Jump to content


Photo

New driver or new 6.2


  • Please log in to reply
13 replies to this topic

#1 darkman13

  • Senior Member
  • 61 posts

0
Neutral

Posted 22 May 2018 - 17:36

After new driver and 6.2 stable....i have problems with mut@tant HD51...with zapp in terrestrial channels..

 

crash....spinner 5sec....or delay time in zapp...

 

for crash...green screen

 

 

OpenPLi Enigma2 crash log
crashdate=Tue May 22 15:17:29 2018
compiledate=May 22 2018
skin=AeonFHD_MOD/skin.xml
sourcedate=2018-05-21
branch=release-6.2
rev=4c8e177
component=enigma2, signal
stbmodel=hd51
stbmodel=hd51
kernelcmdline=root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
nimsockets=NIM Socket 0:
imageissue=openpli 6.2-release %h

[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x758A8]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB616BC50]
-------FATAL SIGNAL

dmesg
<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 4.10.12 (build@bouwserver2) (gcc version 6.2.0 (GCC) ) #1 SMP Wed May 16 16:36:11 CEST 2018
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[    0.000000] CPU: div instructions available: patching division code
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] OF: fdt:Machine model: BCM97251SSV
<6>[    0.000000] cma: Reserved 440 MiB at 0x0000000014800000
<6>[    0.000000] cma: Reserved 192 MiB at 0x0000000030000000
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 262144
<7>[    0.000000] free_area_init_node: node 0, pgdat c0915d80, node_mem_map d3e1c000
<7>[    0.000000]   Normal zone: 1728 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
<6>[    0.000000] percpu: Embedded 14 pages/cpu @d3ddd000 s26764 r8192 d22388 u57344
<7>[    0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260416
<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 380608K/1048576K available (6629K kernel code, 361K rwdata, 1816K rodata, 344K init, 223K bss, 20800K reserved, 647168K cma-reserved, 65536K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
<5>[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc0681b08   (6631 kB)
<5>[    0.000000]       .init : 0xc0876000 - 0xc08cc000   ( 344 kB)
<5>[    0.000000]       .data : 0xc08cc000 - 0xc0926578   ( 362 kB)
<5>[    0.000000]        .bss : 0xc0928000 - 0xc095fcb4   ( 224 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000]  Build-time adjustment of leaf fanout to 32.
<6>[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
<6>[    0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
<6>[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[    0.000011] Switching to timer-based delay loop, resolution 37ns
<6>[    0.000291] Console: colour dummy device 80x30
<6>[    0.000313] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[    0.000322] pid_max: default: 32768 minimum: 301
<6>[    0.000427] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000433] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000888] CPU: Testing write buffer coherency: ok
<6>[    0.001141] CPU0: update cpu_capacity 1024
<6>[    0.001147] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001364] Setting up static identity map for 0x8440 - 0x8498
<6>[    0.003379] smp: Bringing up secondary CPUs ...
<6>[    0.004101] CPU1: update cpu_capacity 1024
<6>[    0.004104] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.004170] smp: Brought up 1 node, 2 CPUs
<6>[    0.004181] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[    0.004187] CPU: All CPU(s) started in SVC mode.
<6>[    0.004584] devtmpfs: initialized
<6>[    0.010802] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.010993] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.011009] futex hash table entries: 512 (order: 3, 32768 bytes)
<6>[    0.025353] NET: Registered protocol family 16
<6>[    0.025773] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[    0.030424] cpuidle: using governor ladder
<6>[    0.034359] cpuidle: using governor menu
<6>[    0.043453] No ATAGs?
<6>[    0.043547] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.043557] hw-breakpoint: maximum watchpoint size is 8 bytes.
<5>[    0.058944] SCSI subsystem initialized
<7>[    0.059274] libata version 3.00 loaded.
<6>[    0.059484] usbcore: registered new interface driver usbfs
