FWIW, made a quick test with my old unicable1 setup - unicable1 lnb (some budget Sharp), with vs1500 and osmega (both twins) connected to it, all 4 scr's used
4 manual timers set, from different transponders, to start at the very same time, boxes put in standby - all recordings were ok (?)
Unicable / simultaneous recordings
Started by Huevos, 19 Sep 2018 11:41
342 replies to this topic
Re: Unicable / simultaneous recordings #41
-
- PLi® Core member
- 2,270 posts
+118
Excellent
Posted 23 September 2018 - 13:18
True sarcasm doesn't need green font...
Re: Unicable / simultaneous recordings #42
-
- PLi® Contributor
- 4,760 posts
+167
Excellent
Posted 23 September 2018 - 13:48
<timer begin="1537706520" end="1537708800" serviceref="1:0:19:1B1D:802:2:11A0000:0:0:0:" repeated="0" rename_repeat="1" name="Hold the Sunset" description="6/6. Old Flames: Sitcom. Phil is worried that Edith's old flame Bob may be gaining ground and that his own one-time floozy Desiree may put in an unwelcome appearance. [HD] [AD,S]" afterevent="auto" eit="54282" tags="†Hold_the_Sunset‡" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> </timer> <timer begin="1537706521" end="1537708800" serviceref="1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD" repeated="0" rename_repeat="1" name="£10k Holiday Home" description="Julia has the end in sight, but has she managed to make her dream of a 10,000-pound holiday home into a reality? Has she come in on budget, and what will the locals think? [AD,S,HD] S1 Ep6" afterevent="auto" eit="9680" tags="£10k_Holiday_Home" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> </timer> <timer begin="1537706522" end="1537708800" serviceref="1:0:1:189D:7FD:2:11A0000:0:0:0:" repeated="0" rename_repeat="1" name="Hold the Sunset" description="6/6. Old Flames: Sitcom. Phil is worried that Edith's old flame Bob may be gaining ground and that his own one-time floozy Desiree may put in an unwelcome appearance. Also in HD. [AD,S]" afterevent="auto" eit="54282" tags="Hold_the_Sunset" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> </timer>
All timers appear to have started.
Re: Unicable / simultaneous recordings #43
-
- PLi® Contributor
- 6,194 posts
+261
Excellent
Posted 23 September 2018 - 14:11
I a fifo queue is created to send the command I think that we don't have to set a delay, I rather think that we have a bus collision since we send 2 or 3 commands exactly at the same time to it.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Unicable / simultaneous recordings #44
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 23 September 2018 - 14:46
<timer begin="1537706520" end="1537708800" serviceref="1:0:19:1B1D:802:2:11A0000:0:0:0:" repeated="0" rename_repeat="1" name="Hold the Sunset" description="6/6. Old Flames: Sitcom. Phil is worried that Edith's old flame Bob may be gaining ground and that his own one-time floozy Desiree may put in an unwelcome appearance. [HD] [AD,S]" afterevent="auto" eit="54282" tags="†Hold_the_Sunset‡" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> </timer> <timer begin="1537706521" end="1537708800" serviceref="1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD" repeated="0" rename_repeat="1" name="£10k Holiday Home" description="Julia has the end in sight, but has she managed to make her dream of a 10,000-pound holiday home into a reality? Has she come in on budget, and what will the locals think? [AD,S,HD] S1 Ep6" afterevent="auto" eit="9680" tags="£10k_Holiday_Home" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> </timer> <timer begin="1537706522" end="1537708800" serviceref="1:0:1:189D:7FD:2:11A0000:0:0:0:" repeated="0" rename_repeat="1" name="Hold the Sunset" description="6/6. Old Flames: Sitcom. Phil is worried that Edith's old flame Bob may be gaining ground and that his own one-time floozy Desiree may put in an unwelcome appearance. Also in HD. [AD,S]" afterevent="auto" eit="54282" tags="Hold_the_Sunset" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> </timer>All timers appear to have started.
Ok, it seems like a racing, but racing in equipment? in drivers? in e2?
Try once again a locker, this time before setting frontend.
@@ -1665,6 +1665,7 @@ int eDVBFrontend::tuneLoopInt() // called by m_tuneTimer
{
int enableEvents = (m_sec_sequence.current()++)->val;
eDebugNoSimulate("[eDVBFrontend] setFrontend %d", enableEvents);
+ eSingleLocker s(lock);
setFrontend(enableEvents);
break;
}
PS. Remove last locker in tuneLoop, since it causes "deadlock!".
