Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #1821 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 24 July 2018 - 17:47

I would request Persian Prince to replace dts files included in the recipes with the following:

Attached Files


Edited by engineerkhan15, 24 July 2018 - 17:48.


Re: Howto build unofficial pli for your unsupported receiver #1822 algdu83

  • Senior Member
  • 36 posts

+1
Neutral

Posted 24 July 2018 - 18:40

Problem lies with the dts files included with the recipes. I replaced with the dts obtained from decompiled dtb from CoreELEC, then it boots OK. But now remote is not working, while it was working OK with last night's image.

I will share new test images shortly.

Use webif for test scan



Re: Howto build unofficial pli for your unsupported receiver #1823 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 24 July 2018 - 19:05

New test images:

 

K1 Pro:

http://www.mediafire...24-3_sdcard.zip

 

K2 Pro (S905):

http://www.mediafire...24-2_sdcard.zip

 

K1 Plus:

http://www.mediafire...24-2_sdcard.zip



Re: Howto build unofficial pli for your unsupported receiver #1824 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 24 July 2018 - 19:17

 

Good to rename this files. :)

 

testing now last (3) - k1 pro and k2 pro (s905)

 

I'll try to set with this command line:

 

echo "options smsmdtv default_mode=0" | tee /etc/modprobe.d/smsmdtv.conf

 

mode 0: dvb-s

mode 1: dvb-t

 

I don't know if is necessary choose, but I did this when testing my ISDB-T tuner

 

https://forums.openp...ndpost&p=884119


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1825 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 24 July 2018 - 19:19

Last image your (version 2), remote no work and no channels too (choosing too smsdtv.conf - not necessary too)

 

Downloading and testing this your (version 3). Coming soon I'll send my results (remote and scan)


Edited by frankviana, 24 July 2018 - 19:21.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1826 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 24 July 2018 - 19:47

Testes with k1 pro

 

no remote working, no scan channels (no signal)


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1827 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 19:51

Problem lies with the dts files included with the recipes. I replaced with the dts obtained from decompiled dtb from CoreELEC, then it boots OK. But now remote is not working, while it was working OK with last night's image.

I will share new test images shortly.

I did use the coreelec dtbs in the meta-amlogic repo, the official coreelec dtbs don't have remote support because they use lirc for remote which uses meson-ir driver , while we use remotecfg tool which uses meson-remote driver, I enabled meson-remote  in the latest commits https://github.com/P...1f3af751b876686

Also I just diffed the dts files you uploaded against the dts files produced by openpli and there is no important difference, only the openvfd node that coreelec added recently(which is not important for boot) so whatever is preventing booting the dts files are not the problem

▶ diff gxbb_p200_k1_plus.dts k1plusopen 
1100,1102c1100,1102
< 	le-vfd {
< 		compatible = "le,vfd";
< 		dev_name = "le-vfd";
---
> 	openvfd {
> 		compatible = "open,vfd";
> 		dev_name = "openvfd";

~/Downloads/DTS                                                                                                                               ⍉
▶ diff gxbb_p200_k2_pro.dts k2proopen 
1100,1102c1100,1102
< 	le-vfd {
< 		compatible = "le,vfd";
< 		dev_name = "le-vfd";
---
> 	openvfd {
> 		compatible = "open,vfd";
> 		dev_name = "openvfd";

 

while it was working OK with last night's image.

can you tell which commit that made the images not bootable? try to build an image and test boot it with each commit and see what commit caused the images to not boot

 

https://github.com/P...commits/develop

0 Links


Re: Howto build unofficial pli for your unsupported receiver #1828 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 19:55

no boot  KI pro

 

 

k1 plus no boot

 

can you guys give more info? does the device stay on the amlogic logo or does it become black screen or what exactly ? if you guys have serial Uart output that would be great

 

Here are new test images for K1 Pro, K2 Pro (S905) & K3 Pro, compiled after latest changes.

 

K1 Pro:

http://www.mediafire...24-2_sdcard.zip

Impossible to test

not boot + problem with resolution

 

How did you know there is problem with resolution if you say it doesn't boot :huh: :huh:



Re: Howto build unofficial pli for your unsupported receiver #1829 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 24 July 2018 - 20:18

 

K1 pro tests:

 

Attached File  k1.png   34.33KB   10 downloads

 

Attached File  k1.2.png   24.7KB   8 downloads

 

Log enigma2 when testing manual scan (attach)

Attached Files


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1830 sauna

  • Senior Member
  • 38 posts

0
Neutral

Posted 24 July 2018 - 20:22

The k1 plus logo blinks twice. The next becomes a black screen.



