Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #981 ras

  • Senior Member
  • 46 posts

0
Neutral

Posted 15 May 2018 - 19:28

i am a few times



Re: Howto build unofficial pli for your unsupported receiver #982 rantanplan

  • PLi® Contributor
  • 1,857 posts

+87
Good

Posted 15 May 2018 - 19:39

is your built image and you can not tell if everything worked out.
An attempt would be ....
Rebuild image
Now flash an ATV
From there, flash your image via ofgwrite.

Note the first start always takes a bit longer.
Memory is being re-sorted.



Re: Howto build unofficial pli for your unsupported receiver #983 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 15 May 2018 - 19:53

It’s strange! I have made the online update without any problems!

Attached Files


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #984 ras

  • Senior Member
  • 46 posts

0
Neutral

Posted 15 May 2018 - 20:06

is your built image and you can not tell if everything worked out.
An attempt would be ....
Rebuild image
Now flash an ATV
From there, flash your image via ofgwrite.

Note the first start always takes a bit longer.
Memory is being re-sorted.

 

 

 


Edited by ras, 15 May 2018 - 20:09.


Re: Howto build unofficial pli for your unsupported receiver #985 ras

  • Senior Member
  • 46 posts

0
Neutral

Posted 15 May 2018 - 20:10

 

is your built image and you can not tell if everything worked out.
An attempt would be ....
Rebuild image
Now flash an ATV
From there, flash your image via ofgwrite.

Note the first start always takes a bit longer.
Memory is being re-sorted.

 

 

after 30 minutes the same

 


Edited by ras, 15 May 2018 - 20:10.


Re: Howto build unofficial pli for your unsupported receiver #986 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 15 May 2018 - 22:25

Use update.sh and compile again, I did some changes which affect new images only.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #987 ras

  • Senior Member
  • 46 posts

0
Neutral

Posted 15 May 2018 - 23:18

Use update.sh and compile again, I did some changes which affect new images only.

same again the display is on "Run",no boot ?
the file "boot" is missing :
backdrop.mvi
bootlogo.mvi
bootlogo_wait.mvi
vmlinux-3.14.2

Attached Files


Edited by ras, 15 May 2018 - 23:23.


Re: Howto build unofficial pli for your unsupported receiver #988 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 16 May 2018 - 01:04

user: root
pass: pure2

I try this ftp not connected
Only telnet

With control of wepif I went to the menu. settings tried to activate ftp with no luck

Στάλθηκε από το SM-A510F μου χρησιμοποιώντας Tapatalk

Using samba and some other network options, now I have complete /root acess, including write/rewrite files... I see the k1 pro for all my network devices.

At the moment, try to compile oe images. Now, after reinstall Ubuntu 16.04, to see if appear any error. The first make image is very very slowly.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #989 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 16 May 2018 - 02:54

 

 

user: root
pass: pure2

I try this ftp not connected
Only telnet

With control of wepif I went to the menu. settings tried to activate ftp with no luck

Στάλθηκε από το SM-A510F μου χρησιμοποιώντας Tapatalk

Using samba and some other network options, now I have complete /root acess, including write/rewrite files... I see the k1 pro for all my network devices.

At the moment, try to compile oe images. Now, after reinstall Ubuntu 16.04, to see if appear any error. The first make image is very very slowly.

 

 

See:

 

Attached File  network1.png   29.59KB   4 downloads

 

Attached File  network2.png   40.24KB   4 downloads

 

Attached File  network3.jpg   65.52KB   4 downloads

 

Attached File  network4.jpg   42.91KB   3 downloads


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #990 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 16 May 2018 - 03:15

This is remote.conf extracted internal memory (/etc/remote.conf) - K1 PRO: (firmware: Malaysk_KI_PRO_T2_S2_C_Android_7_1_23.04.2018_v_5_2_DTV)

 

Don't work too with this image enigma2 but Android OK.

