With BA you can't do online update, it's for sure.
Did you tried before also with BA?
Edited by zeros, 5 April 2018 - 17:33.
Posted 5 April 2018 - 17:31
With BA you can't do online update, it's for sure.
Did you tried before also with BA?
Edited by zeros, 5 April 2018 - 17:33.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 5 April 2018 - 18:11
to MasterG and Persian Prince ... as this unoficial opli could you please make a liitle change like i already mentioned it in this topic : https://forums.openpli.org/topic/57230-i-recommend-you-this-change-in-epgcache-very-important/
its about to make a update for epgcache in short time instead of 60min which is the default value ...
Posted 6 April 2018 - 08:08
But the question remains, why some users have problem with FTP and others don't.
In meta-dream we have just a bbappend to inherit upx_compress for small flash boxes.
Nothing more.
I checked it on the build server dm900/dm920 to be sure.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Posted 6 April 2018 - 09:15
I believe UPX doesn't do anything for arm right?
https://github.com/P...ress.bbclass#L6
Unless for those dreambox receivers the ${TARGET_ARCH} has some other value I guess.
In that case binaries do get compressed which causes problems on arm hardware (segfaults).
On mips there shouldn't be any problems.
You can try to run vsftpd by hand and see if it runs normally.
Posted 6 April 2018 - 09:41
In dreambox-arm.inc
TARGET_ARCH = "arm" DEFAULTTUNE = "cortexa15hf-neon-vfpv4" OLDEST_KERNEL = "3.14"
But i deleted the bbappend on server anyway.
oe-core and meta-dream updated as well.
So we can test this with new image.
Edited by Beeker, 6 April 2018 - 09:41.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Posted 6 April 2018 - 09:57
As to FTP (also applies to Telnet):
By default, an OpenPLi image has no password for the user "root".
No password is different from a blank password. You notice that when you use a linux commandline client, you do not get a password prompt, you are directly logged in. If however you use some sort of GUI or other tool, and that tool prompts you for username and password before attempting to login, you can't use that tool until you've set a password on the box.
Same applies for ssh, that also requires you to set a password before you can use it.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 April 2018 - 10:45
Edited by zeros, 6 April 2018 - 10:46.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 6 April 2018 - 10:56
Permissions are not related to the password. Everything runs as root on the box, and root has access to everything.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 April 2018 - 11:11
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 6 April 2018 - 11:30
Then something else is wrong, as the two are absolutely NOT related.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 April 2018 - 11:30
Facing this issue while compiling for Wetek Play2, any suggestion please:
ERROR: linux-wetek2-3.14.29-r0 do_compile: oe_runmake failed ERROR: linux-wetek2-3.14.29-r0 do_compile: Function failed: do_compile (log file is located at /home/tahir/openpli-oe-core/build/tmp/work/wetekplay2-oe-linux/linux-wetek2/3.14.29-r0/temp/log.do_compile.10512) ERROR: Logfile of failure stored in: /home/tahir/openpli-oe-core/build/tmp/work/wetekplay2-oe-linux/linux-wetek2/3.14.29-r0/temp/log.do_compile.10512 Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j 4 HOSTCC=gcc HOSTCPP=gcc -E gxbb_p200_2G_wetek_play_2.dtb | ERROR: oe_runmake failed | KBUILD_CFLAGS_MODULE:-DMODULE | make[2]: aarch64-oe-linux-gcc: Command not found | CC scripts/mod/devicetable-offsets.s | /bin/sh: aarch64-oe-linux-gcc: command not found | /home/tahir/openpli-oe-core/build/tmp/work-shared/wetekplay2/kernel-source/scripts/Makefile.build:204: recipe for target 'scripts/mod/devicetable-offsets.s' failed | make[4]: *** [scripts/mod/devicetable-offsets.s] Error 127 | make[4]: *** Waiting for unfinished jobs.... | CC scripts/mod/empty.o | /bin/sh: aarch64-oe-linux-gcc: command not found | HOSTCC scripts/mod/mk_elfconfig | /home/tahir/openpli-oe-core/build/tmp/work-shared/wetekplay2/kernel-source/scripts/Makefile.build:308: recipe for target 'scripts/mod/empty.o' failed | make[4]: *** [scripts/mod/empty.o] Error 127 | /home/tahir/openpli-oe-core/build/tmp/work-shared/wetekplay2/kernel-source/scripts/Makefile.build:455: recipe for target 'scripts/mod' failed | make[3]: *** [scripts/mod] Error 2 | /home/tahir/openpli-oe-core/build/tmp/work-shared/wetekplay2/kernel-source/Makefile:538: recipe for target 'scripts' failed | make[2]: *** [scripts] Error 2 | Makefile:133: recipe for target 'sub-make' failed | make[1]: *** [sub-make] Error 2 | Makefile:26: recipe for target 'all' failed | make: *** [all] Error 2 | ERROR: Function failed: do_compile (log file is located at /home/tahir/openpli-oe-core/build/tmp/work/wetekplay2-oe-linux/linux-wetek2/3.14.29-r0/temp/log.do_compile.10512) ERROR: Task (/home/tahir/openpli-oe-core/pli-extras/meta-amlogic/recipes-bsp/linux/linux-wetek2_3.14.29.bb:do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 2858 tasks of which 2854 didn't need to be rerun and 1 failed. Summary: 1 task failed: /home/tahir/openpli-oe-core/pli-extras/meta-amlogic/recipes-bsp/linux/linux-wetek2_3.14.29.bb:do_compile Summary: There were 4 WARNING messages shown. Summary: There were 2 ERROR messages shown, returning a non-zero exit code. Makefile:125: recipe for target 'image' failed make: *** [image] Error 1
Posted 6 April 2018 - 15:34
Any news too for KI Pro (s905D), Old KII Pro (s905) and KIII Pro (s912)?
Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter, PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)
Posted 6 April 2018 - 17:55
Open Vision sources: https://github.com/OpenVisionE2
0 members, 0 guests, 0 anonymous users