19 replies to this topic

[kaytros]

Dear All ,

I instaled Openpli 6.2 last image   (openpli-6.2-release-formuler4turbo-20180521_usb.zip)  to Formuler F4 Turbo. (Also i tried all of 6.2 image .)

 

I saw a problem with USB HDD is not working.   ( when I install Openpli 6.1 image it is working)

 

In addition please add  a properties to  subtitle convert support   ( for  external  subtitle for ascii  )

The problem about turkish capital .

 

 

Please Help me.

 

Best regards.

 

 

 

[WanWizard]

Define "USB HDD not working"? We need much more info. What did you expect to happen? What does happen instead?

[kaytros]

Dear WanWizard

 

When i pluged a USB device (about 8gb  standard usb disc  it can be show on HDD menu and record path and  mediaplayer menu.  )

But when i pluged a USB HDD (240 gb usb Hdd) newer show anywhere.

 

 

Define "USB HDD not working"? We need much more info. What did you expect to happen? What does happen instead?

[Pr2]

Hi,

 

What is the partition type of your USB HDD 240Gb (FAT/NTFS/HFS/EXT4)?

 

Connect thanks to a telnet client to you box.

When done,  connect the HDD.

Then type:

dmesg
lsusb

And show us the result of those two commands. No need to take a screenshot, telnet are pure text so you should be able to perform a copy/paste selecting the text (except if you are using DCC that prevent you from doing copy/paste).

 

Pr2

[kaytros]

Hello 

 

USB HDD 240Gb (NTFS)

 

root@formuler4turbo:~# lsusb

 

Bus 001 Device 005: ID 0bc2:2312 

Bus 002 Device 001: ID 1d6b:0001

Bus 001 Device 001: ID 1d6b:0002

 

 

 

 

ot@formuler4turbo:~# dmesg

[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]

[    0.000000] On node 0 totalpages: 131072

[    0.000000]   Normal zone: 1152 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 131072 pages, LIFO batch:31

[    0.000000] percpu: Embedded 13 pages/cpu @81484000 s22608 r8192 d22448 u53248

[    0.000000] pcpu-alloc: s22608 r8192 d22448 u53248 alloc=13*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920

[    0.000000] Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M console=ttyS0,115200n8

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] Memory: 312344K/524288K available (7864K kernel code, 379K rwdata, 1496K rodata, 296K init, 156K bss, 211944K reserved, 0K cma-reserved)

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  Build-time adjustment of leaf fanout to 32.

[    0.000000] NR_IRQS:160

[    0.000000] Measuring MIPS counter frequency...

[    0.000000] Detected MIPS clock frequency: 751 MHz (375.764 MHz counter)

[    0.000000] clocksource: wktmr: mask: 0xffffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns

[    0.000000] sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 2147483647500000ns

[    0.000000] Console: colour dummy device 80x25

[    0.008000] Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)

[    0.009000] pid_max: default: 32768 minimum: 301

[    0.009000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

[    0.009000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

[    0.010000] smp: Bringing up secondary CPUs ...

[    0.011000] SMP: Booting CPU1...

[    0.015000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.

[    0.015000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes

[    0.015000] CPU1 revision is: 0002a065 (Broadcom BMIPS4380)

[    0.015000] FPU revision is: 00130001

[    0.024000] SMP: CPU1 is running

[    0.024000] smp: Brought up 1 node, 2 CPUs

[    0.024000] devtmpfs: initialized

[    0.027000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[    0.027000] futex hash table entries: 512 (order: 3, 32768 bytes)

[    0.028000] NET: Registered protocol family 16

[    0.043000] USB0: power enable is active high; overcurrent is active low

[    0.053000] SCSI subsystem initialized

[    0.053000] libata version 3.00 loaded.

[    0.053000] usbcore: registered new interface driver usbfs

[    0.053000] usbcore: registered new interface driver hub

[    0.053000] usbcore: registered new device driver usb

[    0.053000] Linux cec interface: v0.10

[    0.053000] Linux video capture interface: v2.00

[    0.054000] Advanced Linux Sound Architecture Driver Initialized.

