Posted 14 December 2018 - 15:39
You can flash any image and the HDD will remains untouched.
But don't use the autorestore feature because it will probably restore also all the plugins that you have previously installed.
My advice is that you reinstall OpenPLi and start using it without installing any plugin (except your softcam and EPGimport) nor skin and give it a try to see how stable is your box.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 14 December 2018 - 16:25
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats 
Posted 16 December 2018 - 05:44
Flashed yesterday with 6.2, from scratch. Just channels put back from Dreamset, but always crash and freezes...
I have disabled and uninstalled some plugins, like cablescan that I don't need and we will see.
Next step, from scratch with original Vu+ image.
I'm beginning to ask me if there's no problem with this receiver, not the image, but the Duo2 itself.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Posted 16 December 2018 - 08:12
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 16 December 2018 - 10:09
I'm beginning to ask me if there's no problem with this receiver, not the image, but the Duo2 itself.
Indeed I came to the same conclusion as yours... I made some google search and find out reports similar crash as yours and the advice is to check (and replace) the capacitors and control the PSU output (Power Supply Unit).
I read someone else post on another forum: he sold its Duo2 on the internet because it has the same problem as you have (sudden unexpected crash), I hope you are not the one who purchase it from him.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 16 December 2018 - 10:17
You should consider reading this blog, seems that many Duo2 now needs to get repaired, this site propose a fixing services just contact them:
https://moltensolder...vu-duo2-faulty/
Pr2
Edited by Pr2, 16 December 2018 - 10:25.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 16 December 2018 - 11:06
Today, original Vu+ image, to start a clean situation. No Oscam, not user friendly, so, after that Op 6.2, without restauring config.
Channel list put by Dreamset, timer list created again because Timer restore doesn't work with DCC...
First browse in channel list, crash again. I AM DESPERATE, I don't no what to do with this receiver...
Here under the last crash log:
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Posted 16 December 2018 - 12:01
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 16 December 2018 - 12:47
I really think that your box has a hardware problem.
I agree. I just flashed my Duo 2, installed Oscam, HBBTV is already dafault present, tested with recordings, HBBTV, browsing etc but no crash.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 16 December 2018 - 12:52
Thanks for all your anwer. I think so that as in warranty, I will contact tomorrow the service which is in germany and see what they say...
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Posted 16 December 2018 - 13:01
Thanks for all your anwer. I think so that as in warranty, I will contact tomorrow the service which is in germany and see what they say...
I have to change my previous report. I just got a GSOD too while actually hardly doing anything. The box started to respond slowly so I wanted to check something via telnet. And suddenly GSOD.
As I hardly installed any plugins there seems to be some weird (driver)issue. I will report this to our Dev's. I do not think it's actually a driver issue as they haven't been changed from march 2018.
In the meantime you'd better use 6.2 for a while.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 16 December 2018 - 13:07
Many Duo2 are starting having hardware issues those last months... planned obsolescence?
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 16 December 2018 - 13:23
Many Duo2 are starting having hardware issues those last months... planned obsolescence?
Possible, but not well planned, mine is from April 2018 and I have problems for at least 3 or 4 months!
Edited by Raybobo, 16 December 2018 - 13:24.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Posted 16 December 2018 - 14:50
VU+ receivers could use better capacitors. I hoped Vu+ learned sth from Duo1 debacle, but its the same with Duo2.
Posted 16 December 2018 - 18:10
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 17 December 2018 - 05:55
Then if yours is still under warranty put back official image on it and ask for repair.
Done, waiting for answer from service in Germany.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Posted 4 January 2019 - 05:49
Hello everybody,
Duo2 back from service yesterday, NOTHING FOUND!
They only updated with an experimental version of Vti.
But, cannot use it, as there is no Oscam plugin in Vti..
So, back to Op6.2.
Now, as they have not found an hardware issue, is that possible that I have a problem due to my 2 Pcmcia Viaccess modules?
Or something in my configuration that's not working with OP?
I have to search for all the possible causes, because OP is really good, the Duo2 is really good too and I really want to use it as is maximum...
Thanks for your advice and help in my next investigations...
PS: At the moment, used only with Oscam, my 2 Pcmcia modules not inserted, this is the 1st test I can do now.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Posted 7 January 2019 - 05:41
Hi,
My Duo2 just arrived here on Friday, following the technician, nothing found.
It has worked good until yesterday, again a crash with a freeze and the spinner.
What did I have to look for?
I have installed again OP 6.2 as there is no Oscam in Vti, can it be a difference between Vti and OP? Did I have to go back to Vti and install manually Oscam to test it better?
I have not inserted my 2 Pcmcia Viaccess modules, thinking that maybe it can create this problem, but they are not concerned.
Another idea : we have power problems, that are not yet solved and often we only have 195-200 volts, can it be a source for this ?
If anybody has a idea on what to look for, thanks for the help.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Posted 7 January 2019 - 07:40
It probably is power problem, probably some capacitor dying. My Duo2 is also experiencing random freezes. Picture freezes, only audio is working. Also I cannot access box via network. After hard reset it works again.
0 members, 12 guests, 0 anonymous users