<6>[    0.059532] usbcore: registered new interface driver hub
<6>[    0.059575] usbcore: registered new device driver usb
<6>[    0.059640] Linux cec interface: v0.10
<6>[    0.059753] Linux video capture interface: v2.00
<6>[    0.059827] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.059832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.059853] PTP clock support registered
<6>[    0.060351] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.060994] clocksource: Switched to clocksource arch_sys_counter
<5>[    0.061170] FS-Cache: Loaded
<6>[    0.067278] NET: Registered protocol family 2
<6>[    0.067646] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.067686] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.067759] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.067848] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.067874] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.068012] NET: Registered protocol family 1
<6>[    0.068349] RPC: Registered named UNIX socket transport module.
<6>[    0.068354] RPC: Registered udp transport module.
<6>[    0.068357] RPC: Registered tcp transport module.
<6>[    0.068360] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.068368] PCI: CLS 0 bytes, default 64
<6>[    0.068712] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[    0.070151] workingset: timestamp_bits=14 max_order=18 bucket_order=4
<5>[    0.070724] NFS: Registering the id_resolver key type
<5>[    0.070746] Key type id_resolver registered
<5>[    0.070749] Key type id_legacy registered
<6>[    0.070760] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.071045] fuse init (API version 7.26)
<6>[    0.073047] bounce: pool size: 64 pages
<6>[    0.073102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    0.073111] io scheduler noop registered
<6>[    0.073116] io scheduler deadline registered
<6>[    0.073147] io scheduler cfq registered (default)
<6>[    0.073446] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
<6>[    0.073756] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
<6>[    0.074221] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
<6>[    0.074818] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800000
<6>[    0.075324] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc000000
<6>[    0.109487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.111136] console [ttyS0] disabled
<6>[    0.111177] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
<6>[    0.786605] console [ttyS0] enabled
<6>[    0.790654] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
<6>[    0.800005] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
<6>[    0.816307] brd: module loaded
<6>[    0.823221] loop: module loaded
<3>[    0.827239] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
<4>[    0.836411] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
<6>[    0.842482] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[    0.859717] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
<6>[    0.868697] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[    0.877823] scsi host0: brcm-ahci
<6>[    0.881419] scsi host1: brcm-ahci
<6>[    0.884905] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
<6>[    0.892844] ata2: DUMMY
<6>[    0.895304] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[    0.902469] libphy: Fixed MDIO Bus: probed
<6>[    0.906891] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<6>[    0.924993] libphy: bcmgenet MII bus: probed
<6>[    0.951971] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
<6>[    0.957851] e1000e: Copyright© 1999 - 2015 Intel Corporation.
<6>[    0.982797] ehci-brcm: EHCI BRCM driver
<6>[    0.986766] ehci-brcm f0470300.ehci: EHCI Host Controller
<6>[    0.992196] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
<6>[    1.009896] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
<6>[    1.020391] ata1: SATA link down (SStatus 0 SControl 300)
<6>[    1.021998] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.022542] hub 1-0:1.0: USB hub found
<6>[    1.022563] hub 1-0:1.0: 1 port detected
<6>[    1.022856] ehci-brcm f0470500.ehci: EHCI Host Controller
<6>[    1.022870] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
<6>[    1.032982] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
