Openpli 6.2 rc?

Started by fidelcastro54, 01 Apr 2018 06:58

«
Prev

Next

Please log in to reply

120 replies to this topic

Re: Openpli 6.2 rc? #101 Akki

Senior Member
204 posts

+3

Neutral

Posted 19 May 2018 - 17:16

Soo now I have been lucky again.

I was in the channel list and scrolled down, with about 1000 entries (IPTV) it takes time and then it also hacks from time to time.

I then confirmed a channel with OK and then the GS came.

stbmodel=duo2
stbmodel=dm8000
kernelcmdline=libata.force=1:1.5Gbps bmem=192M@64M bmem=220M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
nimsockets=NIM Socket 0:
imageissue=openpli 6.2-release %h


REMOVE Peer vuduo2
REMOVE Peer vuduo2
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBPESReader] ERROR reading PES (fd=54): Value too large for defined data type
[eDVBPESReader] ERROR reading PES (fd=54): Value too large for defined data type
[eDVBPESReader] ERROR reading PES (fd=54): Value too large for defined data type
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
[eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
PC: 76127830
    00000000 ffffffff 00000000 7fbde958
    00000003 7fbde958 00000000 00000000
    00000000 fffffffc ce449dc0 cde4e3e0
    00100073 7714c000 00000000 6bccacf8
    00000000 7fbde958 76277000 7fbdea88
    6bccacf8 00000000 00000000 7412c670
    76147194 76127760 00000010 00000000
    7627de00 7fbde8d0 00000002 761291a4
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x462E2C]
/lib/libc.so.6(gsignal) [0x76127832]
-------FATAL SIGNAL

Maybe the box can't process the fast scrolling so fast if you press ok afterwards and Enigma2 crashes???????

Re: Openpli 6.2 rc? #102 WanWizard

PLi® Core member
70,396 posts

+1,807

Excellent

Posted 19 May 2018 - 17:44

Can you login, stop enigma with "init 4", then start again with "ENIGMA_DEBUG_LVL=4 enigma2", retry it, and post the result again if it crashes?

You can go back to watching TV with "init 3".

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Openpli 6.2 rc? #103 Akki

Senior Member
204 posts

+3

Neutral

Posted 19 May 2018 - 18:35

I will try @WanWizard to force the GS again

Re: Openpli 6.2 rc? #104 Akki

Senior Member
204 posts

+3

Neutral

Posted 19 May 2018 - 18:52

I hope you can do something with it.

Attached Files

ENIGMA_DEBUG_LVL=4.log 150.57KB 7 downloads

Re: Openpli 6.2 rc? #105 WanWizard

PLi® Core member
70,396 posts

+1,807

Excellent

Posted 19 May 2018 - 19:56

Same issue I observed. First, you get to a stream that generates a lot of these

[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout
[eFilePushThread] wait for driver eof timeout

after which it crashes on the next zap:

PC: 769fb91c
    00000000 00000001 76afd8e8 76afe060
    00000000 6b6a07b0 00000002 76aca000
    76afd8e8 00000073 00000001 00000007
    00000023 00000000 00000020 00000026
    00345678 6b6b4ae0 000f4243 00000004
    00000001 00014256 ffffffff 00000010
    00000003 769fb8fc 76afd8e8 00000000
    76b1efb0 7feaf4e8 76a5a000 76a12a28
Backtrace:
enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x462E2C]
/usr/lib/libpython2.7.so.1.0(PyObject_Hash) [0x769FB91E]
-------FATAL SIGNAL
Fatal Python error: GC object already tracked
PC: 764f7830
    00000000 ffffffff 00000000 7feae680
    00000003 7feae680 00000000 00000000
    00050050 00000000 001531bc 00000000
    00000030 00000000 00000013 76a81a0c
    00000000 7feae680 76647000 7feae7b0
    00000004 746ef0c0 00000000 006eb910
    00000000 764f7760 00000010 00000000
    7664de00 7feae5f8 00000004 764f91a4
Backtrace:
enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x462E2C]
/lib/libc.so.6(gsignal) [0x764F7832]
-------FATAL SIGNAL
Aborted

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Openpli 6.2 rc? #106 Akki

Senior Member
204 posts

+3

Neutral

Posted 19 May 2018 - 23:02

And is there any chance that you could block the crash with a patch or something else?