[    0.054000] Bluetooth: Core ver 2.22

[    0.054000] NET: Registered protocol family 31

[    0.054000] Bluetooth: HCI device and connection manager initialized

[    0.054000] Bluetooth: HCI socket layer initialized

[    0.054000] Bluetooth: L2CAP socket layer initialized

[    0.054000] Bluetooth: SCO socket layer initialized

[    0.055000] clocksource: Switched to clocksource wktmr

[    0.055000] FS-Cache: Loaded

[    0.062000] random: fast init done

[    0.064000] NET: Registered protocol family 2

[    0.065000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)

[    0.065000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

[    0.065000] TCP: Hash tables configured (established 4096 bind 4096)

[    0.065000] UDP hash table entries: 256 (order: 1, 8192 bytes)

[    0.065000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[    0.066000] NET: Registered protocol family 1

[    0.066000] RPC: Registered named UNIX socket transport module.

[    0.066000] RPC: Registered udp transport module.

[    0.066000] RPC: Registered tcp transport module.

[    0.066000] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.068000] workingset: timestamp_bits=14 max_order=17 bucket_order=3

[    0.069000] NFS: Registering the id_resolver key type

[    0.069000] Key type id_resolver registered

[    0.069000] Key type id_legacy registered

[    0.069000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[    0.069000] Installing knfsd (copyright © 1996 okir@monad.swb.de).

[    0.069000] fuse init (API version 7.26)

[    0.077000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[    0.077000] io scheduler noop registered

[    0.077000] io scheduler cfq registered (default)

[    0.077000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[    0.078000] console [ttyS0] disabled

[    0.079000] serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A

[    0.594000] console [ttyS0] enabled

[    0.598000] serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A

[    0.607000] serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A

[    0.624000] loop: module loaded

[    0.628000] ahci ahci.0: SSS flag set, parallel bus scan disabled

[    0.644000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

[    0.652000] ahci ahci.0: flags: ncq sntf stag clo slum part

[    0.662000] scsi host0: ahci

[    0.666000] scsi host1: ahci

[    0.669000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87

[    0.677000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87

[    0.685000] brcmstb_nand: NAND controller driver is loaded

[    0.691000] libphy: Fixed MDIO Bus: probed

[    0.696000] __clk_enable: network [1]

[    0.696000] __clk_enable: enet [1]

[    0.696000] bcm7552_pm_genet_enable 00

[    0.696000] bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0

[    0.701000] bcmgenet bcmgenet.0: failed to get enet-eee clock

[    0.741000] libphy: bcmgenet MII bus: probed

[    0.745000] __clk_disable: enet [0]

[    0.745000] bcm7552_pm_genet_disable 00

[    0.745000] __clk_disable: network [0]

[    0.746000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    0.753000] __clk_enable: usb [1]

[    0.753000] bcm7552_pm_usb_enable 00

[    0.753000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI

[    0.758000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1

[    0.776000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300

[    0.788000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00

[    0.794000] hub 1-0:1.0: USB hub found

[    0.798000] hub 1-0:1.0: 2 ports detected

[    0.803000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    0.809000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI

[    0.814000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2

[    0.821000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400

[    0.893000] hub 2-0:1.0: USB hub found

[    0.897000] hub 2-0:1.0: 2 ports detected

[    0.902000] usbcore: registered new interface driver usb-storage

[    0.908000] mousedev: PS/2 mouse device common for all mice

[    0.914000] i2c /dev entries driver

[    0.918000] usbcore: registered new interface driver btusb

[    0.923000] sdhci: Secure Digital Host Controller Interface driver

[    0.929000] sdhci: Copyright© Pierre Ossman

[    0.934000] sdhci-pltfm: SDHCI platform and OF driver helper

[    0.940000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller

[    0.946000] mmc0: Failed to set 64-bit DMA mask.

[    0.951000] mmc0: Failed to set 32-bit DMA mask.