<6>[    1.039990] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.040487] hub 2-0:1.0: USB hub found
<6>[    1.040530] hub 2-0:1.0: 1 port detected
<6>[    1.040755] ohci-brcm: OHCI BRCM driver
<6>[    1.040917] ohci-brcm f0470400.ohci: BRCM OHCI controller
<6>[    1.040931] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
<6>[    1.041020] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
<6>[    1.099416] hub 3-0:1.0: USB hub found
<6>[    1.103208] hub 3-0:1.0: 1 port detected
<6>[    1.107386] ohci-brcm f0470600.ohci: BRCM OHCI controller
<6>[    1.112817] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
<6>[    1.120486] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
<6>[    1.182384] hub 4-0:1.0: USB hub found
<6>[    1.186168] hub 4-0:1.0: 1 port detected
<6>[    1.190292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.196852] ehci-pci: EHCI PCI platform driver
<6>[    1.201365] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.207569] ohci-pci: OHCI PCI platform driver
<6>[    1.212364] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[    1.217715] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
<6>[    1.225413] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
<6>[    1.233991] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
<6>[    1.240434] hub 5-0:1.0: USB hub found
<3>[    1.244224] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.251491] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[    1.256825] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
<6>[    1.264370] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    1.272838] hub 6-0:1.0: USB hub found
<6>[    1.276625] hub 6-0:1.0: 2 ports detected
<6>[    1.280949] usbcore: registered new interface driver uas
<6>[    1.286357] usbcore: registered new interface driver usb-storage
<6>[    1.292873] mousedev: PS/2 mouse device common for all mice
<6>[    1.298737] i2c /dev entries driver
<6>[    1.302509] IR NEC protocol handler initialized
<6>[    1.307062] IR RC5(x/sz) protocol handler initialized
<6>[    1.312128] IR RC6 protocol handler initialized
<6>[    1.316670] IR JVC protocol handler initialized
<6>[    1.321213] IR Sony protocol handler initialized
<6>[    1.325842] IR SANYO protocol handler initialized
<6>[    1.330559] IR Sharp protocol handler initialized
<6>[    1.335275] IR MCE Keyboard/mouse protocol handler initialized
<6>[    1.341121] IR XMP protocol handler initialized
<6>[    1.345668] smssdio: Siano SMS1xxx SDIO driver
<6>[    1.350124] smssdio: Copyright Pierre Ossman
<6>[    1.354797] sdhci: Secure Digital Host Controller Interface driver
<6>[    1.360999] sdhci: Copyright© Pierre Ossman
<6>[    1.365370] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    1.373363] usb 1-1: new high-speed USB device number 2 using ehci-brcm
<6>[    1.395196] hub 1-1:1.0: USB hub found
<6>[    1.399110] hub 1-1:1.0: 4 ports detected
<6>[    1.411000] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[    1.418583] hidraw: raw HID events driver © Jiri Kosina
<6>[    1.424157] usbcore: registered new interface driver usbhid
<6>[    1.429750] usbhid: USB HID core driver
<6>[    1.436403] NET: Registered protocol family 17
<5>[    1.440957] Key type dns_resolver registered
<6>[    1.445335] ThumbEE CPU extension supported.
<5>[    1.449623] Registering SWP/SWPB emulation handler
<6>[    1.462095] ALSA device list:
<6>[    1.465091]   No soundcards found.
<6>[    1.469114] Waiting for root device /dev/mmcblk0p3...
<6>[    1.544363] mmc0: new high speed MMC card at address 0001
<6>[    1.550187] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[    1.554865] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[    1.560921] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[    1.567018] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<4>[    1.574879] Alternate GPT is invalid, using primary GPT.
<6>[    1.580235]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<3>[    1.592472] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
<4>[    1.604001] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
<6>[    1.614860] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
<6>[    1.623019] VFS: Mounted root (ext4 filesystem) on device 179:3.
