13 replies to this topic

[kaffekop]

Problems with recording to NAS server.
It's come after I've updated to 6.1

I updated from 4.0

<Cifs>
  <Mount>
   <Active> True </ active>
   <Hdd_replacement> True </ hdd_replacement>
   <Ip> 192.168.1.2 </ ip>
   <Share name> Dream </ share name>
   <Sharedir> Dream </ sharedir>
   <Options> rw </ options>
   <Username> Dream </ username>
   <Password> 01234 </ password>
  </ Mount>
</ CIFS>

[WanWizard]

What is your NAS server? Has it had a security upgrade to disable SMBv1 by any chance?

[kaffekop]

Nas server

DS412+

DSM 6.1.5-15254

Update 12018/02/26

 

 

The last time I recorded was 25/3
so nothing has happened to the server since then

 

If I use openwebif and change:
Location: from default
to
Location: / hdd / movie

So it works.

Is there a place where I can set the hdd placement.

I can easily access all my shares have 5 pieces.

this problem is valid for my two vu + one Vu + Solo SE and Vu + Solo²

[WanWizard]

The Samba vulnerability that disabled SMB v1 was fixed in DSM 6.1.5-15254, which was released on January 31st. You can check if SMBv1 is disabled via:

 

 

 

If the minumum version is indeed set to SMBv2, you need to change

 <Options> rw </ options>

to 

 <Options> rw,vers=2.0,cache=none </ options>

[kaffekop]

SMBv1 is turned on

Attached Files

•  nas.png   319.94KB   1 downloads

[WanWizard]

Set the maximum to SMB2 or SMB3, now you block clients that don't want to use SMBv1.

[kaffekop]

I still can not make it work. have tried almost everything.
have updated my ASUS router ac68
but now I'm sure there are some ports for the cifs share I have to open.
but I can still use all my shared folders.
but I can not record

[WanWizard]

I don't know, this is my setting:

 Screenshot from 2018-04-05 20-32-57.png   46.25KB   1 downloads

 

And this mounts fine:

 Screenshot from 2018-04-05 20-37-30.png   34.63KB   1 downloads

[mymon]

kaffekop how do you mount the NAS drive?

share your [mount -a] result

[kaffekop]

Can you please guide me?
How do I do which commands should I write I use dcc 2.7
Normally I have just made mount via the interface in the user menu. and when I have made a new update of my VU + I have just copied automount.xml over and it has always worked. but not now.

What's strange is that I can see and play everything in my network share, but I can not record / save in the folder that's set up for HDD replacement, but the movies I have in that folder can I easily play ..

 

the mystery continues

[mymon]

share the result of 

mount -a

Mounting through the network wizzard never worked well for me with Win7-10

I use fstab for it and works every time.. once you share the above I can provide you with line to add the /etc/fstab

[kaffekop]

vusolose login: root
Password:
root@vusolose:~# mount -a
root@vusolose:~# mount -a
root@vusolose:~# mount -a
root@vusolose:~# mount
rootfs on / type rootfs (rw)
ubi0:rootfs on / type ubifs (rw,sync,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=335652k,nr_inodes=83913,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /media type tmpfs (rw,relatime,size=64k)
tmpfs on /var/volatile type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
//192.168.1.2/Dream on /media/net/Dream type cifs (rw,noatime,vers=1.0,cache=strict,username=Dream,domain=DISKSTATION,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.2,iocharset=utf8,unix,posixpaths,acl,rsize=1048576,wsize=1048576,actimeo=1)
//192.168.1.2/video on /media/net/video type cifs (rw,noatime,vers=1.0,cache=strict,username=Dream,domain=DISKSTATION,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.2,iocharset=utf8,unix,posixpaths,acl,rsize=1048576,wsize=1048576,actimeo=1)
//192.168.1.2/william on /media/net/William type cifs (rw,noatime,vers=1.0,cache=strict,username=dream,domain=DISKSTATION,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.2,iocharset=utf8,unix,posixpaths,acl,rsize=1048576,wsize=1048576,actimeo=1)
//192.168.1.2/video on /media/net/Nye Film type cifs (rw,noatime,vers=1.0,cache=strict,username=Dream,domain=DISKSTATION,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.2,iocharset=utf8,unix,posixpaths,acl,rsize=1048576,wsize=1048576,actimeo=1)
//192.168.1.2/Danske Film on /media/net/Danske Film type cifs (rw,noatime,vers=1.0,cache=strict,username=Dream,domain=DISKSTATION,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.2,iocharset=utf8,unix,posixpaths,acl,rsize=1048576,wsize=1048576,actimeo=1)
//192.168.1.2/test on /media/net/test type cifs (rw,noatime,vers=1.0,cache=strict,username=Dream,domain=DISKSTATION,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.2,iocharset=utf8,unix,posixpaths,acl,rsize=1048576,wsize=1048576,actimeo=1)
//192.168.1.2/tv on /media/net/Tv type cifs (rw,noatime,vers=1.0,cache=strict,username=dream,domain=DISKSTATION,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.2,iocharset=utf8,unix,posixpaths,acl,rsize=1048576,wsize=1048576,actimeo=1)
root@vusolose:~#

Edited by kaffekop, 8 April 2018 - 10:49.

[mymon]

it seems OK so maybe the SMB version issue or the mount location issue

unmount via menager

create NAS folder with the below command

mkdir /hdd/movie/NAS/video 

and add the below to /etc/fstab as per example

//192.168.1.2/video /hdd/movie/NAS/video               cifs       rw,username=XXX,password=XXX,_netdev            0  0

reboot the tuner and see if can write on it

[WanWizard]

The mounts are all ok, and all rw.

 

So if you can read but can't write, it's a security configuration on the NAS that is not correct.