Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #841 HFX

  • Senior Member
  • 323 posts

+8
Neutral

Posted 3 May 2018 - 06:39

Beeker has removed the patch and I then did another update and now everything works well again  :)



Re: Howto build unofficial pli for your unsupported receiver #842 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 3 May 2018 - 07:42

Probably the framebuffer needs a new flash, I'm afraid. I tested it on not the online update and with clean install from scratch. Believe me, I'm in the last three days tested more than ten times flash with different things. Yesterday we put this update without warning to the live feed. Sorry for the discomfort.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #843 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 3 May 2018 - 17:36

About FTP again. We must be 100% sure that the new patches are the solution.
Because the patches affected all machines (even the non dreamboxes). It overrides the entire vsftpd of openpli-oe-core.
In folder:
openpli-oe-core/meta-dream/recipes-daemons
folder 'vsftpd'
Like:
openpli-oe-core/meta-dream/recipes-daemons/vsftpd
When you have the time, please test (with clean install wihout backup and multiboot) WITH and WITHOUT old and new vsftpd.
How does it work? Well very simply.
In  'openpli-oe-core/meta-dream/recipes-daemons' the folder 'vsftpd'. That's the NEW vsftpd from openembedded core.
If remove the folder 'vsftpd'(after backup) we use vsftpd from OpenPLi.
So First test with 'folder "vsftpd"' and second without it.
Please test both versions and say, if ftp works or not. Please test it in either case, please.
So your results should be like:
------------------------------------
1-with-folder-vsftpd   : ftp OK / or NOK (vsftpd from openembedded-core)
2-without-folder-vsftpd  : ftp OK / or NOK (vsftpd from OpenPLi)
------------------------------------
 
My results with dm920: (tested with DCC and with WinSCP)
------------------------------------------------------------------------------------
1-with-vsftpd   : Just normal FTP with port 21 OK SFTP with port 22 OK (for SFTP need first with passwd give the password)
2-without-vsftpd  : Just normal FTP with port 21 OK SFTP with port 22 OK
------------------------------------------------------------------------------------

TEST:
https://www.online.e...9e-5c7767d07551

Edited by zeros, 3 May 2018 - 17:39.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #844 Adga

  • Senior Member
  • 140 posts

+9
Neutral

Posted 3 May 2018 - 17:55

 

About FTP again. We must be 100% sure that the new patches are the solution.
Because the patches affected all machines (even the non dreamboxes). It overrides the entire vsftpd of openpli-oe-core.
In folder:
openpli-oe-core/meta-dream/recipes-daemons
folder 'vsftpd'
Like:
openpli-oe-core/meta-dream/recipes-daemons/vsftpd
When you have the time, please test (with clean install wihout backup and multiboot) WITH and WITHOUT old and new vsftpd.
How does it work? Well very simply.
In  'openpli-oe-core/meta-dream/recipes-daemons' the folder 'vsftpd'. That's the NEW vsftpd from openembedded core.
If remove the folder 'vsftpd'(after backup) we use vsftpd from OpenPLi.
So First test with 'folder "vsftpd"' and second without it.
Please test both versions and say, if ftp works or not. Please test it in either case, please.
So your results should be like:
------------------------------------
1-with-folder-vsftpd   : ftp OK / or NOK (vsftpd from openembedded-core)
2-without-folder-vsftpd  : ftp OK / or NOK (vsftpd from OpenPLi)
------------------------------------
 
My results with dm920: (tested with DCC and with WinSCP)
------------------------------------------------------------------------------------
1-with-vsftpd   : Just normal FTP with port 21 OK SFTP with port 22 OK (for SFTP need first with passwd give the password)
2-without-vsftpd  : Just normal FTP with port 21 OK SFTP with port 22 OK
------------------------------------------------------------------------------------

TEST:
https://www.online.e...9e-5c7767d07551

 

 

 

FTP does not work. (neither the first nor the second test)


Edited by Adga, 3 May 2018 - 17:56.

DM900 UHD + Formuler Z8 (IPTV) + 520 HD + DM7080HD + DM8000HD


Re: Howto build unofficial pli for your unsupported receiver #845 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 3 May 2018 - 19:42

I did not expected that. Freon, please give your results also. Adga, as I know, have Mac. Mysterious.
I remove the test, when your results are known.

Edited by zeros, 3 May 2018 - 19:43.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #846 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 3 May 2018 - 19:49

Will do when I visit my friend. I am on Zero 4k now, much less fuss...

MAY THE FORCE BE WITH YOU!


Re: Howto build unofficial pli for your unsupported receiver #847 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 3 May 2018 - 19:53

OK, take your time.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #848 Adga

  • Senior Member
  • 140 posts

+9
Neutral

Posted 3 May 2018 - 20:01

I did not expected that. Freon, please give your results also. Adga, as I know, have Mac. Mysterious.
I remove the test, when your results are known.

I tried this with iMac (iDreamX 3.0.19)

OpenATV 6.2 works...


Edited by Adga, 3 May 2018 - 20:03.

