15 replies to this topic

[boldherri]

Hello guys, I have a big problem that I have for a few days, when I start a new recording while it is recording if I change the channel I get a popup with a written Synopsia failed and no channels are visible, while if I remove the recording all the channels are ok and they are seen. this fact never happened to me, yet the recording does it correctly, the image is very good, have the problem when i change transponders. I tried to change the settings but the problem remains, I also flashato once but I can not solve, someone knows what could be the problem?

[twol]

Receiver name, tuner type(s), number, tuner config????????????
When was last update.
Some info would help!

Edited by twol, 1 March 2018 - 14:35.

[boldherri]

Receiver name, tuner type(s), number, tuner config????????????
When was last update.
Some info would help!

Hello twol, yes, i have a Xtrend et9200 with Openpli 4 updated, my tuner configuration is this:

https://imgur.com/a/57en6

I have no problems with the signal of the parable which is excellent,

I have this problem when i start a recording on a bouquet for example Rai television and after starting the recording if i change channels on a bouquet for example RSI or another bouquet the channels are not seen and i get the message tuning failed.

[anudanan]

Did you use a loop through cable from output tuner A to input Tuner B? The tuners don´t have an internal connection

 

Tuner B is also configured for unicable with a different SCR?

[twol]

... but unless I am missing something, you only have 1 path, so can only watch or record ... not both, unless on same transponder

[boldherri]

Did you use a loop through cable from output tuner A to input Tuner B? The tuners don´t have an internal connection

 

Tuner B is also configured for unicable with a different SCR?

The Tuner B is configured equal to tuner A,

the antenna cable is connected to a switch with 4 outputs but i only have a connected cable that comes down to the decoder.,

I tried to change the scr 1/2/3/4 but it does not resolve, I also tried to connect the antenna cable to the tuner B of the decoder but the problem remains

[boldherri]

... but unless I am missing something, you only have 1 path, so can only watch or record ... not both, unless on same transponder

yes, but i remember that a few years ago was fine and i had no problems, I could record and watch another channel

[twol]

 

Did you use a loop through cable from output tuner A to input Tuner B? The tuners don´t have an internal connection

 

Tuner B is also configured for unicable with a different SCR?

The Tuner B is configured equal to tuner A,

the antenna cable is connected to a switch with 4 outputs but i only have a connected cable that comes down to the decoder.,

I tried to change the scr 1/2/3/4 but it does not resolve, I also tried to connect the antenna cable to the tuner B of the decoder but the problem remains

 

You need tuner A & B with different scr's

[boldherri]

 

 

Did you use a loop through cable from output tuner A to input Tuner B? The tuners don´t have an internal connection

 

Tuner B is also configured for unicable with a different SCR?

The Tuner B is configured equal to tuner A,

the antenna cable is connected to a switch with 4 outputs but i only have a connected cable that comes down to the decoder.,

I tried to change the scr 1/2/3/4 but it does not resolve, I also tried to connect the antenna cable to the tuner B of the decoder but the problem remains

 

You need tuner A & B with different scr's

 

ok thanks, I'll do some tests and then I'll let you know

[boldherri]

Hello guys, I tried various configurations of the tuner but the problem is not solved, do you have any idea please?

[Pr2]

If you use in the setup: Tuner B equal Tuner A then you need to have 2 cables connected one for each tuner.

This setup means: I have 1 dedicated cable per tuner but both tuner have exactly the same settings.

 

If you have only 1 cable then you need to use the Tuner B loop through Tuner A and connect the external loopback cable from Tuner A Out to Tuner B in (the loopback cable was provided with the ET-9200).

 

Pr2 

[boldherri]

If you use in the setup: Tuner B equal Tuner A then you need to have 2 cables connected one for each tuner.

This setup means: I have 1 dedicated cable per tuner but both tuner have exactly the same settings.

 

If you have only 1 cable then you need to use the Tuner B loop through Tuner A and connect the external loopback cable from Tuner A Out to Tuner B in (the loopback cable was provided with the ET-9200).

 

Pr2 

Hello P'r2, i understand, so i have to add a little cable from Tuner A Out to Tuner B,

 

I thank you so much and i will do this test.

[anudanan]

correctly. I´ve post that in post 4

 

 

Did you use a loop through cable from output tuner A to input Tuner B? The tuners don´t have an internal connection

 

Tuner B is also configured for unicable with a different SCR?

[Pr2]

 

correctly. I´ve post that in post 4

 

 

Did you use a loop through cable from output tuner A to input Tuner B? The tuners don´t have an internal connection

 

Tuner B is also configured for unicable with a different SCR?

 

 

Yes but even by placing the cable loopback, if the setup is equal to and not loopthrough it won't work.

Edited by Pr2, 2 March 2018 - 15:04.

[anudanan]

yes, I haven´t written that in my post

[boldherri]

guys, a big thanks to @Pr2, with this solution I no longer have the problem, I just tried and now i can watch a program on a bouquet and record another program on a different bouquet.

 

I added this cable as suggested by Pr2

https://imgur.com/a/Of1TO

and i set the tuner b in loop through and now is all ok, work perfect.