With a VU + Solo 4K, I will be able to see/record 8 channels instead of 4 from 1 LNB if I change them?
Change from http://www.x-sat.no/...scr4-satcr.html to http://www.inverto.t...-lnb-with-32-ub
Posted 21 June 2018 - 21:05
With a VU + Solo 4K, I will be able to see/record 8 channels instead of 4 from 1 LNB if I change them?
Change from http://www.x-sat.no/...scr4-satcr.html to http://www.inverto.t...-lnb-with-32-ub
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Posted 22 June 2018 - 05:05
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 22 June 2018 - 06:50
Edited by betacentauri, 22 June 2018 - 06:51.
Posted 22 June 2018 - 07:38
Hi,
some people tested 20 recordings and had no problems. I think the new bottleneck is the user because who needs this. For me the biggest advantage is that I am not limited to 1 transponder is I only have 1 legacy cable.
Imagine with 2 FBC tuner cards installed you are theoretically able to record around >50 HD channel or >100 SD channel at the same time:-) Ok here you might get performance problems.
ciao
Edited by Trial, 22 June 2018 - 07:42.
Posted 22 June 2018 - 10:25
One of our members has a complete JESS setup, and is able to fully max out the Ultimo 4K. So I shouldn't be too worried about that. The box will run out of decoding capability before it runs out of anything else.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 22 June 2018 - 11:26
This one
Eight LNB's connected using the two FBC inputs, plus a "conventional" dual tuner, plus FBC C tuner, makes 18 tuners, all of them usable without restrictions, no problems seen so far...
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 22 June 2018 - 14:18
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 22 June 2018 - 14:19
Erik records on a NAS, he doesn't use local disks.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 22 June 2018 - 14:26
My NAS can do 60 Mbps and I never see interruptions in recordings. I think my top (real life) use is about eight tuners. I am not doing any business stuff with it, so I am not really that interested, if it works for myself, I am ok with it.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 23 June 2018 - 08:38
Eight will work (as long as you don't burn up your subscriber card).
Edited by Erik Slagter, 23 June 2018 - 18:52.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 23 June 2018 - 18:43
Eight will work (as long as you don't burn up your subcriber card).
Then I'll get a new one... ;-)
I understand that it was humour but be careful, if you card gets locked you will have to send back your card to your provider, they will check it and if it is due to the protection in the card that count too many simultaneous access on it, your provider will consider that you are doing illegal stuff (CS) and will refuse to replace the card. Think that official STB or labelled STB don't have such huge recording capability so they will never "burn" the official card.
This is true for Viaccess provider.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 23 June 2018 - 18:53
Most cards will, however, only start to give out random, false control words.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 23 June 2018 - 19:30
Viaccess card lock itself and no possibility to unlock it.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 12 July 2018 - 05:42
With the Solo 4K and the Unicable II LNB you will be able to record from up to 8 transponders simultaneously. And it only requires one aerial cable. I'm using that LNB here too for 28 east.
Is it possible to get 4 unicable II LNB 's on 1 satdish
For Astra1, Astra2, Astra3 en Hotbird ???
@ the moment my setup is now
1 SatDish
4 Twin LNB
2 4/1 Disqc Switches.
1 Formuler F1 (satbox)
Digibit R1 (with sat-exe firmware)
2 Coax cables coming in the house
WOuld like to expand that and make more use of the digibit
Or better to replace the twin LNB into Quad LNB 's
What piece of hardware should i need then
0 members, 2 guests, 0 anonymous users