Re: Openpli 6.2 rc? #107 littlesat

PLi® Core member
57,120 posts

+698

Excellent

Posted 19 May 2018 - 23:07

Only when we find the cullpit

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W

Re: Openpli 6.2 rc? #108 honda-civic

Senior Member
307 posts

+22

Neutral

Posted 20 May 2018 - 09:55

Today actualy update and again crash

stbmodel=duo2

stbmodel=dm8000

kernelcmdline=libata.force=1:1.5Gbps bmem=192M@64M bmem=220M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync

nimsockets=NIM Socket 0:

imageissue=openpli 6.2-release %h

REMOVE Peer vuduo2

[eDVBPESReader] Created. Opening demux

[eDVBPESReader] ERROR reading PES (fd=61): Value too large for defined data type

[eDVBPESReader] Created. Opening demux

PC: 7740c978

00000000 00000001 00000000 00000000

726cdc90 00000000 007e8b54 774ad8e8

774ad8e8 00000fa5 800e13f8 0000002b

00000019 00000160 0000002d 00000005

726cdc90 007e8bc0 00000002 00000000

006ea778 774a9ba0 71467880 73d30b30

76eecf18 7740c8e4 000001b6 00000000

774cefb0 7fd5d0b0 00000002 774111ec

Backtrace:

/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x462D4C]

/usr/lib/libpython2.7.so.1.0(PyEval_EvalFrameEx) [0x7740C97A]