DM900 UHD + Formuler Z8 (IPTV) + 520 HD + DM7080HD + DM8000HD


Re: Howto build unofficial pli for your unsupported receiver #849 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 4 May 2018 - 02:26

A new Amlogic box is coming soon "Amiko Alien 5" with specs "Amlogic 905D, 2GB RAM, DVB-S2/T2/C combo Tuner & wifi" (seems similar to Mecool KI Pro). Moreover, it will be supporting Enigma2 and testing of a Pur-E2 image is under progress. So we may have some lead for Mecool devices from this.

 

2470885ae9a80ddedeb.jpg



Re: Howto build unofficial pli for your unsupported receiver #850 gorski

  • Senior Member
  • 1,699 posts

+46
Good

Posted 4 May 2018 - 13:28

I'm back for more sharing is caring stuff!!! :D :D :D
 

Thank you gorski my friend :)

It's nice the team decided to make their e2 source public.. as it was forked from public work anyways ;)

I'll have a look in their kitchen soon.. too bad they didn't upload their commit-history, but great job nevertheless!

 

Hello, m8!

 

Here is the second instalment of my little contribution to the hobby (however small "my" contribution [as a non-coder] in all this is)...

 

May I present you with the legendary and sadly now defunct PowerBoard PBNIGMA PB Centre, "oldie but goldie" piece of code, which helps tremendously with older HW!

 

Let me explain, please (from memory):

 

It's a set of tools to set up an E2 properly!

 

As it is geared towards PBNIGMA structure it has to be modified to the structure of the basis of an E2 image (OpenPLi or OE-A or DMM).

 

It has a Device & SWAP Managers, plus Flash Expander (as "Expander") included, all in one place, easily used by people who are not put off by a little bit of thinking that is required.

 

It PRESUMES NO AUTOMOUNT of devices/partitions being done by E2 - BUT instead, user sets them up the way s/he needs. Then, all else follows easily!

I warmly recommend this especially for great little old boxes like DB500HD, 800HD PVR, 800HD SE, AZbug HD models and all similar boxes, with too small a flash for everything one might want installed!

 

So, firstly, one must mount one's devices/partitions manually.

 

PB Device Manager will enable one to that in a best possible way:

 

1) initialise = erase/partition a device/partition, then create up to 4 partitions on a single device (with 4 various sizes/ratios)

2) format your newly created partition(s) in many formats, both Windows and Linux type (ext2, 3, 4, fat, fat32 etc.)

3) mount a partition with many different possibilities (/media/hdd, 1, 2, 3, /media/usb, 1, 2, 3, /media/cf etc.)

4) create a SWAP file of various size, on a partition of your choice

5) expand flash by mounting only certain relevant folders from the flash on a device/partition of your choice (USB stick or SSD recommended).

 

This manual mounting of partitions on external or built-in (=internally placed) devices guarantees that no partitions "swap places" after a reboot, thanx to "dynamic automounting" - and then it all goes haywire.... a lot of work gone for no good reason whatsoever!

 

Expander function will do its magic for old machines with very limited flash space and then one can install whatever one wants onto a USB stick or SSD, for instance...

 

One should create a partition to be used solely for Expander! Nothing else should go there! Plus another one for Picons, EPG, SWAP file, subtitles and whatnot...

 

So, please, feel free to continue using this GREAT SET OF TOOLS FOR SETTING UP AN E2 PROPERLY, i.e. in a best possible manner, so the whole thing will function well. I repeat: your manually mounted partitions/devices will NOT swap places, thanx to "dynamic automounting". Please note, there is also an included tool in the PB Centre for a different type of mounting, if one uses 2 identical USB sticks, for instance (by UUID).

 

Good luck!

 

https://github.com/P.../Old-PB-Sources

 

(It's not all there yet because our jolly coder is ill - but when he feels better he will add the rest, he told me, after I asked him for this little favour... :) )


<span style='font-family: comic sans ms,cursive'>"Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!</span><br /> <br /><span style='font-family: comic sans ms,cursive'>Laziness and cowardice are the reasons why such a large proportion of men, even when nature has long emancipated them from alien guidance..." I. Kant, "Political writings" (1784)</span><br /> <br /><span style='font-family: comic sans ms,cursive'><a class='bbc_url' href='<a class='bbc_url' href='http://eserver.org/p...lightenment.txt'>http://eserver.org/p...ent.txt</a>'><a class='bbc_url' href='http://www.english.upenn.edu/~mgamer/Etexts/kant.html</a>'>http://www.english.upenn.edu/~mgamer/Etexts/kant.html</a></a> - the jolly text on Enlightenment, at the basis of Modernity...</span>

Re: Howto build unofficial pli for your unsupported receiver #851 gorski

  • Senior Member
  • 1,699 posts

+46
Good

Posted 4 May 2018 - 13:29

A new Amlogic box is coming soon "Amiko Alien 5" with specs "Amlogic 905D, 2GB RAM, DVB-S2/T2/C combo Tuner & wifi" (seems similar to Mecool KI Pro). Moreover, it will be supporting Enigma2 and testing of a Pur-E2 image is under progress. So we may have some lead for Mecool devices from this.