 

 

#*********************************************************************************************************
#this file is used to store key map table
# custom_name:      name of map table
# custom_code:      custom code for remote device
# release_delay      unit:ms.release will report from kernel to user layer after this period of time
#              from press or repeat triggered.
###PARAS FOR MOUSE MODE:
# fn_key_scancode: scancode of fn key which used to swith mode
# cursor_left_scancode: scancode of left key
# cursor_right_scancode:  scancode of right key
# cursor_up_scancode: scancode of up key
# cursor_down_scancode: scancode of down key
# cursor_ok_scancode: scancode of ok key
#*************************************************************************************************************
custom_name = vs-cursor
custom_code = 0xff00
release_delay = 80

fn_key_scancode = 0x12
cursor_left_scancode = 0x5a
cursor_right_scancode = 0x1b
cursor_up_scancode = 0x06
cursor_down_scancode = 0x16
cursor_ok_scancode = 0x1a


key_begin
    #video strong
        0x59  116    #power
        0x19  113    #mute
        0x0e  130    #info
        0x0d  102    #home
        0x51  14     #del
        0x12  134    #mouse
        0x4d  137    #epg  //ûÕÒµ½
        0x11  237    #dtv

            0x45  125    #menu
            0x05  1      #exit

            0x06  103    #up
            0x5a  105    #left
            0x1a  97     #enter
            0x1b  106    #right
            0x16  108    #down

            0x55  104    #page+
            0x15  109    #page-

            0x52  2      #1
            0x50  3      #2  //û×ŵ½Æ¥ÅäµÄ
            0x10  4      #3
            0x13  115     #vol+

            0x56  5      #4   //û×ŵ½Æ¥ÅäµÄ
            0x54  6      #5
            0x14  7      #6
            0x17  114    #vol-  //û×ŵ½Æ¥ÅäµÄ

            0x4e  8      #7   //û×ŵ½Æ¥ÅäµÄ
            0x4c  9      #8
            0x0c  10     #9
            0x0f  11     #0
   
            0x4a  121    #fr   //û×ŵ½Æ¥ÅäµÄ
            0x48  120    #ff
            0x08  122    #prev
            0x0b  123    #next

            0x46  119    #play/pause   //û×ŵ½Æ¥ÅäµÄ
            0x44  128    #stop
            0x04  56     #pvr
            0x07  132    #repeat

            0x42  134    #red
            0x40  133    #green    //û×ŵ½Æ¥ÅäµÄ
            0x00  131    #yellow   //û×ŵ½Æ¥ÅäµÄ
            0x03  140    #blue     //û×ŵ½Æ¥ÅäµÄ

            0x1f 212     #fav
            0x58 261     #app
            0x18 70      #browser   //û×ŵ½Æ¥ÅäµÄ
 
            0x0e 136     #audio      //û×ŵ½Æ¥ÅäµÄ
            0x09 135     #subtitle

                0x60 160     # red
                0x61 161     # green
                0x62 162     # yellow
                0x63 163     # blue

            0x02 130     #info
            0x01 136     #audio    //û×ŵ½Æ¥ÅäµÄ    
        0x21 52      #.
        0x22 127     #search

                0x64 164     #pvr list
key_end
 


Edited by frankviana, 16 May 2018 - 03:18.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #991 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 16 May 2018 - 07:13

probably you need remotecfg

https://forums.openp...ndpost&p=815372



Re: Howto build unofficial pli for your unsupported receiver #992 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 16 May 2018 - 10:43

OpenPLi working with my raspberrypi3. Compiled for me.

 

https://mega.nz/#!PN...ElnFZ2BMiXi-Lno


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #993 Abu Baniaz

  • PLi® Contributor
  • 2,494 posts

+64
Good

Posted 16 May 2018 - 12:01

If the Amlogic devices use LIRC/Amremote maybe an idea to add remotes. An example is here

https://github.com/o...95f2f7132e57402

We would need to add to the repository that this project uses though.

Re: Howto build unofficial pli for your unsupported receiver #994 jackk11111

  • Member
  • 10 posts

0
Neutral

Posted 16 May 2018 - 12:09

News for new image wetek play 2?

Re: Howto build unofficial pli for your unsupported receiver #995 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 16 May 2018 - 13:07

If the Amlogic devices use LIRC/Amremote maybe an idea to add remotes. An example is here

https://github.com/o...95f2f7132e57402

We would need to add to the repository that this project uses though.

Done: https://github.com/PLi-metas/amremote (We accept pull requests)

 

New bitbake file for this repo: https://github.com/P...tra/amremote.bb


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #996 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 16 May 2018 - 14:12

probably you need remotecfg

https://forums.openp...ndpost&p=815372

 

I see this original files in /usr/bin and /etc/amremote. Changing the code don't work too (/etc/amremote/remote.conf). Maybe k1 pro wrong code or need to compile together?