-------FATAL SIGNAL

dmesg

<4>[VID]: VIDEO_SET_STREAMTYPE 1

<4>[VID]: VIDEO_SELECT_SOURCE 1 0

<4>[VID]: VIDEO_PLAY 1 5 0

<4>[VID]: VIDEO_CONTINUE 1 1

<4>[VID]: VIDEO_CLEAR_BUFFER 1 1 0

<4>[VID]: VIDEO_STOP 0 1

<4>[VID]: VIDEO_SELECT_SOURCE 0 0

<3>UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16

<4>[AUD]: AUDIO_SET_MUTE 0

<4>[AUD]: AUDIO_SET_MIXER -815399440

<4>[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0

<4>[AUD]: AUDIO_SET_MIXER : next left volume -3927, right volume -3927

<4>[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

<4>[AUD]: AUDIO_SET_MIXER -815399440

<4>[AUD]: AUDIO_SET_MIXER : amixl 54, amixr 54

<4>[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

<4>[AUD]: AUDIO_SET_MIXER : next left volume -3927, right volume -3927

<4>FE tune

<4>[AUD]: AUDIO_SELECT_SOURCE 0

<4>[AUD]: AUDIO_SET_BYPASS_MODE 1

<4>[AUD]: downmix 0 state : 0

<4>[AUD]: AUDIO_PAUSE 1

<4>[AUD]: AUDIO_PLAY 1 decoder start : 0

<4>[VID]: VIDEO_SELECT_SOURCE 0 0

<4>[VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080

<4>[VID]: VIDEO_GET_SIZE aspect: 1 6

<4>[VID]: VIDEO_SET_STREAMTYPE 1

<4>[VID]: VIDEO_FREEZE 2144725856 0

<4>[VID]: VIDEO_PLAY 2144725856 5 2

<4>[VID]: VIDEO_SLOWMOTION 0 1

<4>[VID]: VIDEO_FAST_FORWARD 0 1

<4>[VID]: VIDEO_CONTINUE 0 1

<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xca835a00

<4>[AUD]: Mute : 0

<4>[AUD]: AUDIO_CHANNEL_SELECT 0

<4>[AUD]: AUDIO_STOP 0

<4>[AUD]: AUDIO_CONTINUE 0 0 aph=0x0

<4>[AUD]: AUDIO_CONTINUE aph=0 0 0

<4>[AUD]: AUDIO_SELECT_SOURCE 0

<4>[AUD]: AUDIO_SET_BYPASS_MODE 0

<4>[AUD]: AC3 downmix 0 state : 0

<4>[AUD]: AUDIO_PAUSE 0

<4>[AUD]: AUDIO_PLAY 0 decoder start : 0

<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xca847780

<4>[AUD]: Mute : 0

<5>EXT4-fs (sda1): error count: 642

<5>EXT4-fs (sda1): initial error at 1474374260: mb_free_blocks:1433: block 57356

<5>EXT4-fs (sda1): last error at 1526759224: ext4_mb_generate_buddy:756

<4>[VID]: VIDEO_STOP 1 1

<4>[AUD]: AUDIO_STOP -2

<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0

<4>[AUD]: AUDIO_CONTINUE aph=0 0 0

<4>[AUD]: AUDIO_SELECT_SOURCE 0

<4>[AUD]: AUDIO_SET_BYPASS_MODE 8

<4>[AUD]: AAC downmix 0 state : 0

<4>[AUD]: AUDIO_PAUSE 8

<4>[AUD]: AUDIO_PLAY 8 decoder start : 0

<4>[VID]: VIDEO_SELECT_SOURCE 0 0

<4>[VID]: VIDEO_SET_STREAMTYPE 1

<4>[VID]: VIDEO_FREEZE 2144721712 0

<4>[VID]: VIDEO_PLAY 2144721712 5 2

<4>[VID]: VIDEO_SLOWMOTION 0 1

<4>[VID]: VIDEO_FAST_FORWARD 0 1

<4>[VID]: VIDEO_CONTINUE 0 1

<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xca89cc80

<4>[AUD]: Mute : 0

<4>[VID]: VIDEO_GET_SIZE src w: 720 h:576 display w:720 h:576

<4>[VID]: VIDEO_GET_SIZE aspect: 1 6

<4>[VID]: VIDEO_STOP 1 1

<4>[AUD]: AUDIO_STOP -2

<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0

<4>[AUD]: AUDIO_CONTINUE aph=0 0 0

<4>[AUD]: AUDIO_SELECT_SOURCE 0

<4>[AUD]: AUDIO_SET_BYPASS_MODE 8

<4>[AUD]: AAC downmix 0 state : 0

<4>[AUD]: AUDIO_PAUSE 8

<4>[AUD]: AUDIO_PLAY 8 decoder start : 0

<4>[VID]: VIDEO_SELECT_SOURCE 0 0

<4>[VID]: VIDEO_SET_STREAMTYPE 1

<4>[VID]: VIDEO_FREEZE 2144721712 0

<4>[VID]: VIDEO_PLAY 2144721712 5 2

<4>[VID]: VIDEO_SLOWMOTION 0 1

<4>[VID]: VIDEO_FAST_FORWARD 0 1

<4>[VID]: VIDEO_CONTINUE 0 1

<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xca89b300

<4>[AUD]: Mute : 0

<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0

<4>[VID]: VIDEO_GET_SIZE aspect: 1 0

<4>[VID]: VIDEO_STOP 1 1

<4>[AUD]: AUDIO_STOP -2

<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0

<4>[AUD]: AUDIO_CONTINUE aph=0 0 0

<4>[AUD]: AUDIO_SELECT_SOURCE 0

<4>[AUD]: AUDIO_SET_BYPASS_MODE 8

<4>[AUD]: AAC downmix 0 state : 0

<4>[AUD]: AUDIO_PAUSE 8

<4>[AUD]: AUDIO_PLAY 8 decoder start : 0

<4>[VID]: VIDEO_SELECT_SOURCE 0 0

<4>[VID]: VIDEO_SET_STREAMTYPE 1

<4>[VID]: VIDEO_FREEZE 2144721720 0

<4>[VID]: VIDEO_PLAY 2144721720 5 2

<4>[VID]: VIDEO_SLOWMOTION 0 1

<4>[VID]: VIDEO_FAST_FORWARD 0 1

<4>[VID]: VIDEO_CONTINUE 0 1

<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xce3edb80

<4>[AUD]: Mute : 0