Re: Howto build unofficial pli for your unsupported receiver #1831 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 24 July 2018 - 20:32

The k1 plus logo blinks twice. The next becomes a black screen.

 

Here, k1 pro boot ok, image ok too - no necessary reinsert HDMI cable and no change skin to PLI-HD. The problem now is Grab screenshot (webif), remote and no channels scan.


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1832 sauna

  • Senior Member
  • 38 posts

0
Neutral

Posted 24 July 2018 - 20:42

load only when I change kernel.itb from image 01/07/2018.



Re: Howto build unofficial pli for your unsupported receiver #1833 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 24 July 2018 - 20:53

Automatic scan (single satellite 58ºW C Band - DVB-S)

 

Log:

Attached Files


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1834 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 21:12

 

The k1 plus logo blinks twice. The next becomes a black screen.

 

Here, k1 pro boot ok, image ok too - no necessary reinsert HDMI cable and no change skin to PLI-HD. The problem now is Grab screenshot (webif), remote and no channels scan.

 

for remote check to see if you have /dev/amremote node ?



Re: Howto build unofficial pli for your unsupported receiver #1835 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 24 July 2018 - 21:23

 

 

The k1 plus logo blinks twice. The next becomes a black screen.

 

Here, k1 pro boot ok, image ok too - no necessary reinsert HDMI cable and no change skin to PLI-HD. The problem now is Grab screenshot (webif), remote and no channels scan.

 

for remote check to see if you have /dev/amremote node ?

 

 

No... only /etc/amremote

 

See when appear remote (log e2)

 

[eRCInputEventDriver] devicename=meson-ir
[eRCInputEventDriver] devicename=meson-ir
[eRCDeviceInputDev] device "meson-ir" is a remotecontrol


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1836 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 21:24

The k1 plus logo blinks twice. The next becomes a black screen.

this might be an issue with the framebuffer setting up, can you reach the device in any other way (telnet, ssh) ?



Re: Howto build unofficial pli for your unsupported receiver #1837 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 21:26

 

 

 

The k1 plus logo blinks twice. The next becomes a black screen.

 

Here, k1 pro boot ok, image ok too - no necessary reinsert HDMI cable and no change skin to PLI-HD. The problem now is Grab screenshot (webif), remote and no channels scan.

 

for remote check to see if you have /dev/amremote node ?

 

 

No... only /etc/amremote

 

See when appear remote (log e2)

 

[eRCInputEventDriver] devicename=meson-ir
[eRCInputEventDriver] devicename=meson-ir
[eRCDeviceInputDev] device "meson-ir" is a remotecontrol

 

then you used the old  dtb, update and build image again



Re: Howto build unofficial pli for your unsupported receiver #1838 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 24 July 2018 - 21:29

 

 

 

 

The k1 plus logo blinks twice. The next becomes a black screen.

 

Here, k1 pro boot ok, image ok too - no necessary reinsert HDMI cable and no change skin to PLI-HD. The problem now is Grab screenshot (webif), remote and no channels scan.

 

for remote check to see if you have /dev/amremote node ?

 

 

No... only /etc/amremote

 

See when appear remote (log e2)

 

[eRCInputEventDriver] devicename=meson-ir
[eRCInputEventDriver] devicename=meson-ir
[eRCDeviceInputDev] device "meson-ir" is a remotecontrol

 

then you used the old  dtb, update and build image again

 

 

Thank you.

 

I'm using this image: https://forums.openp...ndpost&p=910968

 

Here, to build the last image, my ubutnu past more 2 days, :)


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #1839 sauna

  • Senior Member
  • 38 posts

0
Neutral

Posted 24 July 2018 - 21:34

 on k1plus with the old kernel.itb amremote node no.and with native kernel.itb I can not check, black screen.via telnet, ssh, too, there is no connection


Edited by sauna, 24 July 2018 - 21:38.


Re: Howto build unofficial pli for your unsupported receiver #1840 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 21:39

 on k1plus with the old kernel.itb amremote node no.and with native kernel.itb I can not check, black screen.

forget about the screen for now, after you boot and see black screen try to access the device from ssh or telnet if you can the the device has booted but there is a problem with framebuffer setting

Also if you can try to use a different screen




1 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


    Google (1)