lo'.  Stop.
| make[1]: Leaving directory '/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/git/tools/libmme_host'
| Makefile:388: recipe for target 'all-recursive' failed
| make: *** [all-recursive] Error 1
| WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/temp/run.do_compile.31551:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libmme-host/2.1+gitAUTOINC+cd23474d1b-r0/temp/log.do_compile.31551)
NOTE: recipe libmme-host-2.1+gitAUTOINC+cd23474d1b-r0: task do_compile: Failed
ERROR: Task (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/extra/libmme-host_git.bb:do_compile) failed with exit code '1'
NOTE: recipe mt7610u-3.0.0.2-r0: task do_compile: Succeeded
NOTE: Tasks Summary: Attempted 5708 tasks of which 4468 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/extra/libmme-host_git.bb:do_compile
Summary: There were 2 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.



Build Configuration:
BB_VERSION        = "1.34.0"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "linuxmint-18.2"
TARGET_SYS        = "sh4-oe-linux"
MACHINE           = "spark7162"
DISTRO            = "openpli"
DISTRO_VERSION    = "pli-extras"
TUNE_FEATURES     = "sh4"


Edited by dsmi, 14 August 2018 - 13:06.


Re: Howto build unofficial pli for your unsupported receiver #2138 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 14 August 2018 - 13:09

How to install this for mecool?

 

opkg install kernel-module-smsdvb kernel-module-smsmdtv kernel-module-smssdio kernel-module-smsusb \
enigma2
-plugin-drivers-dvb-usb-siano firmware-dvb-siano

 

root@k1pro:~# opkg update

Downloading http://downloads.ope...rty/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.ope...pro/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://pe4k/feeds/op...h64/Packages.gz.
wget: bad address 'pe4k'
Downloading http://pe4k/feeds/op...all/Packages.gz.
wget: bad address 'pe4k'
Downloading http://pe4k/feeds/op...pro/Packages.gz.
wget: bad address 'pe4k'

Collected errors:
 * opkg_download_backend: Failed to download http://downloads.ope...pro/Packages.gz, wget returned 1.
 * opkg_download_backend: Failed to download http://pe4k/feeds/op...h64/Packages.gz, wget returned 1.
 * opkg_download_backend: Failed to download http://pe4k/feeds/op...all/Packages.gz, wget returned 1.
 * opkg_download_backend: Failed to download http://pe4k/feeds/op...pro/Packages.gz, wget returned 1.

root@k1pro:~# opkg install kernel-module-smsdvb kernel-module-smsmdtv kernel-module-smssdio kernel-module-smsusb \

> enigma2-plugin-drivers-dvb-usb-siano firmware-dvb-siano

Collected errors:

 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'kernel-module-smsdvb'.

 

I need some tests with my usb ISDBT tuner MyGica s270


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2139 ledtou

  • Member
  • 18 posts

0
Neutral

Posted 14 August 2018 - 13:19

I'll test today too my k2 pro (v1) and K3 pro to see some features...

If you can test image k3 pro work or not.



Re: Howto build unofficial pli for your unsupported receiver #2140 ledtou

  • Member
  • 18 posts

0
Neutral

Posted 14 August 2018 - 13:19

K3 pro has mali t830 GPU. Have to be add package libhybrit and t820 OpenGL driver
https://github.com/L...engl-meson-t82x
https://github.com/L...kages/libhybris

thanks, how to add this files pls.




4 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users


    Bing (1)