Posted 28 February 2018 - 10:40
Excellent.
I will wait for results.
and while we're at it - I think there may be another issue with autotimer. If you modify a timer which is deactivated, do you by any chance reactivate them ?
As far as I can see, the autotimer can not activate the timer again.
He creates a new one.
Add a special tag to the deactivated timer and then check.
P.S.And thank you.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 2 March 2018 - 13:28
after 2 consecutive runs it's still looking good - I see no "double" timers for the next 3 days - I'll keep my eye on it but I think you can push this modification to the feeds.
as for the timers re-activation, not sure yet, could have been newly created "double" timers, giving the impression that a de-activated timer was re-activated again.
I'll give another update after the weekend.
Posted 2 March 2018 - 14:00
I already prepared a big patch.
1) Improved the logic of checking the existing timers.
2)...
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 2 March 2018 - 15:22
Would be cool if that would be ready before 6.2-release so it can be included. 
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 2 March 2018 - 18:16
I already prepared a big patch.
1) Improved the logic of checking the existing timers.
2)...
Also available in OpenPli 4?
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Posted 2 March 2018 - 19:02
I already prepared a big patch.
1) Improved the logic of checking the existing timers.
2)...Also available in OpenPli 4?
No, need to update the enigma.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 6 March 2018 - 11:01
OK - checked the timerlist again - by now all of the timers have been set by the modified autotimer script.
result : no more double timer entries to be found !
good job, dimitrij
Posted 7 March 2018 - 12:21
Hi Dimitrij,
Did your changed merged?
Thanks
Posted 7 March 2018 - 13:03
Yes. But they won't be available until 6.2-release, due to the depencies it has with Enigma.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 March 2018 - 13:14
and what's the big change ?
I'm asking as I went back from PLI 6 to PLI 4 as I was noticing problems with my db8000 with PLI6 (slowness, 2-3 blockages and/or reboots a week) - probably due to the lack of internal memory.
I'm quite happy as my system is now (even better after your last changes) so I'm not inclined to move to PLI 6.
so what will I be missing ?
Posted 7 March 2018 - 13:19
The discussion in this topic is about duplicate timer detection when a programme is updated in the EPG (i.e. starts sooner or later).
The Enigma dependency I mentioned is about additional selection criteria (end of title, etc), which requires an up-to-date Enigma ( = newer than in 6.1-release).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 2 guests, 0 anonymous users
