Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #1081 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 May 2018 - 18:46

Ok we have a complete new problem with OpenWebif.

 

I'm working on it.


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1082 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 May 2018 - 18:53

Replace info.py in:

/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/models

And restart enigma2.

 

Attached Files

  • Attached File  info.py   23.31KB   2 downloads

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1083 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 May 2018 - 19:02

Workaround

 

https://github.com/P...cffd9f90636481f


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1084 kloklo

  • Senior Member
  • 35 posts

0
Neutral

Posted 20 May 2018 - 20:08

Replace info.py in:

/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/models

And restart enigma2.

The problem still exists and nothing has changed



Re: Howto build unofficial pli for your unsupported receiver #1085 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 May 2018 - 20:29

I tested it with dm8000. First i get that error indeed as well.

When replacing file, OpenWebif working.

 

Try to delete info.pyo file (not needed for me).

/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/models/info.pyo

Edited by Beeker, 20 May 2018 - 20:33.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1086 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 May 2018 - 20:49

I did a new flash. with up to date openpli-oe-core, pli-extras etc.

 

Openwebif working out of the box.

 

I can't test DM500 and DM800 unfortunately.


Edited by Beeker, 20 May 2018 - 20:50.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1087 atef

  • Senior Member
  • 92 posts

+1
Neutral

Posted 20 May 2018 - 20:50

Edit:

 

Must have a symlink in the:

/var/www/html/feeds/openpli-homebuild/

Directory.

 

This is the result after the reconstruction of the DM900
Yes Vid was created for DM820 Was re-created the feed again
Then perform the required steps or implement them on the empty
My greetings to you and thank you for the good follow-up

atef@atef-ganm:~/openpli-oe-core$ pli-extras/update.sh

pli-extras by MastaG, Persian Prince and Hains

https://github.com/PLi-metas

Each time you run this script all git repositories will get updated to their latest versions!

For extra rc support you need to add your STB files to https://github.com/PLi-metas/extra_rc_models

