Posted 26 May 2018 - 00:56
Is there a program/app/plugin/tool to change the colour of the RED/GREEN LED or control the LED segments (Mut@nt box) ? I need it because I made an unmount script for the USB HDD and I operate it with one of the Remote's hotkeys and I want it to change the LED segment or RED/GREEN LED if my script says the unmount has been succesful so that I don't need to turn my TV/monitor on.
Posted 26 May 2018 - 06:04
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 26 May 2018 - 17:03
Which box and is it possible to change the color, I was not aware of it...
I have a Mut@nt HD500c and it has a LED that is Green when in standby/operational and RED when the box is shutdown so it can be controlled. Also it has 4 LED-segments that are probably connected over the i2c bus and could possibly be controlled by a piece of linux compiled code (or plugin) or such. I'm gonna get a HD51 soon so if there is a tool to operate that box'es display or LED I'm interested too.
Posted 26 May 2018 - 17:18
Edited by littlesat, 26 May 2018 - 17:19.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 26 May 2018 - 22:09
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 28 May 2018 - 06:48
I'm adding a small example how to turn leds on and off.
LEDs.zip 283bytes
18 downloads
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 28 May 2018 - 06:52
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 28 May 2018 - 18:40
But to use this led for the usb remove is not that smart...
What can be unsmart about toggling this LED ? If you mean it should stay lit green when the box is booted up, I could instead of turning it off, flash it a couple of times and afterwards leave it on again.
Edited by maicod, 28 May 2018 - 18:41.
Posted 28 May 2018 - 18:41
I'm adding a small example how to turn leds on and off.
Thanks for the example.On my Mut@nt HD500c I only see /proc/stb/fp/lnb_sense0 and /proc/stb/fp/lnb_sense1 and not /proc/stb/fp/led0_pattern or /proc/stb/fp/led1_pattern. In your script I tried replacing them but that did not work.
Posted 28 May 2018 - 19:34
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 28 May 2018 - 21:00
No, /proc/stb/fp/lnb_sense1 is not for LED. What else you have on folder /proc/stb/fp ?
this:
root@hd500c:/proc/stb/fp# ls -l
-r--r--r-- 1 root root 0 May 28 21:59 lnb_sense0
-r--r--r-- 1 root root 0 May 28 21:59 lnb_sense1
-r--r--r-- 1 root root 0 May 28 21:59 rtc
-r--r--r-- 1 root root 0 May 28 21:59 wakeup_time
-r--r--r-- 1 root root 0 May 28 21:59 was_timer_wakeup
Posted 29 May 2018 - 19:29
None of them are associated with the LEDs. 
It is probably the box's led programming in other ways, not like dm900 and 920.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 29 May 2018 - 20:11
None of them are associated with the LEDs.
It is probably the box's led programming in other ways, not like dm900 and 920.
Thanks for your efforts to help. I'm suspecting they're controlled on a lower level by i2c.
0 members, 2 guests, 0 anonymous users