[    0.956000] mmc0: No suitable DMA available - falling back to PIO

[    0.989000] ata1: SATA link down (SStatus 0 SControl 300)

[    0.995000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO

[    1.002000] hidraw: raw HID events driver © Jiri Kosina

[    1.008000] usbcore: registered new interface driver usbhid

[    1.014000] usbhid: USB HID core driver

[    1.018000] NET: Registered protocol family 17

[    1.022000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    1.029000] Bluetooth: HIDP socket layer initialized

[    1.033000] Key type dns_resolver registered

[    1.038000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor

[    1.046000] EBI CS0: setting up NAND flash (primary)

[    1.052000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda

[    1.058000] nand: AMD/Spansion S34ML02G1

[    1.062000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

[    1.070000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda

[    1.077000] nand: AMD/Spansion S34ML02G1

[    1.080000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

[    1.088000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC

[    1.098000] Bad block table found at page 131008, version 0x01

[    1.104000] Bad block table found at page 130944, version 0x01

[    1.111000] Creating 3 MTD partitions on "brcmnand.0":

[    1.116000] 0x000000500000-0x000010000000 : "complete"

[    1.124000] 0x000000500000-0x000000b00000 : "kernel"

[    1.130000] 0x000000b00000-0x000010000000 : "rootfs"

[    1.133000] mmc0: new high speed SDHC card at address 0001

[    1.134000] mmcblk0: mmc0:0001 USB D 31.3 GiB

[    1.140000]  mmcblk0: p1

[    1.151000] ubi0: default fastmap pool size: 95

[    1.155000] ubi0: default fastmap WL pool size: 47

[    1.160000] ubi0: attaching mtd2

[    1.325000] ata2: SATA link down (SStatus 0 SControl 300)

[    1.364000] ubi0: attached by fastmap

[    1.368000] ubi0: fastmap pool size: 95

[    1.371000] ubi0: fastmap WL pool size: 47

[    1.388000] ubi0: attached mtd2 (name "rootfs", size 245 MiB)

[    1.394000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

[    1.401000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

[    1.407000] usb 1-2: new high-speed USB device number 2 using ehci-brcm

[    1.414000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

[    1.421000] ubi0: good PEBs: 1956, bad PEBs: 4, corrupted PEBs: 0

[    1.427000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

[    1.434000] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 568337098

[    1.443000] ubi0: available PEBs: 0, total reserved PEBs: 1956, PEBs reserved for bad PEB handling: 36

[    1.453000] ubi0: background thread "ubi_bgt0d" started, PID 88

[    1.453000] ALSA device list:

[    1.453000]   No soundcards found.

[    1.468000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 89

[    1.613000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"

[    1.620000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

[    1.630000] UBIFS (ubi0:0): FS size: 241635328 bytes (230 MiB, 1903 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)

[    1.641000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)

[    1.647000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 72C35085-1532-4CC5-8A69-0B3102B935F9, small LPT model

[    1.660000] VFS: Mounted root (ubifs filesystem) on device 0:12.

[    1.668000] devtmpfs: mounted

[    1.671000] Freeing unused kernel memory: 296K

[    1.676000] This architecture does not have kernel memory protection.

[    1.828000] random: crng init done

[    2.408000] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[    4.005000] formuler4turbo_dvb: loading out-of-tree module taints kernel.

[    4.104000] *** Nexus was compiled with no error messages. For any failure, recompile with B_REFSW_DEBUG=y and retest.

[    4.572000] ...........

[    5.556000] fb0: bcmfb frame buffer device

[    5.561000] input: dreambox front panel as /devices/virtual/input/input0

[    5.580000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1

[    5.593000] dvbdev: DVB: registering new adapter ("formuler4turbo_dvb")

[    5.698000] "formuler4turbo_dvb" "formuler4turbo_dvb".0: DVB: registering adapter 0 frontend 0 (DVB-S2 G3)...

[    8.578000] __clk_enable: network [1]

[    8.578000] __clk_enable: enet [1]

[    8.578000] bcm7552_pm_genet_enable 00

[    8.866000] bcmgenet bcmgenet.0: configuring instance for (null)

[   10.001000] bcmgenet bcmgenet.0 eth0: Link is Down

[   10.611000] bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control off

[   13.037000] NET: Registered protocol family 10

[   13.044000] Segment Routing with IPv6

[  444.638000] usb usb1-port2: disabled by hub (EMI?), re-enabling...

