35 replies to this topic

[marto]

As title says, there are lot of missing plugins, not available for download as oscam, openmultiboot, kodi etc.

[Frenske]

As I just mentioned in the German section I didn’t notice this. It might be that some adjustment is needed in the access to the plugins. That shouldn’t be the fact but it might that the access is still restricted. We’ll have to wait until Wanwizard is available to check this.

[satdz]

Hello, we are waiting for the addition of other plugins, but an old remark is that several plugins in the OpenPli server, are not updated, such as tmdb etc ...

[Dream1975]

Seems indeed that access is not allowed yet:

 

Downloading http://garden.openpl...all/Packages.gz.
wget: server returned error: HTTP/1.1 403 Access Forbidden
Downloading http://garden.openpl...eon/Packages.gz.
wget: server returned error: HTTP/1.1 403 Access Forbidden
Downloading http://garden.openpl...o4k/Packages.gz.
wget: server returned error: HTTP/1.1 403 Access Forbidden
 

[Aliraza63]

It has also the "Error kernal mismatch " issue in  Openmultiboot 

[Neo64]

Open PLI 6.2 ???????

 

where????

[WanWizard]

Not 6.2-release, 6.2-rc.

 

And it has been retracted due to the feed error mentioned, A new build is running, for those who already flashed, you need to flash again to fix the issue.

 

NB: please note that 6.2-rc is a TEST image. There may well be more bugs that we haven't found yet, and there will be no upgrade path to 6.2-release other than to flash!

[satdz]

Hello WanWizard, you can show us the update log, thank you

[WanWizard]

Hasn't been made yet. When done it will appear here: https://wiki.openpli.org/Releasenotes

[kamacnik1]

One question for developer 

 

it's about Formuler F1 and kernel in use,is it kernel in this RC updated on 4.10.6 or still is used 4.7.6 ?

[Abu Baniaz]

The release candidate commit history is here

 

https://github.com/O...gma2/commits/rc

[anhellrena]

In my case upgraded my Lunix3 to the last 6.2 rc thing I do not normally do, but I did unconscious of it. But now it restarts constantly and reaches 99% and restarts again and again. 

I need help to solve this problem.

[WanWizard]

Does it show a green screen, or does it reboot with the boot logo still visible?

 

We only have one test box, but I haven't heard this before.

[fmc361]

One question for developer 

 

it's about Formuler F1 and kernel in use,is it kernel in this RC updated on 4.10.6 or still is used 4.7.6 ?

 

+1

[Frenske]

I'll do my best to perform a test on the Lunix but I haven't experienced any issues lately on this box. But it might be that my day continues different then expected. And in that case it will be tomorrow.

[darkman13]

one problem with mutant..for me .. flash in multiboot...check connection internet....OK...green screen.....

 

with skip connection...everything its ok ..after..

 

thanks

 

OpenPLi Enigma2 crash log

crashdate=Thu Jan  1 01:00:40 1970
compiledate=Apr  1 2018
skin=PLi-FullNightHD/skin.xml
sourcedate=2018-03-31
branch=rc
rev=5b52d1f
component=Enigma2

stbmodel=hd51
stbmodel=hd51
kernelcmdline=brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
nimsockets=NIM Socket 0:
imageissue=openpli 6.2-rc %h

Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 65, in action
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 377, in ok
  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 348, in finished
  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 545, in afterAsyncCode
  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 533, in updateValues
  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 596, in afterAsyncCode
  File "/usr/lib/enigma2/python/mytest.py", line 240, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 257, in doInstantiateDialog
    dlg = screen(self, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/Screens/InstallWizard.py", line 34, in __init__
TypeError: __init__() got an unexpected keyword argument 'graphic'