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Unicable / simultaneous recordings #45
-
- PLi® Contributor
- 4,760 posts
+167
Excellent
Posted 23 September 2018 - 15:13
Thanks to everyone contributing to this thread...
Just before adding this new patch I have retried 1 second intervals just to be certain.
I set 3 timers and all 3 started and were successful.
<timer begin="1537710901" end="1537713900" serviceref="1:0:1:2758:7FC:2:11A0000:0:0:0:" repeated="0" rename_repeat="1" name="Police Academy 2: Their First Assignment" description="Comedy sequel starring Steve Guttenberg and Bubba Smith, 1985. The Police Academy graduates tackle a gang of graffiti artists terrorising a local community. [AD,S]" afterevent="auto" eit="27635" tags="Police_Academy_2:_Their_First_Assignment" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> <log code="15" time="1537710355">record time changed, start prepare is now: Sun Sep 23 15:54:40 2018</log> </timer> <timer begin="1537710902" end="1537712700" serviceref="1:0:1:2419:7F9:2:11A0000:0:0:0:" repeated="0" rename_repeat="1" name="Young Sheldon" description="A Mother, a Child, and a Blue Man's Backside: When Mary bans Sheldon from reading a comic book, he decides it's time to stop living under his mother's thumb. (S1 Ep18/22)" afterevent="auto" eit="41848" tags="†Young_Sheldon‡" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> <log code="15" time="1537710440">record time changed, start prepare is now: Sun Sep 23 15:54:40 2018</log> </timer> <timer begin="1537710903" end="1537713300" serviceref="1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD" repeated="0" rename_repeat="1" name="Catchphrase" description="Stephen Mulhern hosts the game show. Amanda, Manish and Charlotte try to guess the familiar phrases hidden in animated clues - but who will make it to the Super Catchphrase? S4 Ep7" afterevent="auto" eit="106" tags="†Catchphrase‡" justplay="0" always_zap="0" pipzap="0" conflict_detection="1" descramble="1" record_ecm="0" isAutoTimer="0"> <log code="15" time="1537710466">record time changed, start prepare is now: Sun Sep 23 15:54:40 2018</log> </timer>
< 8760.805> [RecordTimer] activating state 1 < 8760.806> [RecordTimer] Found enough free space to record < 8760.807> [RecordTimer] Filename calculated as: '/media/hdd/movie/20180923 1555 - ITV4 - Police Academy 2_ Their First Assignment' < 8760.807> [Navigation] recording service: 1:0:1:2758:7FC:2:11A0000:0:0:0: < 8760.807> [eDVBResourceManager] allocate channel.. 07fc:0002 < 8760.807> [eDVBResourceManager] available channel.. 0814:0002 < 8760.807> [eDVBResourceManager] available channel.. 0002:0040 < 8760.808> [eDVBFrontend] opening frontend 0 < 8760.811> [eDVBFrontend] (0)tune < 8760.811> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0xcd, guard_offset 0 < 8760.812> **** Tuning JESS < 8760.812> **** frequency_mhz: 10758 < 8760.812> **** lo_mhz: 9750 < 8760.812> **** T: 908 < 8760.812> **** position: 0 < 8760.812> **** ub: 0 < 8760.812> **** mode: 0 < 8760.812> **** JESS: 70 03 8c 00 < 8760.812> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 8760.812> [eDVBFrontend] prepare_sat System 0 Freq 10758500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0 < 8760.812> [eDVBFrontend] tuning to 1211 mhz < 8760.812> [eDVBChannel] OURSTATE: tuning < 8760.812> [eDVBServicePMTHandler] allocate Channel: res 0 < 8760.812> [eDVBCIInterfaces] addPMTHandler 1:0:1:2758:7FC:2:11A0000:0:0:0: < 8760.812> [eDVBChannel] getDemux cap=00 < 8760.812> [eDVBResourceManager] allocate demux cap=00 < 8760.812> [eDVBResourceManager] allocating demux adapter=0, demux=2, source=-1 fesource=0 < 8760.812> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8760.813> [eEPGCache] saveEventToFile epg event id 6bf3 < 8760.813> [RecordTimer] prepare ok, waiting for begin < 8760.814> [Trashcan] Recording(s) in progress: 1 < 8760.815> [eDVBFrontend] set static current limiting < 8760.815> [eDVBFrontend] invalidate current switch params < 8760.815> [eDVBFrontend] setVoltage 1 < 8760.816> [eDVBFrontend] sleep 1500ms < 8761.751> [RecordTimer] activating state 1 < 8761.752> [RecordTimer] Found enough free space to record < 8761.753> [RecordTimer] Filename calculated as: '/media/hdd/movie/20180923 1555 - E4 - Young Sheldon' < 8761.753> [Navigation] recording service: 1:0:1:2419:7F9:2:11A0000:0:0:0: < 8761.753> [eDVBResourceManager] allocate channel.. 