remote: Counting objects: 31, done.
remote: Compressing objects: 100% (18/18), done.
remote: Total 31 (delta 23), reused 20 (delta 13), pack-reused 0
Unpacking objects: 100% (31/31), done.
From https://github.com/PLi-metas/pli-extras
   e911ff1..79f8507  develop    -> origin/develop
Fetching submodule meta-dinobot
From https://github.com/PLi-metas/meta-dinobot
   0e46e38..dd23c06  develop    -> origin/develop
Updating e911ff1..79f8507
Fast-forward
 README.md                                                                                              | 11 ++++++++++-
 meta-dinobot                                                                                           |  2 +-
 recipes-openpli/enigma2-plugins/enigma2-plugin-extensions-openwebif-extras.bb                          | 24 +++++++++++++++---------
 recipes-openpli/enigma2-plugins/enigma2-plugin-extensions-openwebif-extras/revert-added-lcd-shot.patch | 29 +++++++++++++++++++++++++++++
 4 files changed, 55 insertions(+), 11 deletions(-)
 create mode 100644 recipes-openpli/enigma2-plugins/enigma2-plugin-extensions-openwebif-extras/revert-added-lcd-shot.patch
Synchronizing submodule url for 'meta-amlogic'
Synchronizing submodule url for 'meta-azbox'
Synchronizing submodule url for 'meta-ceryon'
Synchronizing submodule url for 'meta-dags'
Synchronizing submodule url for 'meta-dinobot'
Synchronizing submodule url for 'meta-dream'
Synchronizing submodule url for 'meta-entwopia'
Synchronizing submodule url for 'meta-fulan'
Synchronizing submodule url for 'meta-ini'
Synchronizing submodule url for 'meta-octagon'
Synchronizing submodule url for 'meta-odin'
Synchronizing submodule url for 'meta-raspberrypi'
Synchronizing submodule url for 'meta-xcore'
Submodule path 'meta-dinobot': checked out 'dd23c067ae5750b11aca205883146c022f041397'
Generating /home/atef/openpli-oe-core/build/conf/bblayers.conf
Updating Git repositories...
remote: Counting objects: 6, done.
remote: Compressing objects: 100% (2/2), done.
remote: Total 6 (delta 4), reused 6 (delta 4), pack-reused 0
Unpacking objects: 100% (6/6), done.
From https://github.com/OpenPLi/openpli-oe-core
   2a6f01cd..f3562f97  release-6.2 -> origin/release-6.2
Already up to date.
Synchronizing submodule url for 'bitbake'
Synchronizing submodule url for 'meta-amiko'
Synchronizing submodule url for 'meta-axasuhd'
Synchronizing submodule url for 'meta-edision'
Synchronizing submodule url for 'meta-formuler'
Synchronizing submodule url for 'meta-gfutures'
Synchronizing submodule url for 'meta-gi'
Synchronizing submodule url for 'meta-gigablue'
Synchronizing submodule url for 'meta-miraclebox'
Synchronizing submodule url for 'meta-openembedded'
Synchronizing submodule url for 'meta-qt5'
Synchronizing submodule url for 'meta-qviart'
Synchronizing submodule url for 'meta-sab'
Synchronizing submodule url for 'meta-spycat'
Synchronizing submodule url for 'meta-vuplus'
Synchronizing submodule url for 'meta-xp'
Synchronizing submodule url for 'meta-xpeedc'
Synchronizing submodule url for 'meta-xsarius.pli5'
Synchronizing submodule url for 'meta-xtrend'
Synchronizing submodule url for 'meta-zgemma'
Synchronizing submodule url for 'openembedded-core'
The openpli OE is now up-to-date.
atef@atef-ganm:~/openpli-oe-core$ MACHINE=dm900 make image
Building image for dm900
NOTE: Your conf/bblayers.conf has been automatically updated.
NOTE: Your conf/bblayers.conf has been automatically updated.
WARNING: /home/atef/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/extra/stslave-fw_0.1.bb: Unable to get checksum for stslave-fw SRC_URI entry audio.elf: file could not be found                                                                            | ETA:  0:01:13
WARNING: /home/atef/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/extra/stslave-fw_0.1.bb: Unable to get checksum for stslave-fw SRC_URI entry video.elf: file could not be found