<6>[    1.630887] devtmpfs: mounted
<6>[    1.634270] Freeing unused kernel memory: 344K
<4>[    1.638728] This architecture does not have kernel memory protection.
<6>[    1.709004] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
<5>[    1.716185] random: fast init done
<6>[    1.815007] usb 1-1.3: new high-speed USB device number 4 using ehci-brcm
<6>[    1.839474] usb-storage 1-1.3:1.0: USB Mass Storage device detected
<6>[    1.845995] scsi host2: usb-storage 1-1.3:1.0
<4>[    2.605770] hd51_1: loading out-of-tree module taints kernel.
<6>[    2.612857] usbcore: registered new interface driver tpm
<5>[    3.041700] scsi 2:0:0:0: Direct-Access     Lexar    USB Flash Drive  1100 PQ: 0 ANSI: 4
<5>[    3.050701] sd 2:0:0:0: Attached scsi generic sg0 type 0
<5>[    3.051138] sd 2:0:0:0: [sda] 15634432 512-byte logical blocks: (8.00 GB/7.46 GiB)
<5>[    3.052053] sd 2:0:0:0: [sda] Write Protect is off
<7>[    3.052060] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
<3>[    3.053047] sd 2:0:0:0: [sda] No Caching mode page found
<3>[    3.053051] sd 2:0:0:0: [sda] Assuming drive cache: write through
<6>[    3.057546]  sda: sda1
<5>[    3.069535] sd 2:0:0:0: [sda] Attached SCSI removable disk
<4>[    3.313768] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<4>[    4.627551] hd51: module_layout: kernel tainted.
<4>[    4.632224] Disabling lock debugging due to kernel taint
<6>[    7.196951] Console: switching to colour frame buffer device 160x45
<6>[    7.499702] input: dreambox remote control (native) as /devices/virtual/input/input0
<6>[    7.508014] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>[    7.665211] dvbdev: DVB: registering new adapter (dvb0)
<6>[    7.672959] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>[    7.680560] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
<6>[    7.946007] input: front panel as /devices/virtual/input/input2
<6>[    7.959362] Registered IR keymap rc-cec
<6>[    7.963615] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
<6>[    7.971131] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
<6>[    8.009069] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
<6>[    8.375380] usbcore: registered new interface driver cdc_acm
<6>[    8.381098] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    8.428765] Console: switching to colour dummy device 80x30
<6>[    9.289995] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[    9.299299] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[    9.409280] NET: Registered protocol family 10
<6>[    9.414454] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[    9.420473] Segment Routing with IPv6
<2>[    9.555259] EXT4-fs error (device mmcblk0p3): ext4_mb_generate_buddy:758: group 32, block bitmap and bg descriptor inconsistent: 8192 vs 4064 free clusters
<4>[    9.569291] JBD2: Spotted dirty metadata buffer (dev = mmcblk0p3, blocknr = 1). There's a risk of filesystem corruption in case of system crash.
<6>[   12.718081] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[   12.726414] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<5>[   30.279826] random: crng init done
<6>[   51.305060] sh (1857): drop_caches: 3
<6>[   52.254866] sh (1860): drop_caches: 3
<6>[   52.477207] sh (1863): drop_caches: 3
<6>[   52.687792] sh (1866): drop_caches: 3
<6>[   53.063724] sh (1869): drop_caches: 3
<5>[  332.767989] EXT4-fs (mmcblk0p3): error count since last fsck: 28
<5>[  332.774022] EXT4-fs (mmcblk0p3): initial error at time 346: ext4_mb_generate_buddy:758
<5>[  332.781953] EXT4-fs (mmcblk0p3): last error at time 9: ext4_mb_generate_buddy:758
<6>[  940.915060] sh (3882): drop_caches: 3
<6>[ 1836.460283] sh (5886): drop_caches: 3
<6>[ 2736.461244] sh (7891): drop_caches: 3
<6>[ 3636.466771] sh (9894): drop_caches: 3
<6>[ 4536.467611] sh (11900): drop_caches: 3
<6>[ 5436.472520] sh (13901): drop_caches: 3
<6>[ 6336.476331] sh (15890): drop_caches: 3
<6>[ 7236.477787] sh (17876): drop_caches: 3
<6>[ 8136.476178] sh (19885): drop_caches: 3
<6>[ 9036.479700] sh (21875): drop_caches: 3
<6>[ 9936.477832] sh (23865): drop_caches: 3
<6>[10836.481769] sh (25855): drop_caches: 3
<6>[11736.479223] sh (27878): drop_caches: 3
<6>[12636.485563] sh (29944): drop_caches: 3
<6>[13536.490449] sh (32005): drop_caches: 3
 