07f9:0002 < 8761.753> [eDVBResourceManager] available channel.. 0814:0002 < 8761.753> [eDVBResourceManager] available channel.. 0002:0040 < 8761.753> [eDVBResourceManager] available channel.. 07fc:0002 < 8761.754> [eDVBFrontend] opening frontend 3 < 8761.756> [eDVBFrontend] (3)tune < 8761.756> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x28f6, guard_offset 0 < 8761.756> **** Tuning JESS < 8761.756> **** frequency_mhz: 10714 < 8761.756> **** lo_mhz: 9750 < 8761.756> **** T: 864 < 8761.756> **** position: 0 < 8761.756> **** ub: 1 < 8761.756> **** mode: 2 < 8761.756> **** JESS: 70 0b 60 02 < 8761.756> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 8761.756> [eDVBFrontend] prepare_sat System 0 Freq 10714000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0 < 8761.756> [eDVBFrontend] tuning to 1420 mhz < 8761.756> [eDVBChannel] OURSTATE: tuning < 8761.756> [eDVBServicePMTHandler] allocate Channel: res 0 < 8761.756> [eDVBCIInterfaces] addPMTHandler 1:0:1:2419:7F9:2:11A0000:0:0:0: < 8761.756> [eDVBChannel] getDemux cap=00 < 8761.756> [eDVBResourceManager] allocate demux cap=00 < 8761.756> [eDVBResourceManager] allocating demux adapter=0, demux=3, source=-1 fesource=3 < 8761.756> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8761.757> [eEPGCache] saveEventToFile epg event id a378 < 8761.757> [RecordTimer] prepare ok, waiting for begin < 8761.758> [Trashcan] Recording(s) in progress: 1 < 8761.759> [eDVBFrontend] set static current limiting < 8761.760> [eDVBFrontend] invalidate current switch params < 8761.760> [eDVBFrontend] set sequence pos 3 < 8761.760> [eDVBFrontend] setVoltage 2 < 8761.761> [eDVBFrontend] setTone 0 < 8761.762> [eDVBFrontend] sleep 75ms < 8761.893> [eDVBFrontend] sendDiseqc: 700b6002(?) < 8761.893> [eDVBFrontend] sleep 100ms < 8761.993> [eDVBFrontend] setVoltage 1 < 8761.994> [eDVBFrontend] update current switch params < 8761.994> [eDVBFrontend] startTuneTimeout 5000 < 8761.994> [eDVBFrontend] setFrontend 1 < 8761.994> [eDVBFrontend] setting frontend 3 < 8762.001> [eDVBFrontend] (3)fe event: status 0, inversion off, m_tuning 1 < 8762.001> [eDVBFrontend] sleep 500ms < 8762.050> [eDVBFrontend] (3)fe event: status 7, inversion off, m_tuning 2 < 8762.102> [eDVBFrontend] (3)fe event: status 1f, inversion off, m_tuning 3 < 8762.102> [eDVBChannel] OURSTATE: ok < 8762.102> [eDVBLocalTimerHandler] channel 0x19c50f8 running < 8762.102> [eDVBChannel] getDemux cap=00 < 8762.102> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.103> [eDVBSectionReader] DMX_SET_FILTER pid=20 < 8762.103> [eEPGCache] channel 0x19c50f8 running < 8762.103> [eDVBChannel] getDemux cap=00 < 8762.103> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.103> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.104> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.104> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.104> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.104> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.104> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.104> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.104> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.105> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.105> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.105> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.105> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.105> [eDVBResourceManager] stop release channel timer < 8762.105> [eEPGCache] next update in 2 sec < 8762.105> [eDVBChannel] getDemux cap=01 < 8762.105> [eDVBResourceManager] allocate demux cap=01 < 8762.105> [eDVBResourceManager] allocating shared demux adapter=0, demux=3, source=3 < 8762.105> [eDVBServicePMTHandler] ok ... now we start!! < 8762.105> [eDVBServiceRecord] RECORD service event 5 < 8762.106> [eDVBCAService] new service 1:0:1:2419:7F9:2:11A0000:0:0:0: < 8762.106> [eDVBCAService] add demux 3 to slot 0 service 1:0:1:2419:7F9:2:11A0000:0:0:0: < 8762.106> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.106> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8762.106> [eDVBServiceRecord] RECORD service event 6 < 