WARNING: /home/atef/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/extra/stlirc_0.9.0.bb: Unable to get checksum for stlirc SRC_URI entry lircd_dm900.conf: file could not be found
WARNING: /home/atef/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules.conf: file could not be found
WARNING: /home/atef/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules-conf.conf: file could not be found
WARNING: /home/atef/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules.conf: file could not be found
WARNING: /home/atef/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules-conf.conf: file could not be found
Parsing recipes: 100% |##########################################################################################################################################################################################################################################| Time: 0:01:08
Parsing of 3027 .bb files complete (0 cached, 3027 parsed). 3837 targets, 670 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.34.0"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "ubuntu-18.04"
TARGET_SYS        = "arm-oe-linux-gnueabi"
MACHINE           = "dm900"
DISTRO            = "openpli"
DISTRO_VERSION    = "homebuild"
TUNE_FEATURES     = "arm armv7ve vfp neon vfpv4 callconvention-hard cortexa15"
TARGET_FPU        = "hard"
meta-oe           
meta-filesystems  
meta-multimedia   
meta-networking   
meta-python       
meta-webserver    = "HEAD:dfbdd28d206a74bf264c2f7ee0f7b3e5af587796"
meta              = "HEAD:93dd2f9f3edf0584f9e806c629611d645dd72dbf"
meta-openpli      = "develop:4668cb171521d82a0102e38a5317124361e2439f"
meta-vuplus       = "HEAD:525268ac0f87dd649105ae74114fe6989774cce2"
meta-xsarius.pli5 = "HEAD:30601240c522e9aac52dd77096e7b4954d60f0f6"
meta-qviart       = "HEAD:4629a80a035db39d1c37905fb8235184c0644228"
meta-xp           = "HEAD:2f818d2ee1efbf0a4536d8384d716a0767cf7039"
meta-xtrend       = "HEAD:ac054abbe235f33f6a69e7a8ff0fa9a7efa84f59"
meta-formuler     = "HEAD:e1d33c48edb119dcc3163855b0b1af510912ef52"
meta-gfutures     = "HEAD:4015ce2bb7c46cd10574eff3100f67fb74c38bda"
meta-xpeedc       = "HEAD:f12908a5573de8a6a06ad9f75081846a590511c4"
meta-zgemma       = "HEAD:e30ea0d4651b805cabc7273285151d4c03d83249"
meta-edision      = "HEAD:d792a8d81164ad0fed279a453350a3b965032169"
meta-miraclebox   = "HEAD:d44871d4d1f357d5b38488ed505b48fa8c8feff3"
meta-spycat       = "HEAD:a19f11bbcdcad969e9f6f8d2c30df0653427d4cb"
meta-gi           = "HEAD:01fd1e8256f53d40371e65514e13a53ef53e400d"
meta-sab          = "HEAD:92262feb14e4005c8096150daac7313e9cb3d85a"
meta-gigablue     = "HEAD:8d3c8baa4f7d6bb241f13d212fd3a1b251d2ada3"
meta-amiko        = "HEAD:eb5c966a3ba38388abdcda61ed07fb056e4d488b"
meta-axasuhd      = "HEAD:a24082ff56ed6e21d642af6e390b6e4de4aea456"
meta-local        = "develop:4668cb171521d82a0102e38a5317124361e2439f"
meta-qt5          = "HEAD:c6aa602d0640040b470ee81de39726276ddc0ea3"
meta-amlogic      = "HEAD:03976fa17d832df308e68251e6b08dd623ba698f"
meta-azbox        = "HEAD:4baf6b76cb2fd48891df9fe8d69a59ecc8f3c298"
meta-ceryon       = "HEAD:66ea29caee46c9244b2281ef9a6bf7097d35b498"
meta-dags         = "HEAD:c0b9f09093eac7477cb24bed36a8e625eb3d5a96"
meta-dinobot      = "HEAD:dd23c067ae5750b11aca205883146c022f041397"
meta-dream        = "HEAD:0fbd5160954ea4abc7c3e6bc15623aa6d5a6c59c"
meta-entwopia     = "HEAD:1e2a7a434b90c2e9d1f01bc2deb8ab2eee931019"
meta-fulan        = "HEAD:19a39a5b561e1a6a60c8e8ad38eecd511f5cfddd"
meta-ini          = "HEAD:6a8d579ead853aa9f223e3462f825c5739a3dc77"
meta-octagon      = "HEAD:3007bf7387709ae2be53bdc66047dc28b9851ded"
meta-odin         = "HEAD:6814cdda4d14e71850f30d78d5be7ebcc77721a2"
meta-raspberrypi  = "HEAD:d95f0b61526c5d0fae82f43463280ad6aecd3087"
meta-xcore        = "HEAD:cff65e53f01c8e06ddc8a08dcb15002a562c0193"
pli-extras        = "develop:79f85071555e6a5be56d7139bcffd9f90636481f"