<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0

<4>[VID]: VIDEO_GET_SIZE aspect: 1 0

<4>[VID]: VIDEO_STOP 1 1

<4>[AUD]: AUDIO_STOP -2

<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0

<4>[AUD]: AUDIO_CONTINUE aph=0 0 0

<4>[AUD]: AUDIO_SELECT_SOURCE 0

<4>[AUD]: AUDIO_SET_BYPASS_MODE 8

<4>[AUD]: AAC downmix 0 state : 0

<4>[AUD]: AUDIO_PAUSE 8

<4>[AUD]: AUDIO_PLAY 8 decoder start : 0

<4>[VID]: VIDEO_SELECT_SOURCE 0 0

<4>[VID]: VIDEO_SET_STREAMTYPE 1

<4>[VID]: VIDEO_FREEZE 2144721720 0

<4>[VID]: VIDEO_PLAY 2144721720 5 2

<4>[VID]: VIDEO_SLOWMOTION 0 1

<4>[VID]: VIDEO_FAST_FORWARD 0 1

<4>[VID]: VIDEO_CONTINUE 0 1

<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xca89c080

<4>[AUD]: Mute : 0

<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0

<4>[VID]: VIDEO_GET_SIZE aspect: 1 0

<4>[VID]: VIDEO_STOP 1 1

<4>[AUD]: AUDIO_STOP -2

<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0

<4>[AUD]: AUDIO_CONTINUE aph=0 0 0

<4>[AUD]: AUDIO_SELECT_SOURCE 0

<4>[AUD]: AUDIO_SET_BYPASS_MODE 8

<4>[AUD]: AAC downmix 0 state : 0

<4>[AUD]: AUDIO_PAUSE 8

<4>[AUD]: AUDIO_PLAY 8 decoder start : 0

<4>[VID]: VIDEO_SELECT_SOURCE 0 0

<4>[VID]: VIDEO_SET_STREAMTYPE 1

<4>[VID]: VIDEO_FREEZE 2144721720 0

<4>[VID]: VIDEO_PLAY 2144721720 5 2

<4>[VID]: VIDEO_SLOWMOTION 0 1

<4>[VID]: VIDEO_FAST_FORWARD 0 1

<4>[VID]: VIDEO_CONTINUE 0 1

<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xce3ed600

<4>[AUD]: Mute : 0

<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0

<4>[VID]: VIDEO_GET_SIZE aspect: 1 0

<4>[VID]: VIDEO_STOP 1 1

<4>[AUD]: AUDIO_STOP -2

<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0

<4>[AUD]: AUDIO_CONTINUE aph=0 0 0

<4>[AUD]: AUDIO_SELECT_SOURCE 0

<4>[AUD]: AUDIO_SET_BYPASS_MODE 8

<4>[AUD]: AAC downmix 0 state : 0

<4>[AUD]: AUDIO_PAUSE 8

<4>[AUD]: AUDIO_PLAY 8 decoder start : 0

<4>[VID]: VIDEO_SELECT_SOURCE 0 0

<4>[VID]: VIDEO_SET_STREAMTYPE 1

<4>[VID]: VIDEO_FREEZE 2144721720 0

<4>[VID]: VIDEO_PLAY 2144721720 5 2

<4>[VID]: VIDEO_SLOWMOTION 0 1

<4>[VID]: VIDEO_FAST_FORWARD 0 1

<4>[VID]: VIDEO_CONTINUE 0 1

<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xce3edb80

<4>[AUD]: Mute : 0

<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0

<4>[VID]: VIDEO_GET_SIZE aspect: 1 0

<4>[VID]: VIDEO_STOP 1 1

<4>[AUD]: AUDIO_STOP -2

<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0

<4>[AUD]: AUDIO_CONTINUE aph=0 0 0

Re: Openpli 6.2 rc? #109 betacentauri

PLi® Core member
7,185 posts

+323

Excellent

Posted 20 May 2018 - 10:22

I can now reproduce it, too. I can create a core file but the debugger don't show something interesting:

(gdb) bt
#0  0xb6721a30 in ?? ()
#1  0xb67219f8 in ?? ()
Backtrace stopped: previous frame identical to this frame (corrupt stack?)

Using valgrind I cannot reproduce the error.

Ich kann es jetzt reproduzieren. Ich kann auch ein Core erstellen, aber der Debugger zeigt nichts brauchbares an. Mit Valgrind kann ich das Problem nicht reproduzieren.

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Openpli 6.2 rc? #110 betacentauri

PLi® Core member
7,185 posts

+323

Excellent

Posted 21 May 2018 - 20:11

Der Bug wurde gefunden und behoben. Bitte nach dem nächsten Build mal testen.

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Openpli 6.2 rc? #111 FendiMan

Senior Member
87 posts

+2

Neutral

Posted 24 May 2018 - 20:01

Ich habe in den letzten Tagen auf drei VU+Duo2 das 6.1 Image installiert, bei zweien davon auch gleich ein Update auf 6.2 gemacht.

Grundsätzlich läuft das 6.2 ganz normal.

Eine Kleinigkeit ist mir aufgefallen:

Im Einfach-EPG fehlt die Anzeige der Farbtasten am unteren Rand.

In den Einstellungen habe ich dazu nichts gefunden.

Beim Multi-EPG sind die Farbtasten vorhanden.

Skin: SwainHD

Attached Files

EPG_OpenPLI-6.2.jpg 76.27KB 2 downloads

Gruß FendiMan

Gigablue UHD Quad 4k, 2 x VU+Duo2, DM8000

Re: Openpli 6.2 rc? #112 Frenske

Forum Moderator
PLi® Core member
27,489 posts

+397

Excellent

Posted 24 May 2018 - 20:24

Das muss ein Skin relatierter Fehler sein. Versuche dies mal mit dem standard Skin?

