Why do I have to connect tuner A, when I want to have a picture/tune in? When I only connect tuner B there is no picture, although the signal finder has 85% SNR?
(BTW in the settings preferred tuner is auto)
5 replies to this topic
#1
-
- Forum Moderator
PLi® Contributor - 5,956 posts
+191
Excellent
Posted 8 September 2018 - 16:59
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: FBC #2
-
- PLi® Core member
- 70,528 posts
+1,811
Excellent
Posted 8 September 2018 - 17:03
If you have not configured tuner A as "not connected", the box will use that tuner first (assuming the config for A and B are the same). It can't know the tuner has no cable connected to it.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: FBC #3
-
- Forum Moderator
PLi® Contributor - 5,956 posts
+191
Excellent
Posted 9 September 2018 - 10:19
You are right, then the "auto" setting under Customize doesn't work the way I expected.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: FBC #4
-
- PLi® Core member
- 70,528 posts
+1,811
Excellent
Posted 9 September 2018 - 14:25
Auto means Enigma auto selects the tuner with the least reception options.
For example, if you have A with 13, 19.2, 23.5 and 28.2, and you have B with 19.2 and 23.5, a tune or record of a 23.5 channel will select tuner B, as A has more "on offer".
It doesn't mean: I'm not receiving anything on this tuner, lets try another one.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: FBC #5
-
- Forum Moderator
PLi® Contributor - 5,956 posts
+191
Excellent
Posted 9 September 2018 - 15:09
Crystal clear, that's the difficulty with terms like "auto", one can assume things and "assumption is the mother of all f...upps" 
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: FBC #6
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 14 September 2018 - 09:58
You shouldn't have to mess with these settings. Just make sure the tuner setup is correct and it will all work.
Make sure the tuner setup is correct includes:
- only enable tuner A when a cable is connected to input #1
- only enable tuner B when a cable is connected to input #2
After that, enigma will take to select and loop through all relevant tuners.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Also tagged with one or more of these keywords: Vu Uno 4k SE
Vu+ UNO 4k Se loopt vast bij gebruik mediaplayerStarted by JoFa, 1 Jun 2023  VU UNO 4K SE, Mediaplayer
|
|
|
||
crash VU uno 4K SE tijdens zappen icm opnameStarted by jacques1971, 14 Aug 2018 VU uno 4K SE
|
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