Initialising tasks: 100% |#######################################################################################################################################################################################################################################| Time: 0:00:10
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: gstreamer1.0-libav-1.14.0+gitAUTOINC+1830c75cd2-r0 do_package_qa: QA Issue: gstreamer1.0-libav: The compile log indicates that host include and/or library paths were used.
         Please check the log '/home/atef/openpli-oe-core/build/tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/gstreamer1.0-libav/1.14.0+gitAUTOINC+1830c75cd2-r0/temp/log.do_compile' for more information. [compile-host-path]
NOTE: Tasks Summary: Attempted 5886 tasks of which 5052 didn't need to be rerun and all succeeded.

Summary: There were 8 WARNING messages shown.
atef@atef-ganm:~/openpli-oe-core$ 


VU PLUS ULTIMO:Dreambox 820 hd:Spark 7111


Re: Howto build unofficial pli for your unsupported receiver #1088 atef

  • Senior Member
  • 92 posts

+1
Neutral

Posted 20 May 2018 - 21:53

After experiment the DM900 device image
Missing many things list: service searching
It has only Tuner configuration
OpenWebif browser can not do screenshots
Please edit
Greetings
 
Attached File  20-05-2018 10-50-01 م.png   417.07KB   4 downloads

VU PLUS ULTIMO:Dreambox 820 hd:Spark 7111


Re: Howto build unofficial pli for your unsupported receiver #1089 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 May 2018 - 22:45

.


Edited by Beeker, 20 May 2018 - 22:46.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1090 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 May 2018 - 22:51

I see what i can do?.

But not in the short term(not this week).


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1091 atef

  • Senior Member
  • 92 posts

+1
Neutral

Posted 20 May 2018 - 23:12

I see what i can do?.

But not in the short term(not this week).

 

Thank you for your reply
Good luck

VU PLUS ULTIMO:Dreambox 820 hd:Spark 7111


Re: Howto build unofficial pli for your unsupported receiver #1092 kookesam

  • Senior Member
  • 151 posts

0
Neutral

Posted 21 May 2018 - 00:06

Good evening here I have an android box EleinkSmart  Amlogic S905X here is the log:

 

coco@coco-OptiPlex-760:~/openpli-oe-core$ cd build
coco@coco-OptiPlex-760:~/openpli-oe-core/build$ source env.source
coco@coco-OptiPlex-760:~/openpli-oe-core/build$ MACHINE=s905x
coco@coco-OptiPlex-760:~/openpli-oe-core/build$ bitbake openpli-enigma2-image
Loading cache: 100% |############################################| Time: 0:00:01
Loaded 3553 entries from dependency cache.
WARNING: /home/coco/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules.conf: file could not be found
WARNING: /home/coco/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules-conf.conf: file could not be found
WARNING: /home/coco/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules.conf: file could not be found
WARNING: /home/coco/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules-conf.conf: file could not be found
Parsing recipes: 100% |##########################################| Time: 0:01:14
Parsing of 3026 .bb files complete (2743 cached, 283 parsed). 3836 targets, 643 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
ERROR: Nothing PROVIDES 'u-boot'
ERROR: u-boot-hardkernel PROVIDES u-boot but was skipped: incompatible with machine s905x (not in COMPATIBLE_MACHINE)
ERROR: u-boot-hardkernel PROVIDES u-boot but was skipped: incompatible with machine s905x (not in COMPATIBLE_MACHINE)
ERROR: u-boot-odroidc2 PROVIDES u-boot but was skipped: incompatible with machine s905x (not in COMPATIBLE_MACHINE)
ERROR: u-boot was skipped: Either UBOOT_MACHINE or UBOOT_CONFIG must be set in the s905x machine configuration.
ERROR: u-boot-amlogic PROVIDES u-boot but was skipped: incompatible with machine s905x (not in COMPATIBLE_MACHINE)
ERROR: u-boot was skipped: incompatible with machine s905x (not in COMPATIBLE_MACHINE)
ERROR: u-boot-khadas-vim PROVIDES u-boot but was skipped: incompatible with machine s905x (not in COMPATIBLE_MACHINE)
ERROR: u-boot was skipped: Either UBOOT_MACHINE or UBOOT_CONFIG must be set in the s905x machine configuration.
ERROR: Required build target 'openpli-enigma2-image' has no buildable providers.
Missing or unbuildable dependency chain was: ['openpli-enigma2-image', 'u-boot']

Summary: There were 4 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
coco@coco-OptiPlex-760:~/openpli-oe-core/build$
 



Re: Howto build unofficial pli for your unsupported receiver #1093 atef

  • Senior Member
  • 92 posts

+1
Neutral

Posted 21 May 2018 - 00:24

How to create symlinks for Apache?

I made instruction for you.Assuming you build for dm820 and dm900 and as login name atef.

Also for others for example how to do.