dmesg

<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 4.10.12 (build@bouwserver2) (gcc version 6.2.0 (GCC) ) #1 SMP Wed Mar 21 23:15:38 CET 2018
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[    0.000000] CPU: div instructions available: patching division code
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] OF: fdt:Machine model: BCM97251SSV
<6>[    0.000000] cma: Reserved 440 MiB at 0x0000000014800000
<6>[    0.000000] cma: Reserved 192 MiB at 0x0000000030000000
<3>[    0.000000] cma: Failed to reserve 440 MiB
<3>[    0.000000] cma: Failed to reserve 192 MiB
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 262144
<7>[    0.000000] free_area_init_node: node 0, pgdat c0913d80, node_mem_map d3e1c000
<7>[    0.000000]   Normal zone: 1728 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
<6>[    0.000000] percpu: Embedded 14 pages/cpu @d3ddd000 s26764 r8192 d22388 u57344
<7>[    0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260416
<5>[    0.000000] Kernel command line: brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 380616K/1048576K available (6629K kernel code, 361K rwdata, 1812K rodata, 340K init, 223K bss, 20792K reserved, 647168K cma-reserved, 65536K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
<5>[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc0681b08   (6631 kB)
<5>[    0.000000]       .init : 0xc0875000 - 0xc08ca000   ( 340 kB)
<5>[    0.000000]       .data : 0xc08ca000 - 0xc0924578   ( 362 kB)
<5>[    0.000000]        .bss : 0xc0926000 - 0xc095dcb4   ( 224 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000]  Build-time adjustment of leaf fanout to 32.
<6>[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
<6>[    0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
<6>[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[    0.000011] Switching to timer-based delay loop, resolution 37ns
<6>[    0.000287] Console: colour dummy device 80x30
<6>[    0.000308] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[    0.000318] pid_max: default: 32768 minimum: 301
<6>[    0.000424] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000431] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000885] CPU: Testing write buffer coherency: ok
<6>[    0.001135] CPU0: update cpu_capacity 1024
<6>[    0.001143] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001359] Setting up static identity map for 0x8440 - 0x8498
<6>[    0.003341] smp: Bringing up secondary CPUs ...
<6>[    0.004068] CPU1: update cpu_capacity 1024
<6>[    0.004072] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.004137] smp: Brought up 1 node, 2 CPUs
<6>[    0.004149] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[    0.004154] CPU: All CPU(s) started in SVC mode.
<6>[    0.004555] devtmpfs: initialized
<6>[    0.010733] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.010927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.010945] futex hash table entries: 512 (order: 3, 32768 bytes)
<6>[    0.025340] NET: Registered protocol family 16
<6>[    0.025761] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[    0.030371] cpuidle: using governor ladder
<6>[    0.034291] cpuidle: using governor menu
<6>[    0.043377] No ATAGs?
<6>[    0.043466] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.043475] hw-breakpoint: maximum watchpoint size is 8 bytes.
<5>[    0.058877] SCSI subsystem initialized
<7>[    0.059102] libata version 3.00 loaded.
<6>[    0.059305] usbcore: registered new interface driver usbfs
<6>[    0.059353] usbcore: registered new interface driver hub
<6>[    0.059396] usbcore: registered new device driver usb
<6>[    0.059461] Linux cec interface: v0.10
<6>[    0.059512] Linux video capture interface: v2.00
<6>[    0.059581] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.059586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.059667] PTP clock support registered
<6>[    0.060160] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.060815] clocksource: Switched to clocksource arch_sys_counter
<5>[    0.061008] FS-Cache: Loaded
<6>[    0.067045] NET: Registered protocol family 2
<6>[    0.067491] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.067532] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.067606] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.067694] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.067721] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.067861] NET: Registered protocol family 1
<6>[    0.068202] RPC: Registered named UNIX socket transport module.
<6>[    0.068207] RPC: Registered udp transport module.
<6>[    0.068211] RPC: Registered tcp transport module.
<6>[    0.068214] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.068223] PCI: CLS 0 bytes, default 64
<6>[    0.068585] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[    0.069976] workingset: timestamp_bits=14 max_order=18 bucket_order=4
<5>[    0.070635] NFS: Registering the id_resolver key type
<5>[    0.070658] Key type id_resolver registered
<5>[    0.070662] Key type id_legacy registered
<6>[    0.070673] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.070959] fuse init (API version 7.26)
<6>[    0.072870] bounce: pool size: 64 pages