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #997 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 16 May 2018 - 14:22

 

K2 PRO remote cfg

#amlogic NEC remote
factory_code	= 0xff000001   #video striong
work_mode  		= 0
repeat_enable = 1
repeat_delay = 200
repeat_peroid = 39
release_delay	=	121
debug_enable 	= 1


key_begin
    0x59 116    ;    POWER	
    0x19 113    ;    MUTE    
    0x42 398    ;    RED    
    0x40 399    ;    GREEN    
    0x00 400    ;    YELLOW    
    0x03 401    ;    BLUE    
    0x4a 168    ;    <<		||	KEY_REWIND
    0x48 208    ;    >>		||	KEY_FASTFORWARD
    0x08 165    ;    |<<	||	KEY_PREVIOUSSONG
    0x0b 163    ;    >>|	||	KEY_NEXTSONG
    0x46 164    ;    >||	||	KEY_PLAYPAUSE
    0x44 128    ;    STOP	||	KEY_STOP
    0x1f 167    ;    FAV	||	KEY_RECORD
    0x04 366    ;    PVR    
    0x4d 365    ;    EPG    
    0x02 358    ;    INFO    
    0x09 370    ;    SUBT    
    0x01 392    ;    AUDIO    
#    0x0d 385    ;    HOME	||	KEY_RADIO
#    0x0d 139    ;    HOME	||	KEY_MENU
    0x0d 102    ;    HOME	||	KEY_HOME
    0x11 377    ;    DTV	||	KEY_TV
    0x06 103    ;    UP    
    0x16 108    ;    DOWN    
    0x5a 105    ;    LEFT    
    0x1b 106    ;    RIGHT    
    0x1a 352    ;    OK    
    0x45 139    ;    MENU    
    0x05 174    ;    EXIT    
    0x13 115    ;    VOLUME +    
    0x17 114    ;    VOLUME -    
    0x58 388    ;    APPS	||	KEY_TEXT
    0x12 150    ;    MOUSE	||	KEY_WWW
    0x55 402    ;    PAGEUP	||	KEY_CHANNELUP
    0x15 403    ;    PAGEDOWN	||	KEY_CHANNELDOWN
    0x52 2      ;    1    
    0x50 3    	;    2    
    0x10 4    	;    3    
    0x56 5    	;    4    
    0x54 6    	;    5    
    0x14 7    	;    6    
    0x4e 8    	;    7    
    0x4c 9    	;    8    
    0x0c 10     ;    9    
    0x0f 11     ;    0    
    0x18 412    ;    BROWSER	||	KEY_PREVIOUS
    0x51 407    ;    DEL	||	KEY_NEXT

key_end

 

All my Mecool/Videostrong receivers use the same remote control: old K1 plus (s905), old K2 pro (s905), K1 pro (s905D) and K3 pro (s912). I have this 4 models and need 1 RC only to control all. I think use too for this new models: new K1 plus (s905D) and new K2 pro (s905D), but I don't have this 2 last...


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #998 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 16 May 2018 - 14:31

I see few difference between takitr k2 remote.conf and internal memory k2 pro Android remote.conf:

 

takitr:

 

factory_code    = 0xff000001

 

0x59 116 ; POWER    
0x19 113 ; MUTE
0x42 398 ; RED
0x40 399 ; GREEN
0x00 400 ; YELLOW
0x03 401 ; BLUE

 

Android internal:

 

custom_code = 0xff00

 

0x59  116    #power
0x19  113    #mute

0x60 160     # red
0x61 161     # green
0x62 162     # yellow
0x63 163     # blue


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #999 algdu83

  • Senior Member
  • 36 posts

+1
Neutral

Posted 16 May 2018 - 15:39

I see few difference between takitr k2 remote.conf and internal memory k2 pro Android remote.conf:

Test remote from neutrino is same of enigma

https://cloud.mail.r.../8VJ9/bnSXwYxbb



Re: Howto build unofficial pli for your unsupported receiver #1000 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 16 May 2018 - 15:50

 

I see few difference between takitr k2 remote.conf and internal memory k2 pro Android remote.conf:

Test remote from neutrino is same of enigma

https://cloud.mail.r.../8VJ9/bnSXwYxbb

 

Already tested by me and found not working in this Enigma2 Image.




61 user(s) are reading this topic

0 members, 61 guests, 0 anonymous users