It's not on our website and some manuals are out of date.


sudo apt install apache2

cd /var/www/html

sudo mkdir feeds;cd feeds;sudo mkdir openpli-homebuild;cd openpli-homebuild

sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/dm820 dm820

sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/dm900 dm900

sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/all all

sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/mips32el mips32el

sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/cortexa15hf-neon-vfpv4 cortexa15hf-neon-vfpv4

With other words, all directories in:

openpli-oe-core/build/tmp/deploy/ipk/

Must have a symlink to the directories in:

/var/www/html/feeds/openpli-homebuild/

No more, no less.

 

When done, test with telnet.

opkg update

You probably need to replace hostname with IP address in the /etc/opkg files, or add hostname PC to etc/host box.

 

file:///home/atef/openpli-oe-core/build/tmp/deploy/ipk/

atef@atef-ganm:~$ sudo apt install apache2
[sudo] password for atef: 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following package was automatically installed and is no longer required:
  guile-2.0-libs
Use 'sudo apt autoremove' to remove it.
The following additional packages will be installed:
  apache2-bin apache2-data apache2-utils libaprutil1-dbd-sqlite3 libaprutil1-ldap
Suggested packages:
  apache2-doc apache2-suexec-pristine | apache2-suexec-custom
The following NEW packages will be installed:
  apache2 apache2-bin apache2-data apache2-utils libaprutil1-dbd-sqlite3 libaprutil1-ldap
0 upgraded, 6 newly installed, 0 to remove and 1 not upgraded.
Need to get 1,502 kB of archives.
After this operation, 5,847 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://eg.archive.ubuntu.com/ubuntu bionic/main i386 libaprutil1-dbd-sqlite3 i386 1.6.1-2 [10.9 kB]
Get:2 http://eg.archive.ubuntu.com/ubuntu bionic/main i386 libaprutil1-ldap i386 1.6.1-2 [8,928 B]
Get:3 http://eg.archive.ubuntu.com/ubuntu bionic/main i386 apache2-bin i386 2.4.29-1ubuntu4 [1,139 kB]
Get:4 http://eg.archive.ubuntu.com/ubuntu bionic/main i386 apache2-utils i386 2.4.29-1ubuntu4 [87.6 kB]
Get:5 http://eg.archive.ubuntu.com/ubuntu bionic/main i386 apache2-data all 2.4.29-1ubuntu4 [160 kB]
Get:6 http://eg.archive.ubuntu.com/ubuntu bionic/main i386 apache2 i386 2.4.29-1ubuntu4 [95.1 kB]
Fetched 1,502 kB in 5s (286 kB/s) 
Selecting previously unselected package libaprutil1-dbd-sqlite3:i386.
(Reading database ... 296300 files and directories currently installed.)
Preparing to unpack .../0-libaprutil1-dbd-sqlite3_1.6.1-2_i386.deb ...
Unpacking libaprutil1-dbd-sqlite3:i386 (1.6.1-2) ...
Selecting previously unselected package libaprutil1-ldap:i386.
Preparing to unpack .../1-libaprutil1-ldap_1.6.1-2_i386.deb ...
Unpacking libaprutil1-ldap:i386 (1.6.1-2) ...
Selecting previously unselected package apache2-bin.
Preparing to unpack .../2-apache2-bin_2.4.29-1ubuntu4_i386.deb ...
Unpacking apache2-bin (2.4.29-1ubuntu4) ...
Selecting previously unselected package apache2-utils.
Preparing to unpack .../3-apache2-utils_2.4.29-1ubuntu4_i386.deb ...
Unpacking apache2-utils (2.4.29-1ubuntu4) ...
Selecting previously unselected package apache2-data.
Preparing to unpack .../4-apache2-data_2.4.29-1ubuntu4_all.deb ...
Unpacking apache2-data (2.4.29-1ubuntu4) ...
Selecting previously unselected package apache2.
Preparing to unpack .../5-apache2_2.4.29-1ubuntu4_i386.deb ...
Unpacking apache2 (2.4.29-1ubuntu4) ...
Processing triggers for ufw (0.35-5) ...
Processing triggers for ureadahead (0.100.0-20) ...
ureadahead will be reprofiled on next reboot
Setting up libaprutil1-dbd-sqlite3:i386 (1.6.1-2) ...
Setting up apache2-utils (2.4.29-1ubuntu4) ...
Setting up apache2-data (2.4.29-1ubuntu4) ...
Processing triggers for systemd (237-3ubuntu10) ...
Processing triggers for man-db (2.8.3-2) ...
Setting up libaprutil1-ldap:i386 (1.6.1-2) ...
Setting up apache2-bin (2.4.29-1ubuntu4) ...
Setting up apache2 (2.4.29-1ubuntu4) ...
Enabling module mpm_event.
Enabling module authz_core.
Enabling module authz_host.
Enabling module authn_core.
Enabling module auth_basic.
Enabling module access_compat.
Enabling module authn_file.
Enabling module authz_user.
Enabling module alias.
Enabling module dir.
Enabling module autoindex.
Enabling module env.
Enabling module mime.
Enabling module negotiation.
Enabling module setenvif.
Enabling module filter.
Enabling module deflate.
Enabling module status.
Enabling module reqtimeout.
Enabling conf charset.
Enabling conf localized-error-pages.
Enabling conf other-vhosts-access-log.
Enabling conf security.
Enabling conf serve-cgi-bin.
Enabling site 000-default.
Created symlink /etc/systemd/system/multi-user.target.wants/apache2.service → /lib/systemd/system/apache2.service.
Created symlink /etc/systemd/system/multi-user.target.wants/apache-htcacheclean.service → /lib/systemd/system/apache-htcacheclean.service.
Processing triggers for ureadahead (0.100.0-20) ...
Processing triggers for systemd (237-3ubuntu10) ...
Processing triggers for ufw (0.35-5) ...
atef@atef-ganm:~$ cd /var/www/html
atef@atef-ganm:/var/www/html$ sudo mkdir feeds;cd feeds;sudo mkdir openpli-homebuild;cd openpli-homebuild
atef@atef-ganm:/var/www/html/feeds/openpli-homebuild$ sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/dm820 dm820
atef@atef-ganm:/var/www/html/feeds/openpli-homebuild$ sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/dm900 dm900
atef@atef-ganm:/var/www/html/feeds/openpli-homebuild$ sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/all all
atef@atef-ganm:/var/www/html/feeds/openpli-homebuild$ sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/mips32el mips32el
atef@atef-ganm:/var/www/html/feeds/openpli-homebuild$ sudo ln -s /home/atef/openpli-oe-core/build/tmp/deploy/ipk/cortexa15hf-neon-vfpv4 cortexa15hf-neon-vfpv4


