16 replies to this topic

[fervino]

Good morning, unloading normally epgImport but do not install it
Something is missing?

 

 

 

Attached Files

•  0101.jpg   14.07KB   4 downloads

[littlesat]

Sounds like you installed the plugin from a different source and not ours...

Edited by littlesat, 1 September 2018 - 11:13.

[doglover]

Install the plug-in (EPGimport) from the feed of your image.

Do not use versions which you got from somewhere on the net.

 

Willy

[fervino]

Of course I installed it from the image, not only he also plugs and does not install them
In fact there is no more epginport in the list

 

 

Attached Files

•  eppg.jpg   65.09KB   3 downloads

[Abu Baniaz]

PLI does not use box branding.

 

Which receiver are you using?

Which image are you using?

[doglover]

This box branding remark, is a good indication you are using something outside of OpenPLi.

 

Willy

[fervino]

It is openPli 6.2

Vu+ solo SE

 

A picture is worth + 1000 words

Attached Files

•  003.jpg   71.23KB   3 downloads

Edited by fervino, 2 September 2018 - 07:35.

[littlesat]

The image is pli’s but the plugin (or something else) not

[fervino]

It is possible that a no plugin was used from the feed at the beginning
Now that I can not find the plug-in in the list as a remedy anymore?

[fervino]

Already tried to remove the plugin and in fact after appears in the list, but does not install

[doglover]

Check the files in /etc/opkg/ and see if there are other sources besides openpli are listed.

Because it looks like you are downloading this file from an alternative location.

 

If one is present, delete it.  Next try installing again.

 

Willy

[Pr2]

Connect in telnet and type:

opkg update
opkg list | grep epgimport

Then

opkg list-installed | grep epgimport

And show both result here, telnet is just text so you can normally just cut and paste it (except if you use DCC).

 

Pr2

[fervino]

openpli 6.2-release vusolose

vusolose login: root
Last login: Sun Sep 2 11:33:28 CEST 2018 on pts/0
root@vusolose:~# opkg update
Downloading http://downloads.openpli.org/feeds/openpli-6-release/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.openpli.org/feeds/openpli-6-release/3rd-party-vusolose/Packages.gz.
Updated source 'openpli-3rd-party-vusolose'.
Downloading http://downloads.openpli.org/feeds/openpli-6-release/all/Packages.gz .
Updated source 'openpli-all'.
Downloading http://downloads.openpli.org/feeds/openpli-6-release/mips32el/Packages.gz.
Updated source 'openpli-mips32el'.
Downloading http://downloads.openpli.org/feeds/openpli-6-release/vusolose/Packages.gz.
Updated source 'openpli-vusolose'.
root@vusolose:~# opkg list | grep epgimport
enigma2-plugin-extensions-epgimport - 1.0+git140+aff303e-r0.0 - enigma2-plugin-extensions-epgimport version 1.0+gitAUTOINC+aff303e12d-r0
enigma2-plugin-extensions-epgimport-rytec - 20180718-r0.0 - enigma2-plugin-extensions-epgimport-rytec version 20180718-r0 Rytec's
enigma2-plugin-extensions-epgimportfilter - 1.0+git12+911e8bb-r0.3 - enigma2-plugin-extensions-epgimportfilter version
root@vusolose:~# opkg list-installed | grep epgimport
enigma2-plugin-extensions-epgimport - 1.0+git140+aff303e-r0.0
enigma2-plugin-extensions-epgimport-rytec - 20180718-r0.0
root@vusolose:~# ^C
root@vusolose:~#

Edited by WanWizard, 2 September 2018 - 12:42.
fixed formatting

[fervino]

Yes, after the putty commands you install epg inport
I thank everyone for their help

[Pr2]

Hi,

 

The command I gave you install nothing. It is just a way to display the available package on feed and the one you really install locally.

So the command cannot fix anything.

 

But if it is fine for you now this is the most important.

 

Pr2

[fervino]

As you understand, I'm not good at understanding the commands
But the fact is that after sending the commands I restarted and the working application appeared
Thanks again

[Pr2]

Some plugin requires a reboot of the box to have them fully functionnal.

So after installing new plugins, if you have some strange behavior or you didn't find them, first reboot your box and retry.