[  444.644000] usb 1-2: USB disconnect, device number 2

[  485.738000] usb 1-2: new high-speed USB device number 3 using ehci-brcm

[  684.436000] usb 1-2: USB disconnect, device number 3

[  688.971000] usb 1-2: new high-speed USB device number 4 using ehci-brcm

[  689.098000] usb-storage 1-2:1.0: USB Mass Storage device detected

[  689.117000] scsi host2: usb-storage 1-2:1.0

[  690.145000] scsi 2:0:0:0: Direct-Access     Verbatim STORE N GO       1.00 PQ: 0 ANSI: 2

[  690.159000] sd 2:0:0:0: Attached scsi generic sg0 type 0

[  690.180000] sd 2:0:0:0: [sda] 31299584 512-byte logical blocks: (16.0 GB/14.9 GiB)

[  690.200000] sd 2:0:0:0: [sda] Write Protect is off

[  690.205000] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00

[  690.217000] sd 2:0:0:0: [sda] No Caching mode page found

[  690.222000] sd 2:0:0:0: [sda] Assuming drive cache: write through

[  690.254000]  sda: sda4

[  690.287000] sd 2:0:0:0: [sda] Attached SCSI removable disk

[  751.001000] usb 1-2: USB disconnect, device number 4

[  753.720000] usb 1-2: new high-speed USB device number 5 using ehci-brcm

root@formuler4turbo:~#

[WanWizard]

[  690.254000]  sda: sda4

what happened with partitions 1, 2 and 3?

[kaytros]

Dear

instaled a sd-card (32 GB) and not another one.

 

i will check today again.

 

by the way do you have a idea about subtitle problem i wrote?

 

Best regards.

[mrvica]

But when i pluged a USB HDD (240 gb usb Hdd) newer show anywhere.

 

guess, USB hardrive is without an external power supply, it won´t work, you need an USB hub with the external power supply

[kaytros]

Dear  Mrvica  Thanks your answer.

 

But When i using openpli 6.1 it was working without external power.  i will tray with external power.

[kaytros]

I tried someting. 

 

1. I used external power for the usb hdd. it does not work.   ( My usb device is  Seagate Expansion HDD Disk  and sandisk SSD 240 GB)

    i tried with Wd myPassport 500gb SSD  its working .

 

i rolback box to 6.1 image  .  all of them are working perfectly. 

 

I think the problem about some  missing usb drive.

 

Because of when i update 6.1 to 6.2 from box  menu   it was working for first restart.

 After Device dedected new update  and i instaled some new update from enigma menu.   But it does not work. stayed on boot.

so

 

i had to flash  by usb device  (6.2) ..Now  the problem continues.

 

Best regards.

Edited by kaytros, 23 May 2018 - 16:28.

[Pr2]

Did you take a copy of the dmesg when you rollback to OpenPLi 6.1 so we can compare the output of both version?

 

You can also take the output of:

opkg list-installed 

on 6.1 and 6.2

 

And compare both with a texteditor to find which plugin you install on 6.1 

[jeroenov]

I have the same problem here: since 6.2 my external hard drive is not recognised. It's a 4 TB Seagate Expansion Desktop Drive. Going back to 6.1 makes it all work again.

[jeroenov]

The difference in dmesg: 

6.1

Warning: unable to open an initial console.

usb 8-1: new full-speed USB device number 2 using ohci-brcm

usb 2-1: new high-speed USB device number 2 using ehci-brcm

usb-storage 2-1:1.0: USB Mass Storage device detected

scsi host3: usb-storage 2-1:1.0

random: nonblocking pool is initialized

scsi 3:0:0:0: Direct-Access     Seagate  Expansion Desk   9401 PQ: 0 ANSI: 6

sd 3:0:0:0: Attached scsi generic sg0 type 0

sd 3:0:0:0: [sda] Spinning up disk...

