Posted 10 March 2018 - 07:08
I have a Vu+ Solo SE running the latest image, with a CI and a valid subscriber card.
All my channels on DVB-S work fine, but any channel on DVB-S2 just shows a black screen and no audio.
No error from the CI or anything.
Does anybody know why this would happen?
Posted 10 March 2018 - 10:34
Try a FTA service first. What is the reception quality (SNR)?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 10 March 2018 - 15:09
FTA DVB-S2 is fine and signal is fine as well works on another receiver.
Posted 10 March 2018 - 19:58
Does anybody know what channels, satellite or card you are talking about?
Posted 11 March 2018 - 07:03
You probably needs to enable the high bit rate option on your CI module.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 March 2018 - 09:17
You probably needs to enable the high bit rate option on your CI module.
I thought it might be that as well I already tried that.
Does anybody know what channels, satellite or card you are talking about?
Not relevant, ci is a smit professional module which has been confirmed to work in the past and in other receivers.
Edited by nullb, 11 March 2018 - 09:19.
Posted 11 March 2018 - 09:48
Is it a CI+ module?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 11 March 2018 - 11:22
For DVB-S2 be sure that high bit rate must be set to ON.
Did you use both a softcam (OScam, CCcam,...) at the same time as your module? If so please stop your softcam and test only with the CI Module.
Also remove and replug the module to reinitialise it.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 March 2018 - 13:55
For DVB-S2 be sure that high bit rate must be set to ON.
Did you use both a softcam (OScam, CCcam,...) at the same time as your module? If so please stop your softcam and test only with the CI Module.
Also remove and replug the module to reinitialise it.
High bitrate is defiantly on, and never used a soft cam just a valid card and ci from subscriber.
Posted 11 March 2018 - 21:45
Can you please reply to this then:
Is it a CI+ module?
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 12 March 2018 - 02:40
No it's just a regular old CI module, it's like 7+ years old.
Tried some more stuff.
I flashed BH and still had the same issue.
Flashed OpenVIX and v4 just shows black same as the others, but v5 shows me a tuner configuration issue and the only those DVB-S2 channels are grayed out on the guide.
I'm really not sure what's going on, I know the feed is coming in since the bitrate viewer extension shows a bitrate and if I stream it into TSReader I see the feeds and PMT (It's still not decoding in TSReader either black screen)
I also tried a FTA DVB-S2 channel and that displays fine so it's not my tuner not supporting DVB-S2 or something.
Oh I'm blind scanning to find these channels so I double checked the DVB-S2 channels are being idenfied as 20 HDTV not a data channel as well, even tried switching them to TV id as well no dice.
Edited by nullb, 12 March 2018 - 02:45.
Posted 12 March 2018 - 08:57
I have a work around it's very strange....
Zap to HD channel, start stream to TSReader, scrambled channel.
Zap to SD channel, leave TSReader open on HD.
TSReader which was left open starts to show picture no longer scrambled for HD channel, Vu+ is black on the TV though, shows as being on the SD channel.
(SD and HD are on the same MUX)
This really seems like some kind of a software bug with the CI interface or something, I can't understand it or explain it. I'm at a loss.
Edited by nullb, 12 March 2018 - 09:01.
Posted 12 March 2018 - 09:21
Posted 12 March 2018 - 11:08
CI is working fine trust me, works fine in another receiver.
Tried that as well no dice, the problem is it's a total black screen, there's no error there's nothing to point me in the direction of something to debug.
If the CI was erroring I'd get an on screen message about the channel being blocked or the smart card being invalid.
I removed some DVB-S2 channels from my package and the CI instantly errored about them being blocked services, then I added them back and the error went away and still the same black screen.
Posted 12 March 2018 - 13:13
Posted 12 March 2018 - 13:22
I've already said which CI it is and the provider and channels wont help, since I doubt anybody around these parts would have that provider.
I'm being evasive due to the way the provider responds to people who have used 3rd party receivers in the past, but I'm paying for the subscription more than $100 a month, I should be able to use whatever receiver I want since the ones they provide are complete trash.
If it becomes necessary to provide that information I will to a dev in PM and I'm more than willing to work on a fix myself and send a pull request, but before I go spinning my wheels doing that I want to see if it's something else I may have missed.
Posted 12 March 2018 - 13:29
Posted 13 March 2018 - 05:01
In that case you are better off with a forum/community that covers your region. In these posts I cannot find any info about your CI (other than you stating it's an old CI and definately no CI+). Those HD channels are probably send in a non-DVB standard for a reason. Since it is not in our region (we cannot receive them) it stops here..
I can just provide dumps but they're to specification. They aren't muli-stream ect I've checked, you're not talking to a layman here I've committed code to the project before and if I need to I will again to fix this.
The only thing that was a little odd is the DVB-S2 channels are beamed twice with multiple service ids.
As I said it's a SMiT professional CAM, the provider I'm talking about is in your region and uses the same encryption as Sky NZ but it's not Sky.
Maybe now you can see my hesitation in mentioning it by name on a public forum.
I'm just trying to rule out some known issue or some setting I missed, like the "VU+ Solo2 CI High Bitrate" problem from 2014 I'm pretty sure that's been fixed in the drivers and images by now though. I flashed the work around anyway just in case didn't fix it.
Edited by nullb, 13 March 2018 - 05:02.
0 members, 1 guests, 0 anonymous users