VU PLUS ULTIMO:Dreambox 820 hd:Spark 7111


Re: Howto build unofficial pli for your unsupported receiver #1094 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 21 May 2018 - 07:20

I see no errors and no question.

 

So far so good.

 

telnet to box

opkg update

When no errors you can run online update and install plugins from GUI enigma2.

 

In case of errors.

 

ftp to box, to:

etc/opkg

You see the files all-feed.conf , dm900.conf and cortexa15hf-neon-vfpv4-feed.conf  in case of dm900. Other files are not important.

 

open these files and replace hostname with IP adress PC.

 

So it looks like this for example all-feed.conf

src/gz openpli-all http://192.168.178.15/feeds/openpli-homebuild/all

And edit the other two files as well.


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1095 kloklo

  • Senior Member
  • 35 posts

0
Neutral

Posted 21 May 2018 - 13:56

 

web.Server Traceback (most recent call last):

exceptions.UnboundLocalError: local variable 'mode' referenced before assignment
/usr/lib/python2.7/site-packages/twisted/web/server.py:189 in process
188
189
190
/usr/lib/python2.7/site-packages/twisted/web/server.py:238 in render
237
238
239
/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/models/grab.py:100 in render
99 # the object alive at least until the request finishes
100 request.grab_in_progress = GrabRequest(request, self.session)
101 return server.NOT_DONE_YET
/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/models/grab.py:56 in __init__
55 self.container.setBufferSize(32768)
56 if mode == "lcd":
57 if self.container.execute(command):
exceptions.UnboundLocalError: local variable 'mode' referenced before assignme

Edited by kloklo, 21 May 2018 - 13:57.