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: Openpli 6.2 rc? #113 FendiMan

Senior Member
87 posts

+2

Neutral

Posted 24 May 2018 - 20:33

Im Moment laufen gerade Aufnahmen, da kann ich den Skin nicht wechseln.

Beim 6.1 war das noch nicht der Fall, da schaut das ganz normal aus.

Die Tasten funktionieren auch ganz normal, beim 6.2 ohne Anzeige genauso wie beim 6.1 mit Anzeige.

Attached Files

EPG_OpenPLI-6.1.jpg 131.55KB 1 downloads

Edited by FendiMan, 24 May 2018 - 20:35.

Gruß FendiMan

Gigablue UHD Quad 4k, 2 x VU+Duo2, DM8000

Re: Openpli 6.2 rc? #114 Frenske

Forum Moderator
PLi® Core member
27,489 posts

+397

Excellent

Posted 24 May 2018 - 20:42

I.b.z die Tasten hat sich da was geändert also müsste der bestimmte Skin geändert werden vermute ich.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: Openpli 6.2 rc? #115 FendiMan

Senior Member
87 posts

+2

Neutral

Posted 24 May 2018 - 21:08

In der Übersicht der Aufnahmen (Filmauswahl) sind die Tasten ganz normal vorhanden.

Gruß FendiMan

Gigablue UHD Quad 4k, 2 x VU+Duo2, DM8000

Re: Openpli 6.2 rc? #116 betacentauri

PLi® Core member
7,185 posts

+323

Excellent

Posted 25 May 2018 - 05:39

Liegt trotzdem am Skin. Es gab da Änderungen. Deswegen muss der Skin angepasst werden.

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Openpli 6.2 rc? #117 honda-civic

Senior Member
307 posts

+22

Neutral

Posted 25 May 2018 - 08:03

Richtig,und pass keiner,jeder muss angepasst werden

Re: Openpli 6.2 rc? #118 mikel

Senior Member
441 posts

0

Neutral

Posted 3 June 2018 - 14:26

Hallo,

HBBTV wird prozentual zu groß dargestellt (aufgezoomt), liegt das auch am Skin?

Habe eine ET9000, beim Image 4.0 ist alles normal, verwende normalen Skin pli HD der bereits im Image integriert ist.

Wie kann ich das anpassen oder ist es ein Fehler im Image?

Danke

Gruß Mikel

Re: Openpli 6.2 rc? #119 mikel

Senior Member
441 posts

0

Neutral

Posted 3 June 2018 - 17:23

Das gleiche Problem bleibt auch beim openpli-6.2-release-et9x00 Image, HBBTV wird zu groß dargestellt (aufgezoom), wollte nur keinen neuen Beitrag anlegen.

Mikel

Re: Openpli 6.2 rc? #120 Frenske

Forum Moderator
PLi® Core member
27,489 posts

+397

Excellent

Posted 3 June 2018 - 19:51

Mit einem SD skin hast du dieses Problem nicht so weit ich mich erinnere.
Es gibt aber auch eine Lösung aber die kann ich bis jetzt nicht finden.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

«
Prev

Next

Back to [DE] Benutzerunterstützung

16 user(s) are reading this topic

0 members, 16 guests, 0 anonymous users

ATTENTION !!!

Openpli 6.2 rc?

Re: Openpli 6.2 rc? #101 Akki

Re: Openpli 6.2 rc? #102 WanWizard

Re: Openpli 6.2 rc? #103 Akki

Re: Openpli 6.2 rc? #104 Akki

Attached Files

Re: Openpli 6.2 rc? #105 WanWizard

Re: Openpli 6.2 rc? #106 Akki

Re: Openpli 6.2 rc? #107 littlesat

Re: Openpli 6.2 rc? #108 honda-civic

Re: Openpli 6.2 rc? #109 betacentauri

Re: Openpli 6.2 rc? #110 betacentauri

Re: Openpli 6.2 rc? #111 FendiMan

Attached Files

Re: Openpli 6.2 rc? #112 Frenske

Re: Openpli 6.2 rc? #113 FendiMan

Attached Files

Re: Openpli 6.2 rc? #114 Frenske

Re: Openpli 6.2 rc? #115 FendiMan

Re: Openpli 6.2 rc? #116 betacentauri

Re: Openpli 6.2 rc? #117 honda-civic

Re: Openpli 6.2 rc? #118 mikel

Re: Openpli 6.2 rc? #119 mikel

Re: Openpli 6.2 rc? #120 Frenske

16 user(s) are reading this topic