 



Re: New driver or new 6.2 #2 WanWizard

  • Forum Moderator
    PLi® Core member
  • 40,820 posts

+642
Excellent

Posted 22 May 2018 - 17:46

That should have been fixed in today's image.


Many answers to your question can be found in our new and improved wiki.

Currently in active use: HD2400 (4xS2)VU+Duo2 (3xS2)VU+Zero, Edision OS mini+, ET10000 (4xS2)

For testing purposes: XP1000Formuler F1 (2xS2)Miraclebox Premium Micro (S2+C/T),  ET7500 (S2)ET8500 (S2), Zgemma H2.H (S2+C)Zgemma H5.2TC (S2+C/T), SAB TripleAlpha (S2+C/T), Galaxy 4K (FBC), VU Zero 4K, Edision OS nino 


Re: New driver or new 6.2 #3 betacentauri

  • PLi® Core member
  • 4,178 posts

+206
Excellent

Posted 22 May 2018 - 17:50

Really terrestrial channels? No streams?

 

@WanWizard: My fix only affects streams with service ref 1:0:0...


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: New driver or new 6.2 #4 WanWizard

  • Forum Moderator
    PLi® Core member
  • 40,820 posts

+642
Excellent

Posted 22 May 2018 - 17:54

Ah, ok. More of these issues in the code?


Many answers to your question can be found in our new and improved wiki.

Currently in active use: HD2400 (4xS2)VU+Duo2 (3xS2)VU+Zero, Edision OS mini+, ET10000 (4xS2)

For testing purposes: XP1000Formuler F1 (2xS2)Miraclebox Premium Micro (S2+C/T),  ET7500 (S2)ET8500 (S2), Zgemma H2.H (S2+C)Zgemma H5.2TC (S2+C/T), SAB TripleAlpha (S2+C/T), Galaxy 4K (FBC), VU Zero 4K, Edision OS nino 


Re: New driver or new 6.2 #5 betacentauri

  • PLi® Core member
  • 4,178 posts

+206
Excellent

Posted 22 May 2018 - 18:00

Maybe... First we need to be sure that the user really didn't use streams and he uses the latest image.


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: New driver or new 6.2 #6 darkman13

  • Senior Member
  • 61 posts

0
Neutral

Posted 22 May 2018 - 18:05

it is....terrestrial...italia channel.....update everyday


Edited by darkman13, 22 May 2018 - 18:06.


Re: New driver or new 6.2 #7 ims

  • PLi® Core member
  • 9,586 posts

+157
Excellent

Posted 22 May 2018 - 18:09

try as first default PLi skin ( I hope, that AeonFHD_MOD/skin.xml do not replace python's file ) this is wrong and suspicious:

 

eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.


Edited by ims, 22 May 2018 - 18:10.

Kdo nic nedělá, nic nezkazí!

Re: New driver or new 6.2 #8 darkman13

  • Senior Member
  • 61 posts

0
Neutral

Posted 22 May 2018 - 18:14

ok..thanks...but also with default skin i have delay time,spinner...every time..when i touch the remote control :)

 

but today...crash in canale 5 HD

 

untitled.png



Re: New driver or new 6.2 #9 ims

  • PLi® Core member
  • 9,586 posts

+157
Excellent

Posted 22 May 2018 - 18:20

it is question, if your skin replace (or not) some enigma's files. Then change to default skin is for nothing...

 

Btw - this skin is in PLi feed ?


Edited by ims, 22 May 2018 - 18:21.

Kdo nic nedělá, nic nezkazí!

Re: New driver or new 6.2 #10 betacentauri

  • PLi® Core member
  • 4,178 posts

+206
Excellent

Posted 22 May 2018 - 18:29

I tried to reproduce with default skin like I did for the stream issue. I have zapped 1000 times between 2 DVB-T2 channels without a crash. Maybe really a skin problem.


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: New driver or new 6.2 #11 betacentauri

  • PLi® Core member
  • 4,178 posts

+206
Excellent

Posted 22 May 2018 - 19:17

@darkman13: Please flash a new image and test with standard skin.


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: New driver or new 6.2 #12 darkman13

  • Senior Member
  • 61 posts

0
Neutral

Posted 22 May 2018 - 19:27

ok...thanks all



Re: New driver or new 6.2 #13 Nazariy

  • Member
  • 6 posts

0
Neutral

Posted 24 May 2018 - 08:15

Hi, when will be update plugin bitrate viewer for openpli 6.2 tuner vu+4k series for the last drivers?


Edited by Nazariy, 24 May 2018 - 08:15.


Re: New driver or new 6.2 #14 Erik Slagter

  • PLi® Core member
  • 42,943 posts

+464
Excellent

Posted 8 June 2018 - 15:02

There are error messages in the dmesg about the flash, the file system integrity.


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)

I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.

Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users