9 replies to this topic

[SurvivorZ]

hi guys, i don't think that there is a good working retro games emulator that works on enigma2

maybe some devs can take a look at this goos thing and try to bring it to our devices

the emulator works on almost any existing OS at this time

so... why not the Enigma2 also !

 

https://www.retroarch.com/

[Pr2]

Hi,

 

A STB is not a PC there is indeed a CPU that it is called a SoC which is specifically designed to handle DVB signal and has some build-in multimedia decoding capabilities, so it doesn't have all the same capabilities as a PC.

So it doesn't really make sense willing to run every possible Linux/PC/OSx application on a STB.

 

Pr2

[littlesat]

Maybe some hackers discover how it might work...

[mrvica]

Linux games

http://lgames.sourceforge.net/

on ihad board there is lbreakout and ltris for armhf

http://www.i-have-a-...?postid=2210467

https://dreambox.de/...d/23686-lgames/

[leandrotsampa]

Hi, I'm running with success RetroArch in my E2.

I think the most important is the hardware and the architecture (arm/armhf I think is more easy).

 

For now I'm using a Hisilicon Hi3798Cv200 with 2GB RAM.

But I think is possible apply this for other's architectures.

[WTE]

Hi, I'm running with success RetroArch in my E2.

I think the most important is the hardware and the architecture (arm/armhf I think is more easy).

 

For now I'm using a Hisilicon Hi3798Cv200 with 2GB RAM.

But I think is possible apply this for other's architectures.

 

 

HI3798CV200 is actually the same as HI3798MV200 which is used by some Openpli enigma2 boxes.

So can you inform a bit more how you install it and which sources are used to build it.

So do you have an openembedded packages which you build?

Edited by WTE, 15 March 2019 - 22:38.

[WTE]

I assume you used the follow packages for build https://github.com/c...s/meta-libretro

 

I will try next week to build and see if I get it work. Only issue is X11 which I do not prefer

I wonder how it will work with remote or that you need a gamepad.

Edited by WTE, 15 March 2019 - 22:45.

[leandrotsampa]

 

Hi, I'm running with success RetroArch in my E2.

I think the most important is the hardware and the architecture (arm/armhf I think is more easy).

 

For now I'm using a Hisilicon Hi3798Cv200 with 2GB RAM.

But I think is possible apply this for other's architectures.

 

 

HI3798CV200 is actually the same as HI3798MV200 which is used by some Openpli enigma2 boxes.

So can you inform a bit more how you install it and which sources are used to build it.

So do you have an openembedded packages which you build?

 

 

Sorry of delay, HI3798MV200 and HI3798CV200 have a compatible SDK but I'm using E2 long before have a for HI3798MV200.

I maked a Debian 9.5 rootfs and compiled all enigma2 packages, now I can compile all direct in my box.

 

For RetroArch, I'm not need make big changes I only create a UDEV rule for put my RC as a KEYBOARD for RetroArch detect this.

My git for RetroArch: https://github.com/l...sampa/RetroArch

My topic in libretro forum: https://forums.libre...n-enigma2/21306

[leandrotsampa]

I assume you used the follow packages for build

 

I will try next week to build and see if I get it work. Only issue is X11 which I do not prefer

I wonder how it will work with remote or that you need a gamepad.

 

I'm using OpenGL 3.1 (mali-fbdev) and created a launcher based on Kodi Launcher of E2.

I only use remote for navegate on MENU, to play game is better gamepad.

[littlesat]