Howto build unofficial pli for your unsupported receiver
Re: Howto build unofficial pli for your unsupported receiver #781
Re: Howto build unofficial pli for your unsupported receiver #782
Posted 28 April 2018 - 22:29
Greetings,
First of all thank you very much for your valuable work.
I test the image on WP2, my first impressions are very positive.
Scan: OK.
Resolution 4K: OK.
Remote Control functions: OK.
SD, HD and 4K Channels: OK.
Image Quality: It's fine with me.
But there was no Internet connection and I think that IPTV did not work.
Note: If you do not hear sound on the 4K channel, change the sound system on the Android system. Sound will come.
Finally, I strongly recommend this work to the Mecool K1 Pro.
Best regards...
Edited by ozkaradag, 28 April 2018 - 22:30.
Re: Howto build unofficial pli for your unsupported receiver #783
Posted 29 April 2018 - 04:05
But there was no Internet connection and I think that IPTV did not work.
Note: If you do not hear sound on the 4K channel, change the sound system on the Android system. Sound will come.
lan connection working fine but i did not check wifi..u must be pointing wifi issue?
how to change sound system in android ?
Re: Howto build unofficial pli for your unsupported receiver #784
Re: Howto build unofficial pli for your unsupported receiver #785
Re: Howto build unofficial pli for your unsupported receiver #786
Posted 29 April 2018 - 11:16
But there was no Internet connection and I think that IPTV did not work.
Note: If you do not hear sound on the 4K channel, change the sound system on the Android system. Sound will come.
lan connection working fine but i did not check wifi..u must be pointing wifi issue?
how to change sound system in android ?
Greetings,
Switch to Android system > Go to Audio Settings > Switch the audio source from Analog to HDMI > and switch to Enigma2.
There is a network connection but it does not go to the Internet or connect to the Internet.
Best regards...
Re: Howto build unofficial pli for your unsupported receiver #787
Re: Howto build unofficial pli for your unsupported receiver #788
Re: Howto build unofficial pli for your unsupported receiver #789
Re: Howto build unofficial pli for your unsupported receiver #790
Re: Howto build unofficial pli for your unsupported receiver #791
Posted 29 April 2018 - 22:00
How can I install kodi on ATV?
Ask ATV? On their forum?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Howto build unofficial pli for your unsupported receiver #792
Posted 29 April 2018 - 22:17
Hi! How to properly configure openpli metas for building an image for 800se for 2.6.18 drivers/kernel?
Tried to set PREFERRED_VERSION_linux-dreambox = "2.6.18"
but when trying to compile it says:
Re: Howto build unofficial pli for your unsupported receiver #793
Posted 29 April 2018 - 22:44
Update: edited /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox_2.6.18.bb - included dm800se as compatible and edited /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox_3.2.bb - ecxluded dm800se as compatible and now got:
ERROR: linux-dreambox-2.6.18-r7.4 do_fetch: Fetcher failure: Unable to find file file://defconfig anywhere. The paths that were searched were: /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/openpli /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/openpli /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/openpli /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/dreambox /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/dreambox /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/dreambox /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/dm800se /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/dm800se /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/dm800se /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/mipsarcho32el /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/mipsarcho32el /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/mipsarcho32el /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/mipsarcho32 /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/mipsarcho32 /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/mipsarcho32 /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/mipsarchel /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/mipsarchel /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/mipsarchel /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/mipsarch /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/mipsarch /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/mipsarch /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/mipsel /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/mipsel /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/mipsel /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox-2.6.18/ /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox/ /root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/files/ /root/openpli-oe-core/sources ERROR: linux-dreambox-2.6.18-r7.4 do_fetch: Fetcher failure for URL: 'file://defconfig'. Unable to fetch URL from any source. ERROR: linux-dreambox-2.6.18-r7.4 do_fetch: Function failed: base_do_fetch ERROR: Logfile of failure stored in: /root/openpli-oe-core/build/tmp/work/dm800se-oe-linux/linux-dreambox/2.6.18-r7.4/temp/log.do_fetch.18485 ERROR: Task (/root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox_2.6.18.bb:do_fetch) failed with exit code '1' NOTE: Tasks Summary: Attempted 2277 tasks of which 2226 didn't need to be rerun and 1 failed.
Re: Howto build unofficial pli for your unsupported receiver #794
Posted 29 April 2018 - 23:20
Hi! How to properly configure openpli metas for building an image for 800se for 2.6.18 drivers/kernel?
Tried to set PREFERRED_VERSION_linux-dreambox = "2.6.18"
but when trying to compile it says:
ERROR: Multiple versions of linux-dreambox are due to be built
(/root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox_2.6.18.bb
/root/openpli-oe-core/pli-extras/meta-dream/recipes-bsp/linux/linux-dreambox_3.2.bb).
Only one version of a given PN should be built in any given build.
You likely need to set PREFERRED_VERSION_linux-dreambox to select the correct version or don't depend on multiple versions.
Why?! Do you want to support a clone? Here?
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #795
Posted 30 April 2018 - 00:30
Why?! Do you want to support a clone? Here?
As said here https://forums.openp...ndpost&p=846857 I just want to compile homebuild with original driver and ssl but don't want to discuss the receiver itself here
Re: Howto build unofficial pli for your unsupported receiver #796
Posted 30 April 2018 - 06:03
Why?! Do you want to support a clone? Here?
As said here https://forums.openp...ndpost&p=846857 I just want to compile homebuild with original driver and ssl but don't want to discuss the receiver itself here
You won't get support from us regarding clones and I'm pretty sure you own one.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #797
Posted 30 April 2018 - 13:17
develop-dm900-28.04.2018
https://www.online.e...82-8052674e56e0
develop-dm920-28.04.2018
https://www.online.e...87-3ce6f7dac7be
Please test FTP on dm900
Instead of new flash, user can try this:init 4
opkg update && opkg upgrade
opkg install vsftp --force-reinstall
reboot && exitNo need for this for users with working FTP
Server has vsftp with more patches and init files.
Freon, what you say? If it now works, you have to thank Beeker.Also new things are coming....soon.
FTP not working on DM900
Edited by Adga, 30 April 2018 - 13:18.
DM900 UHD + Formuler Z8 (IPTV) + 520 HD + DM7080HD + DM8000HD
Re: Howto build unofficial pli for your unsupported receiver #798
Re: Howto build unofficial pli for your unsupported receiver #799
Re: Howto build unofficial pli for your unsupported receiver #800
30 user(s) are reading this topic
0 members, 30 guests, 0 anonymous users