Re: Howto build unofficial pli for your unsupported receiver #1096 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 21 May 2018 - 14:11

Did you do a new flash after replacing info.py file?

 

If not, replace it again(sorry) with this file. This is an unmodified file (original).

 

After restart enigma2 you need to delete this file.

 

try it anyway..

 

I did new flash box and no problem.

/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/models/

Attached Files

  • Attached File  info.py   23.4KB   0 downloads

Edited by Beeker, 21 May 2018 - 14:15.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1097 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 21 May 2018 - 14:58

To be sure, also replace owibranding.py

 

Same directory.

 

Edit: No need to delete both files.

 

Attached Files


Edited by Beeker, 21 May 2018 - 14:58.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1098 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 22 May 2018 - 13:02

You should recompile oe-alliance 4.1 linkdroid a5 with New kernel config. You can add your tuner driver config. After compile

 

OpenATV 6.2 too: no drivers...

 

opkg install kernel-module-smsdvb kernel-module-smsmdtv kernel-mod
dule-smssdio kernel-module-smsusb enigma2-plugin-drivers-dvb-usb-siano firmware-d
dvb-siano


Couldn't find anything to satisfy 'kernel-module-smssdio'.

Unknown package 'kernel-module-smsdvb'.

Unknown package 'kernel-module-smsmdtv'.
Unknown package 'kernel-module-smssdio'.
Unknown package 'kernel-module-smsusb'.
Package enigma2-plugin-drivers-dvb-usb-siano (1.0-r0) installed in root is up to date.
Package firmware-dvb-siano (1.0-r0) installed in root is up to date.

Collected errors:

 * opkg_solver_install: Cannot install package kernel-module-smsdvb.
 * opkg_solver_install: Cannot install package kernel-module-smsmdtv.
 * opkg_solver_install: Cannot install package kernel-module-smssdio.
 * opkg_solver_install: Cannot install package kernel-module-smsusb.


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1099 ftp21_

  • Senior Member
  • 73 posts

+9
Neutral

Posted 22 May 2018 - 15:03

 

You should recompile oe-alliance 4.1 linkdroid a5 with New kernel config. You can add your tuner driver config. After compile

 

OpenATV 6.2 too: no drivers...

 

opkg install kernel-module-smsdvb kernel-module-smsmdtv kernel-mod
dule-smssdio kernel-module-smsusb enigma2-plugin-drivers-dvb-usb-siano firmware-d
dvb-siano


Couldn't find anything to satisfy 'kernel-module-smssdio'.

Unknown package 'kernel-module-smsdvb'.

Unknown package 'kernel-module-smsmdtv'.
Unknown package 'kernel-module-smssdio'.
Unknown package 'kernel-module-smsusb'.
Package enigma2-plugin-drivers-dvb-usb-siano (1.0-r0) installed in root is up to date.
Package firmware-dvb-siano (1.0-r0) installed in root is up to date.

Collected errors:

 * opkg_solver_install: Cannot install package kernel-module-smsdvb.
 * opkg_solver_install: Cannot install package kernel-module-smsmdtv.
 * opkg_solver_install: Cannot install package kernel-module-smssdio.
 * opkg_solver_install: Cannot install package kernel-module-smsusb.

 

 

 

Have you exec opkg update before?

 

Can you share the OpenPli image?



Re: Howto build unofficial pli for your unsupported receiver #1100 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 22 May 2018 - 18:38

Yes, but I think don't have his modules att the moment. Tested with Pure2 and OpenAtv using Mecool K1 Pro.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)



8 user(s) are reading this topic

0 members, 6 guests, 0 anonymous users


    Bing (1), Google (1)