<6>[    0.072912] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    0.072922] io scheduler noop registered
<6>[    0.072928] io scheduler deadline registered
<6>[    0.072957] io scheduler cfq registered (default)
<6>[    0.073237] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
<6>[    0.073539] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
<6>[    0.073986] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
<6>[    0.074575] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800000
<6>[    0.075079] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc000000
<6>[    0.109487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.111089] console [ttyS0] disabled
<6>[    0.111128] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
<6>[    0.797989] console [ttyS0] enabled
<6>[    0.802049] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
<6>[    0.811370] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
<6>[    0.827639] brd: module loaded
<6>[    0.834475] loop: module loaded
<3>[    0.838449] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
<4>[    0.847625] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
<6>[    0.853697] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[    0.870932] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
<6>[    0.879915] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[    0.889049] scsi host0: brcm-ahci
<6>[    0.892644] scsi host1: brcm-ahci
<6>[    0.896129] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
<6>[    0.904062] ata2: DUMMY
<6>[    0.906523] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[    0.913677] libphy: Fixed MDIO Bus: probed
<6>[    0.918096] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<6>[    0.935812] libphy: bcmgenet MII bus: probed
<6>[    0.962791] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
<6>[    0.968670] e1000e: Copyright© 1999 - 2015 Intel Corporation.
<6>[    0.993592] ehci-brcm: EHCI BRCM driver
<6>[    0.997556] ehci-brcm f0470300.ehci: EHCI Host Controller
<6>[    1.002990] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
<6>[    1.020694] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
<6>[    1.032815] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.039291] hub 1-0:1.0: USB hub found
<6>[    1.043083] hub 1-0:1.0: 1 port detected
<6>[    1.047287] ehci-brcm f0470500.ehci: EHCI Host Controller
<6>[    1.052718] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
<6>[    1.070408] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
<6>[    1.082816] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.089190] hub 2-0:1.0: USB hub found
<6>[    1.092974] hub 2-0:1.0: 1 port detected
<6>[    1.097101] ohci-brcm: OHCI BRCM driver
<6>[    1.101100] ohci-brcm f0470400.ohci: BRCM OHCI controller
<6>[    1.106525] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
<6>[    1.114176] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
<6>[    1.176201] hub 3-0:1.0: USB hub found
<6>[    1.179985] hub 3-0:1.0: 1 port detected
<6>[    1.184138] ohci-brcm f0470600.ohci: BRCM OHCI controller
<6>[    1.189564] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
<6>[    1.197212] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
<6>[    1.197823] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[    1.198388] ata1.00: ATA-7: WDC WD1600JS-56MHB1, 10.02E01, max UDMA/133
<6>[    1.198391] ata1.00: 312581808 sectors, multi 0: LBA48
<6>[    1.199006] ata1.00: configured for UDMA/133
<5>[    1.199365] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-56M 2E01 PQ: 0 ANSI: 5
<5>[    1.247483] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
<5>[    1.255059] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    1.260466] sd 0:0:0:0: [sda] Write Protect is off
<7>[    1.265285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    1.265434] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    1.284310]  sda: sda1
<5>[    1.287432] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    1.292326] hub 4-0:1.0: USB hub found
<6>[    1.296117] hub 4-0:1.0: 1 port detected
<6>[    1.300263] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.306838] ehci-pci: EHCI PCI platform driver
<6>[    1.311350] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.317558] ohci-pci: OHCI PCI platform driver
<6>[    1.322456] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[    1.327813] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
<6>[    1.335532] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
<6>[    1.344106] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
<6>[    1.350728] hub 5-0:1.0: USB hub found
<3>[    1.354522] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.361790] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[    1.367134] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
<6>[    1.374677] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    1.383158] hub 6-0:1.0: USB hub found
<6>[    1.386946] hub 6-0:1.0: 2 ports detected
<6>[    1.391269] usbcore: registered new interface driver uas
<6>[    1.396674] usbcore: registered new interface driver usb-storage
<6>[    1.402771] usb 1-1: new high-speed USB device number 2 using ehci-brcm
<6>[    1.409592] mousedev: PS/2 mouse device common for all mice
<6>[    1.415443] i2c /dev entries driver
