Hi Guys ,
as of of my question : When the Openpli-6.2-rc-vuduo will be a Stable release ?? because it is still from about a month till now is ( Pre-Release Test Image ) ??
We are waiting for this Image Version to be a Stable Release 
When the openpli-6.2-rc-vuduo will be a Stable release ?
Started by domyati, 18 Apr 2018 07:41
11 replies to this topic
#1
-
- Member
- 20 posts
0
Neutral
Posted 18 April 2018 - 07:41
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #2
-
- Forum Moderator
PLi® Core member - 27,515 posts
+398
Excellent
Posted 18 April 2018 - 09:33
Due to all kind of plausible reasons the Release is posponed every time again. One of the reasons is that manufacturers suddenly update their BSP with important updates which sometimes causes issues that have to be fixed.
On the other hand, why don’t you try a Release Candidate? People used to be confronted with a kind of ‘unstable’ nightly build which sometimes caused breaking up the image. That was the main reason that we changed our building process, building a stable version. And now there is a RC for testing purposes and you ask for a stable release.
If you create a proper backup you can easily be ‘back in business’ within about 5 minutes with the online flash procedure.
And please don’t use such a horrible font.
On the other hand, why don’t you try a Release Candidate? People used to be confronted with a kind of ‘unstable’ nightly build which sometimes caused breaking up the image. That was the main reason that we changed our building process, building a stable version. And now there is a RC for testing purposes and you ask for a stable release.
If you create a proper backup you can easily be ‘back in business’ within about 5 minutes with the online flash procedure.
And please don’t use such a horrible font.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #3
-
- Member
- 20 posts
0
Neutral
Posted 21 April 2018 - 13:17
Due to all kind of plausible reasons the Release is posponed every time again. One of the reasons is that manufacturers suddenly update their BSP with important updates which sometimes causes issues that have to be fixed.
On the other hand, why don’t you try a Release Candidate? People used to be confronted with a kind of ‘unstable’ nightly build which sometimes caused breaking up the image. That was the main reason that we changed our building process, building a stable version. And now there is a RC for testing purposes and you ask for a stable release.
If you create a proper backup you can easily be ‘back in business’ within about 5 minutes with the online flash procedure.
And please don’t use such a horrible font.
Thanks Man for your Reply ......... I already tested The RC Image for 2 times but it is not Stable and Causes a lot of crashes and Freezes and missing many plugins every time .
So , I'm still waiting for the Stable Image for Openpli-6.2 my best wishes to you to do the great job ASAP .
do your Best
Edited by WanWizard, 21 April 2018 - 13:28.
removed horrible font, bold and colour
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #4
-
- PLi® Core member
- 71,173 posts
+1,842
Excellent
Posted 21 April 2018 - 13:27
Not sure what you tested, there is nothing missing in rc-6.2, nothing crashing, nothing freezing. I run rc-6.2 on all my boxes.
And if that is the case, I haven't seen a bugreport about it, if you don't report it, it doesn't get fixed. And a stable will never be ready.
And please read Frenske's last line. No need for fonts and colours, very annoying...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #5
-
- Member
- 20 posts
0
Neutral
Posted 21 April 2018 - 13:56
Not sure what you tested, there is nothing missing in rc-6.2, nothing crashing, nothing freezing. I run rc-6.2 on all my boxes.
And if that is the case, I haven't seen a bugreport about it, if you don't report it, it doesn't get fixed. And a stable will never be ready.
And please read Frenske's last line. No need for fonts and colours, very annoying...
So , are you sure : can I run rc-6.2 for my VU+ Duo 1 box with no problem or Crashes ?? will all plugins will be installed well and work well ??
If Ok . I will Test today 
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #6
-
- PLi® Core member
- 71,173 posts
+1,842
Excellent
Posted 21 April 2018 - 14:34
I haven't tested on a VU+ Duo myself. But I have on an edision, a few zgemma's, a galaxy4k, a VU Zero 4K, and HD2400 and an ET10000. And I haven't tested all plugins (impossible to do), but that is why there is an RC, so people can test it and report issues back, either to us, or to the author of the plugin (a lot are not made or maintained by us).
I am not claiming it is bug free (nothing ever is), but I use it every day as my main viewing and recording box (we eat our own dogfood ).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #7
-
- Member
- 20 posts
0
Neutral
Posted 21 April 2018 - 14:39
I haven't tested on a VU+ Duo myself. But I have on an edision, a few zgemma's, a galaxy4k, a VU Zero 4K, and HD2400 and an ET10000. And I haven't tested all plugins (impossible to do), but that is why there is an RC, so people can test it and report issues back, either to us, or to the author of the plugin (a lot are not made or maintained by us).
I am not claiming it is bug free (nothing ever is), but I use it every day as my main viewing and recording box (we eat our own dogfood
HaaaHaaaaa 
Thanks WanWizard for your reply , I will test today and back to you as well
thanks
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #8
-
- Senior Member
- 112 posts
+1
Neutral
Posted 21 April 2018 - 17:37
Hi WanWizard!!!!!
When the vu+ will release next drivers for fixing bugs in Vu zero4k like signal 99% 100% always?
I know that nobody knows but from your experiance?
the last drivers was
http://code.vuplus.c...repo&repos=oe30
Thank you!
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #9
-
- PLi® Core member
- 71,173 posts
+1,842
Excellent
Posted 21 April 2018 - 17:53
We have exactly the same: https://github.com/v.../commits/master
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #10
-
- Senior Member
- 112 posts
+1
Neutral
Posted 21 April 2018 - 18:03
thanks!
i see that we have the same!!
But when the next drivers from your experiance?
Thnakyou!
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #11
-
- PLi® Core member
- 71,173 posts
+1,842
Excellent
Posted 21 April 2018 - 18:41
Whenever there are new ones. We don't know. We have no information on what they work or don't work on.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: When the openpli-6.2-rc-vuduo will be a Stable release ? #12
-
- Senior Member
- 112 posts
+1
Neutral
Posted 21 April 2018 - 19:11
thank you! WanWizard!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
