32 replies to this topic

[lynyrd]

Hi, I installed and configured remotestreamconvert to duplicate the channels on another DM800 decoder in another room.
Here are the operations I did

 

 

 

 

Everything happens normally, but the picture does not appear.

Thank you for your help.

[first_damned]

Try enabling fallback tuner on the client box with the ip of the main box.

Use channel importer plugin instead, this sets it up for you.


Sent from my iPhone using Tapatalk

[lynyrd]

Try enabling fallback tuner on the client box with the ip of the main box.

Use channel importer plugin instead, this sets it up for you.


Sent from my iPhone using Tapatalk

 

I did it, it works but no picture.

 

 

 

[lynyrd]

that's what he tells me

[Frenske]

In case your second dm800, let’s call it the main STB, is active, only channels on thesame transponder work.
Put the main DM800 in standby and try again.

[lynyrd]

In case your second dm800, let’s call it the main STB, is active, only channels on thesame transponder work.
Put the main DM800 in standby and try again.

The decoder that serves as server is off

[Frenske]

I’ll test later this evening with a random alternative combination.

[lynyrd]

I’ll test later this evening with a random alternative combination.

thank you very much

[Frenske]

 

The decoder that serves as server is off

Off? I guess you mean in standby. If it's actually off then you won't get a signal.

I just tried to connect with an Edison OSnino to an 'ancient' DM800se and I got the message 'no date on this transponder'. That was kinda logic as I didn't put the DM800se in standby. As I put in stanby all worked ok. So there must be some local issue.

[lynyrd]

 

 

The decoder that serves as server is off

Off? I guess you mean in standby. If it's actually off then you won't get a signal.

I just tried to connect with an Edison OSnino to an 'ancient' DM800se and I got the message 'no date on this transponder'. That was kinda logic as I didn't put the DM800se in standby. As I put in stanby all worked ok. So there must be some local issue.

 

I mean in standby.
With a friend's DM800 SE, it works.
What's strange is that I have the channels, but I do not have the picture on the screen.
The network works, since I have time, date and EPG

 

 

[Jork]

Hi, I installed and configured remotestreamconvert to duplicate the channels on another DM800 decoder in another room.

Everything happens normally, but the picture does not appear.

Thank you for your help.

There used to be a setting on the stb which acts as server for the second " include ECM in http streams" you should set this to disabled i guess if you decode the picture in the first stb.

I wonder if this is your case here?

Edited by Jork, 1 February 2018 - 21:00.

[Frenske]

I have tried with several images and boxes. You must have some weird local issue.

[lynyrd]

I have tried with several images and boxes. You must have some weird local issue.

 

"include ECM in http streams" is disabled

[Frenske]

I just installed remotestreamconverter, channel search via RSC and left all other things default. And this worked.
To be sure my suggestion would be to start from scratch and try again.

[lynyrd]

I just installed remotestreamconverter, channel search via RSC and left all other things default. And this worked.
To be sure my suggestion would be to start from scratch and try again.

 

I installed several times and download the channels, it does not change anything.
On the second receiver, I have the channels, the time, the date and the EPG, which is amazing, it is that the image does not appear.

[Frenske]

I’m lost so I’m afraid I’m out of ideas.

[lynyrd]

I’m lost so I’m afraid I’m out of ideas.

thanks anyway

[WanWizard]

Did you disable the local tuner? If not, the box thinks it can receive the channel locally and will not use the fallback tuner. The bouquets created by the Remote Stream Converter should work even with a local tuner active.

 

We're talking about an DM800 here I think (so no SE or otherwise). With OpenPLi 2.1? Or something else? Does that support what is needed to make this streaming work?

[lynyrd]

Did you disable the local tuner? If not, the box thinks it can receive the channel locally and will not use the fallback tuner. The bouquets created by the Remote Stream Converter should work even with a local tuner active.

 

We're talking about an DM800 here I think (so no SE or otherwise). With OpenPLi 2.1? Or something else? Does that support what is needed to make this streaming work?

 

With Openpli 4.0
I installed remotestreamconvert, which works.
If you look at the screenshots in the first topic, you will see that he sees the favorites of the server, he downloaded them, they are in the DM800, but the picture does not appear.

[WanWizard]

That doesn't say anything. the plugin simply retrieves the bouquet list using the web interface, and copies the bouquet files using FTP. That even works on a box that doesn't have any streaming capability.