<6>[    1.419227] IR NEC protocol handler initialized
<6>[    1.423778] IR RC5(x/sz) protocol handler initialized
<6>[    1.428842] IR RC6 protocol handler initialized
<6>[    1.433402] IR JVC protocol handler initialized
<6>[    1.437942] IR Sony protocol handler initialized
<6>[    1.442573] IR SANYO protocol handler initialized
<6>[    1.447289] IR Sharp protocol handler initialized
<6>[    1.452006] IR MCE Keyboard/mouse protocol handler initialized
<6>[    1.457850] IR XMP protocol handler initialized
<6>[    1.462390] smssdio: Siano SMS1xxx SDIO driver
<6>[    1.466841] smssdio: Copyright Pierre Ossman
<6>[    1.471515] sdhci: Secure Digital Host Controller Interface driver
<6>[    1.477709] sdhci: Copyright© Pierre Ossman
<6>[    1.482074] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    1.491240] hub 1-1:1.0: USB hub found
<6>[    1.495160] hub 1-1:1.0: 4 ports detected
<6>[    1.520820] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[    1.528401] hidraw: raw HID events driver © Jiri Kosina
<6>[    1.534018] usbcore: registered new interface driver usbhid
<6>[    1.539608] usbhid: USB HID core driver
<6>[    1.546080] NET: Registered protocol family 17
<5>[    1.550605] Key type dns_resolver registered
<6>[    1.555000] ThumbEE CPU extension supported.
<5>[    1.559290] Registering SWP/SWPB emulation handler
<6>[    1.571680] ALSA device list:
<6>[    1.574689]   No soundcards found.
<6>[    1.578690] Waiting for root device /dev/mmcblk0p5...
<6>[    1.655198] mmc0: new high speed MMC card at address 0001
<6>[    1.661024] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[    1.665700] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[    1.671787] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[    1.677855] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<4>[    1.685711] Alternate GPT is invalid, using primary GPT.
<6>[    1.691072]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
<3>[    1.703374] EXT4-fs (mmcblk0p5): couldn't mount as ext3 due to feature incompatibilities
<6>[    1.717783] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
<6>[    1.725947] VFS: Mounted root (ext4 filesystem) on device 179:5.
<6>[    1.734943] devtmpfs: mounted
<6>[    1.738316] Freeing unused kernel memory: 340K
<4>[    1.742775] This architecture does not have kernel memory protection.
<6>[    1.783829] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
<5>[    1.832895] random: fast init done
<6>[    1.887857] usb 1-1.3: new high-speed USB device number 4 using ehci-brcm
<6>[    1.912549] usb-storage 1-1.3:1.0: USB Mass Storage device detected
<6>[    1.936118] scsi host2: usb-storage 1-1.3:1.0
<4>[    2.204021] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
<6>[    2.213939] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
<4>[    2.265149] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[    2.410020] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<4>[    2.534069] hd51_1: loading out-of-tree module taints kernel.
<6>[    2.541154] usbcore: registered new interface driver tpm
<5>[    3.142627] scsi 2:0:0:0: Direct-Access     Lexar    USB Flash Drive  1100 PQ: 0 ANSI: 4
<5>[    3.151375] sd 2:0:0:0: Attached scsi generic sg1 type 0
<5>[    3.157361] sd 2:0:0:0: [sdb] 15634432 512-byte logical blocks: (8.00 GB/7.46 GiB)
<5>[    3.166362] sd 2:0:0:0: [sdb] Write Protect is off
<7>[    3.171228] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
<3>[    3.173360] sd 2:0:0:0: [sdb] No Caching mode page found
<3>[    3.178745] sd 2:0:0:0: [sdb] Assuming drive cache: write through
<6>[    3.195964]  sdb: sdb1
<5>[    3.204464] sd 2:0:0:0: [sdb] Attached SCSI removable disk
<6>[    3.300642] EXT4-fs (sdb1): mounted filesystem with writeback data mode. Opts: (null)
<4>[    4.557605] hd51: module_layout: kernel tainted.
<4>[    4.562276] Disabling lock debugging due to kernel taint
<6>[    7.086399] Console: switching to colour frame buffer device 160x45
<6>[    7.399681] input: dreambox remote control (native) as /devices/virtual/input/input0
<6>[    7.407925] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>[    7.554709] dvbdev: DVB: registering new adapter (dvb0)
<6>[    7.561246] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>[    7.568871] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
<6>[    7.814608] input: front panel as /devices/virtual/input/input2
<6>[    7.839382] Registered IR keymap rc-cec
<6>[    7.843629] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
<6>[    7.853044] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
<6>[    7.903477] EXT4-fs (mmcblk0p5): re-mounted. Opts: data=ordered
<6>[    8.285310] Console: switching to colour dummy device 80x30
<6>[    9.113814] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[    9.123170] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[   12.154296] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[   18.676267] NET: Registered protocol family 10
<6>[   18.681723] Segment Routing with IPv6
<5>[   18.887066] random: crng init done

[littlesat]

Already known....

[darkman13]

ok..thanks

[satdz]

Hello, hbbtv it's ok, but still the problem of Kodi and openmultiboot for fullHD boxes.

[WanWizard]

Already known....

 

and fixed in today's image.