.......ready

sd 3:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).

sd 3:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.63 TiB)

sd 3:0:0:0: [sda] Write Protect is off

sd 3:0:0:0: [sda] Mode Sense: 4f 00 00 00

sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sd 3:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).

 sda: sda1

sd 3:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).

sd 3:0:0:0: [sda] Attached SCSI disk

ata1: softreset failed (device not ready)

ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133

ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)

ata1.00: configured for UDMA/133

scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  0001 PQ: 0 ANSI: 5

sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

sd 0:0:0:0: Attached scsi generic sg1 type 0

sd 0:0:0:0: [sdb] Write Protect is off

sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

 sdb: sdb1

sd 0:0:0:0: [sdb] Attached SCSI disk

ata2: SATA link down (SStatus 0 SControl 300)

UBIFS: background thread "ubifs_bgt0_0" started, PID 71

UBIFS: mounted UBI device 0, volume 0, name "rootfs"

UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS: FS size: 501682176 bytes (478 MiB, 3951 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)

UBIFS: reserved for root: 0 bytes (0 KiB)

UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3D59C8D0-47A4-4B54-B7C3-71B207646B40, small LPT model

VFS: Mounted root (ubifs filesystem) on device 0:13.

devtmpfs: mounted

Freeing unused kernel memory: 264K (808ee000 - 80930000)

EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

usbcore: registered new interface driver tpm

dvb: module_layout: kernel tainted.

Disabling lock debugging due to kernel taint

Console: switching to colour frame buffer device 160x45

input: dreambox remote control (native) as /devices/virtual/input/input0

input: dreambox advanced remote control (native) as /devices/virtual/input/input1

DVB: registering new adapter (dvb0)

platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...

platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...

platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-C)...

 

6.2

[    1.109000] Warning: unable to open an initial console.

[    1.110000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 88

[    1.164000] usb 8-1: new full-speed USB device number 2 using ohci-brcm

[    1.217000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"

[    1.217000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

[    1.217000] UBIFS (ubi0:0): FS size: 501682176 bytes (478 MiB, 3951 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)

[    1.217000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)

[    1.217000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 96158F43-7EC8-41BC-8F25-4E67A974373C, small LPT model

[    1.220000] VFS: Mounted root (ubifs filesystem) on device 0:12.

[    1.222000] devtmpfs: mounted

[    1.222000] Freeing unused kernel memory: 284K

[    1.222000] This architecture does not have kernel memory protection.

[    1.297000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)

[    1.302000] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133

[    1.302000] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)

[    1.308000] ata1.00: configured for UDMA/133

[    1.308000] ata1: EH complete

[    1.308000] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  0001 PQ: 0 ANSI: 5

[    1.317000] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    1.318000] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[    1.318000] sd 0:0:0:0: [sda] Write Protect is off

[    1.318000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.318000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.324000]  sda: sda1

[    1.325000] sd 0:0:0:0: [sda] Attached SCSI disk

[    1.550000] random: crng init done

[    1.684000] usb 2-1: new high-speed USB device number 2 using ehci-brcm

[    1.835000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[    1.977000] tpm: loading out-of-tree module taints kernel.

[    1.981000] usbcore: registered new interface driver tpm

[    5.031000] dvb: module_layout: kernel tainted.

[    5.031000] Disabling lock debugging due to kernel taint

[    8.271000] input: dreambox remote control (native) as /devices/virtual/input/input0

[    8.272000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1

[    8.346000] dvbdev: DVB: registering new adapter (dvb0)

[    8.347000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...

[    8.348000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...

[    8.349000] platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-C)...

[WanWizard]

I have seen similar issues with USB sticks, but I can't reproduce it. And it is only upon boot, if you unplug it, and plug it back in, it is detected fine.

[Dimitrij]

Install develop image for lunix3-4k all my flash drives,k are not automatically mounted in the lunix3-4k/solo4k.

6.1 not problem

6.2/develop error mounting

Edited by Dimitrij, 18 September 2018 - 11:59.

[Pr2]

This was already reported:

 

https://devtools.ope....org/issues/112

[WanWizard]

But I can't reproduce it, and that makes it difficult to work on. Every one of my boxes has a USB stick for backup and flashing, and I've only seen this a few times...

[Pr2]

I had troubles with USB3 memory stick.

[Dimitrij]

USB2 /USB3 / USB HDD same problem

[WanWizard]

I don't have USB3 devices. If someone has this problem with one of the boxes in my signature, let me know so I have something to reproduce it with.

 

I have a USB2 stick in every box, and my current "watch" box has a USB2 1TB disk attached. And so far I don't have a problem, apart from an incidental issue that I couldn't repeat (i.e. after a reboot the stick was detected and mounted fine).