 

2470885ae9a80ddedeb.jpg

 

Oooh, aacchhh, spilling the beans before our coder(s) is/are ready, I see... :D


<span style='font-family: comic sans ms,cursive'>"Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!</span><br /> <br /><span style='font-family: comic sans ms,cursive'>Laziness and cowardice are the reasons why such a large proportion of men, even when nature has long emancipated them from alien guidance..." I. Kant, "Political writings" (1784)</span><br /> <br /><span style='font-family: comic sans ms,cursive'><a class='bbc_url' href='<a class='bbc_url' href='http://eserver.org/p...lightenment.txt'>http://eserver.org/p...ent.txt</a>'><a class='bbc_url' href='http://www.english.upenn.edu/~mgamer/Etexts/kant.html</a>'>http://www.english.upenn.edu/~mgamer/Etexts/kant.html</a></a> - the jolly text on Enlightenment, at the basis of Modernity...</span>

Re: Howto build unofficial pli for your unsupported receiver #852 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 5 May 2018 - 06:04

A new Amlogic box is coming soon "Amiko Alien 5" with specs "Amlogic 905D, 2GB RAM, DVB-S2/T2/C combo Tuner & wifi" (seems similar to Mecool KI Pro). Moreover, it will be supporting Enigma2 and testing of a Pur-E2 image is under progress. So we may have some lead for Mecool devices from this.
 
2470885ae9a80ddedeb.jpg


Great news as PLi supports some Amiko boxes and it's possible for this STB to be supported by PLi ;)

Amlogic chips are so perfect for audio/video playing but for dvb I don't think so.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #853 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 5 May 2018 - 12:51

05 May, 2018
https://github.com/P...commits/develop
Including:
dm9x0: fix-framebuffer-and-use-ion-to-allocate-accel-memory.patch
PLi-HD Skin problem solved with that patch.
https://github.com/P...34eea3db860446d
dm900 FTP problem solved.
develop-dm900-05.05.2018
https://www.online.e...e8-ab2ef68f844b
develop-dm920-05.05.2018
https://www.online.e...4f-c367f1249e91
Thanks all involved! 
WARNING: Online update is not working- box crashes. Next time will be OK, so please make "clean" install from scratch.

Edited by zeros, 5 May 2018 - 12:51.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #854 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 5 May 2018 - 18:20

At the moment I get this error:

 

"ERROR: sdparm-1.07-r1 do_fetch: Fetcher failure for URL: 'http://sg.danny.cz/s...sdparm-1.07.tgz'. Unable to fetch URL from any source."



Re: Howto build unofficial pli for your unsupported receiver #855 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 5 May 2018 - 18:42

About FTP

could that be the reason that /etc/inetd.conf is missing in DreamOS images



Re: Howto build unofficial pli for your unsupported receiver #856 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 5 May 2018 - 19:33

If you're reading, then the ftp's concern was only with dm900. Thanks Beeker, who found different solutions for testing. The result came as a result of a strong testing.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #857 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 5 May 2018 - 19:49

 

About FTP

could that be the reason that /etc/inetd.conf is missing in DreamOS images

 

 

/ etc/init.d/vsftpd seems to be the reason regarding FTP. Nothing more nothing less.

But i still don't know why it's only affecting dm900 and not dm920, as they using same vsftpd, busybox, kernel, MACHINE_FEATURES and DISTRO_FEATURES.

And both machines building systemd.

Or i overlooked something..


Edited by Beeker, 5 May 2018 - 19:50.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #858 ras

  • Senior Member
  • 46 posts

0
Neutral

Posted 6 May 2018 - 20:09

How to build image for Enfinity?
 
 
 
 MACHINE=enfinity make image
Building image for enfinity
NOTE: Your conf/bblayers.conf has been automatically updated.
NOTE: Your conf/bblayers.conf has been automatically updated.
ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
    Following is the list of potential problems / advisories:
 
    Do not use Bitbake as root.
 
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
root@:~/openpli-oe-core# MACHINE=enfinity bitbake openpli-enigma2-feed
bash: bitbake: command not found
root@kali:~/openpli-oe-core# MACHINE=enfinity make feed
Building feed for enfinity
ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
    Following is the list of potential problems / advisories:
 
    Do not use Bitbake as root.
 
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:129: recipe for target 'feed' failed
make: *** [feed] Error 1
root@:~/openpli-oe-core# 


Re: Howto build unofficial pli for your unsupported receiver #859 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 7 May 2018 - 05:29

Simple: Do not use Bitbake as root ;)

You need to use a normal user not root.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #860 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 7 May 2018 - 09:18

meta-dinobot added:

  • anadol4k
  • axashis4kcombo
  • axashis4kcomboplus
  • dinobot4k
  • dinobot4kl
  • dinobot4kmini
  • dinobot4kplus
  • dinobot4kse
  • mediabox4k

It's hisilicon hi3798m v200 arm chip and I have no idea about it so test it yourself :)


Edited by Persian Prince, 7 May 2018 - 09:18.

Open Vision sources: https://github.com/OpenVisionE2



7 user(s) are reading this topic

0 members, 7 guests, 0 anonymous users