12 replies to this topic

[gattone_16]

Hello everyone in the forum

Thank you for the excellent support you give to our satellite boxes

I have just bought a Zgemma H9S and I have not hesitated to immediately mount OpenPli my favorite image

But I find myself in the usual I'm getting mad to run the blue LED pen drive avermedia A867 digital terrestrial Kernel not compatible with architecture

I asked if some brains moderator can increase even in plug-ins this driver will thank you so much

[Pr2]

Hi,

 

The fact is that on Linux we don't care about the commercial name of a product but we care on the chipset used by the product.

So  once you found which chipset is inside the DVB USB stick it becomes easier to see if the driver exist and is supported.

 

A good start point is to:

- Connect the USB stick on your STB connect into telnet and type dmesg (then copy paste the last lines, related to the device you just plug).

- Also cut and paste the result (always in telnet) of the lsusb command.

 

Googling on site openpli.org bring me to this old post but who knows may be this can gives you some investigation path.

 

https://forums.openp...e-4#entry351309

 

Pr2

[gattone_16]

 

 

Attached Files

•  Cattura.JPG   20.36KB   0 downloads
•  Cattura.JPG   20.36KB   0 downloads

[gattone_16]

Bus 002 Device 002: ID 04a3:0101
Bus 003 Device 002: ID 07ca:a867
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0003

[Pr2]

please post also the 20 last lines of the dmesg output when you plug the tuner.

 

This one is the Avermedia Key:  Bus 003 Device 002: ID 07ca:a867 :   AVerTV DVB-T (A867)

Edited by Pr2, 19 June 2018 - 18:18.

[gattone_16]

                  

                                             

[gattone_16]

sorry but does not make me coppiare well

488 bytes (8 MiB, 72 LEBs)                                                     
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)                             
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 8D695337-F254-43B8-
AEE-40F981F89000, small LPT model                                              
VFS: Mounted root (ubifs filesystem) on device 0:14.                           
devtmpfs: mounted                                                              
Freeing unused kernel mem

devtmpfs: mounted                                        
Freeing unused kernel memory: 540K (c0ac9000 - c0b50000)

0                                                                        
DVB: registering new adapter (dvb0)                                      
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...       
input: front panel as /devices/virtual/input/input1                      
Mali: Mali device driver loaded                                          
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready                       
hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow c

[gattone_16]

                  

                                             

Attached Files

•  h9s1.PNG   67.28KB   2 downloads

[Pr2]

Unplug your USB tuner.

Restart the box, and wait for it to finish starting.

Connect to telnet perform a dmesg, check the last lines (I don't need them).

 

Connect the USB tuner, type dmesg and you should have new lines in the dmesg output. Those new lines should indicates what happens when you connect the USB tuner.

[gattone_16]

 h9s 2.PNG   69.97KB   0 downloads

[gattone_16]

 hs9-3.PNG   185.83KB   1 downloads

[Rendal-Raines]

Hello

I have the same problem

are there any solutions?

 

send my log

 

 sda: sda1                                                                     

sd 0:0:0:0: [sda] Attached SCSI removable disk                                 

Freeing unused kernel memory: 536K (c0a6a000 - c0af0000)                       

This architecture does not have kernel memory protection.                      

FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Ple

se run fsck.                                                                   

usbcore: registered new interface driver tpm                                   

HI_DRV_SPI_Init success                                                        

hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok                   

spi spi0.0: invalid chip select                                                

hi_spi spi0.0: invalid chip select                                             

hi_spi spi0.0: invalid chip select                                             

input: dreambox advanced remote control (native) as /devices/virtual/input/inpu

0                                                                              

DVB: registering new adapter (dvb0)                                            

platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...             

input: front panel as /devices/virtual/input/input1                            

Mali: Mali device driver loaded                                                

SGI XFS with ACLs, security attributes, realtime, no debug enabled             

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready                             

hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx      

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready                        

usb 1-1: new high-speed USB device number 3 using ehci-platform                

root@zgemmah9s:~# 

[drHouse]

sorry I do not understand your solution.

I solved the problem with usb dtt avermedia a867

thank you