54 replies to this topic

[Melgas]

Hello.

I'll try to check.

I understand that the "IP Address" will be the IP of the Box.

Thank you.

Edited by Melgas, 20 September 2018 - 14:15.

[WanWizard]

Yes.

 

The port used is defined in the cccam.cfg file, it is the port the CCcam web interface listens on. You can check that with your browser.

[Melgas]

Hello.

CCcam-Info.

It had this setting: "using old profile":

http://root:dreambox@127.0.0.1:16001

#

I have a Box with this IP: 192.168.1.80

The port is: 16001.

#

You should then:

http://root:dreambox....168.1.80:16001

#

I tried to change:

In "remote box / new", I put the IP of the box: 192.168.1.80

But do not keep that full address.

It should look like this:

http://root: dreambox@192.168.1.80:16001

But I do not know how to do that.

#

Result:

There is no mistake.

But it does not display any information on "clients" or "servers", for example.

#

What should I do?

I await information.

Thank you.

[WanWizard]

If you go to http://192.179.1.80:16001 in your browser, does it work, prompt for a login, and does it accept "root" as user and "dreambox" as password?

[Melgas]

Hello.

In my browser I put:

http://192.168.1.80:16001/servers

It requests a login and accepts "root" as user and "dreambox" as password.

Displays all servers.

In the application, CCcam-Info, I now get this error:

"ERROR READING WEBPAGE!"

#

I do not understand.

I do not know where else to correct.

Help me.

Thank you.

[WanWizard]

No clue, you have have configured server IP "192.168.1.80" (or "127.0.0.1"), and port 16001, and the correct username and password (make sure you do this, no matter what is displayed), it should work.

 

it's not our plugin, we don't have the source code, and we don't maintain it, so if something is wrong, the author needs to fix it. But I don't think so, as nobody else complains about it.

[Melgas]

Hi.

I have this setting in CCcam-Info - "profile":

http://root:dreambox....168.1.80:16001

It is correct with the IP of my box.

#

In my CCcam, I have this setting:

#

SERVER LISTEN PORT: 54454

ALLOW TELNETINFO: yes

ALLOW WEBINFO: yes

WEBINFO USERNAME: root

WEBINFO PASSWORD: dreambox

WEBINFO LISTEN PORT: 16001

TELNETINFO USERNAME: root

TELNETINFO PASSWORD: dreambox

TELNETINFO LISTEN PORT: 16000

ZAP OSD TIME: 0

OSD USERNAME: root

OSD PASSWORD: dreambox

OSD PORT: 80

SHOW TIMING: yes

DEBUG: yes

NEWCAMD CONF: no

#DISABLE EMM: yes

#EXTRA EMM LEVEL: yes

SHOW EXTENEDED CLIENT INFO: yes

MINI OSD: no

#MINIMUM DOWNHOPS: 1

CHANNELINFO FILE: /var/etc/CCcam.channelinfo

PROVIDERINFO FILE: /var/etc/CCcam.providers

CAUSE PRIO FILE: /var/etc/CCcam.prio

LOG WARNINGS: /var/log/warnings.txt

SOFTKEY FILE: /var/keys/SoftCam.Key

#AUTOROLL FILE: /var/keys/AutoRoll.Key

STATIC CW FILE: /var/keys/constant.cw

#BOXKEY: / dev / sci0 12 34 56 78

#SMARTCARD CLOCK FREQUENCY: / dev / sci0 3750000

#

Is this setting wrong?

Can you help me please?

Thank you.

[WanWizard]

This looks fine, the problem is in the plugin configuration.

[Melgas]

Hi.

I can not figure out where the error is.

The configuration of CCcam-Info is correct like this:

http: // root: dreambox @ 192.168.1.80:16001

And putting this address in the browser, it shows all the servers:

http://192.168.1.80:16001/servers

#

I'll give up. I'll uninstall.

Sorry for the inconvenience.

Thank you.

[Melgas]

Hi.

SORTED OUT

I uninstalled the online version of OPenPLi 6.2 and installed this version:

enigma2-plugin-extensions-cccaminfo_svn-3385-r0_mips32el

#

The problem is with OPenPLi and CCcam-Info 1.4 available.

#

For now I have my problem solved.

With this CCcam-Info 1.3 is working well.

Thanks for everything.

Hugs.

[takub]

 

Hi.

SORTED OUT

I uninstalled the online version of OPenPLi 6.2 and installed this version:

enigma2-plugin-extensions-cccaminfo_svn-3385-r0_mips32el

#

The problem is with OPenPLi and CCcam-Info 1.4 available.

#

For now I have my problem solved.

With this CCcam-Info 1.3 is working well.

Thanks for everything.

Hugs.

 

Hi, can you help me out!!!

I have openpli 6.2 on vu+ uno4kse and the CCcaminfo from 

enigma2-plugin-extensions-cccaminfo_svn-3385-r0_mips32el.ipk

returns

Error reading webpage!

when I click on the general tab on my screen

 

thanx a million in advance

[WanWizard]

I just installed CCcam 2.3.2 from the feed, installed CCcamInfo from the feed, started CCcamInfo from the plugin screen, works fine.

 

From what I can see, the option "Local box" assumes CCcam runs on 127.0.0.1 (localhost), port 16001, and no authentication enabled. And I can't see where to enter that.

 

So if you have a password on your CCcam web interface, or you have it on a different port, you need to press Yellow, and press Green to make a custom box configuration.

[Melgas]

Hi takub

It was this setup that I had to do. As the Moderator "WanWizard". says.

In my case, I had to install the version indicated by me.

And it's working.

Good luck.

[takub]

 

Hi takub

It was this setup that I had to do. As the Moderator "WanWizard". says.

In my case, I had to install the version indicated by me.

And it's working.

Good luck.

 

Hi Melgas,

thanx for your response,

I still cannot get it to work.

If I may ask, could you please give me sample configs of cccam.cfg and cccaminfo - plugin.py

thanx

[WanWizard]

If you install CCcam, a sample cccam.cfg in installed as well.

 

If your cccam.cfg has a web interface password defined, in cccaminfo you need to create a new "remote" server in the menu, with IP 127.0.0.1, and the correct port (default: 16001), username and password.