8762.106> [eDVBServiceRecord] tuned.. < 8762.106> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.107> [eDVBSectionReader] DMX_SET_FILTER pid=18 < 8762.107> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.107> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8762.215> [eDVBServicePMTHandler] PATready < 8762.215> [eDVBServicePMTHandler] use pmtpid 0107 for service_id 2419 < 8762.215> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.216> [eDVBSectionReader] DMX_SET_FILTER pid=263 < 8762.216> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.216> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8762.217> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.217> [eDVBSectionReader] DMX_SET_FILTER pid=256 < 8762.218> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.218> [eDVBSectionReader] DMX_SET_FILTER pid=17 < 8762.316> [eDVBFrontend] setVoltage 2 < 8762.317> [eDVBFrontend] setTone 0 < 8762.318> [eDVBFrontend] sleep 75ms < 8762.323> [eDVBServiceRecord] RECORD service event 5 < 8762.324> [eDVBCIInterfaces] gotPMT < 8762.326> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.327> [eDVBSectionReader] DMX_SET_FILTER pid=263 < 8762.449> [eDVBFrontend] sendDiseqc: 70038c00(?) < 8762.449> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.450> [eDVBSectionReader] DMX_SET_FILTER pid=257 < 8762.450> [eDVBFrontend] sleep 100ms < 8762.501> [eDVBFrontend] set dynamic current limiting < 8762.550> [eDVBFrontend] setVoltage 1 < 8762.551> [eDVBFrontend] update current switch params < 8762.551> [eDVBFrontend] startTuneTimeout 5000 < 8762.551> [eDVBFrontend] setFrontend 1 < 8762.551> [eDVBFrontend] setting frontend 0 < 8762.554> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1 < 8762.554> [eDVBFrontend] sleep 500ms < 8762.601> [eDVBFrontend] (0)fe event: status 7, inversion off, m_tuning 2 < 8762.623> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.624> [eDVBSectionReader] DMX_SET_FILTER pid=258 < 8762.652> [eDVBFrontend] (0)fe event: status 1f, inversion off, m_tuning 3 < 8762.652> [eDVBChannel] OURSTATE: ok < 8762.652> [eDVBLocalTimerHandler] channel 0x1988f10 running < 8762.652> [eDVBChannel] getDemux cap=00 < 8762.652> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.652> [eDVBSectionReader] DMX_SET_FILTER pid=20 < 8762.653> [eEPGCache] channel 0x1988f10 running < 8762.653> [eDVBChannel] getDemux cap=00 < 8762.653> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.653> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.653> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.653> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.653> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.653> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.654> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.654> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.654> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.654> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.654> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.654> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.654> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.655> [eDVBChannel] getDemux cap=01 < 8762.655> [eDVBResourceManager] allocate demux cap=01 < 8762.655> [eDVBResourceManager] allocating shared demux adapter=0, demux=2, source=0 < 8762.655> [eDVBServicePMTHandler] ok ... now we start!! < 8762.655> [eDVBServiceRecord] RECORD service event 5 < 8762.655> [eDVBCAService] new service 1:0:1:2758:7FC:2:11A0000:0:0:0: < 8762.655> [eDVBCAService] add demux 2 to slot 0 service 1:0:1:2758:7FC:2:11A0000:0:0:0: < 8762.655> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.655> [eEPGCache] next update in 2 sec < 8762.655> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8762.656> [eDVBServiceRecord] RECORD service event 6 < 8762.656> [eDVBServiceRecord] tuned.. < 8762.656> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.656> [eDVBSectionReader] DMX_SET_FILTER pid=18 < 8762.656> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.657> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8762.714> [eDVBServicePMTHandler] PATready < 8762.714> [eDVBServicePMTHandler] use pmtpid 0108 for service_id 2758 < 8762.714> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.715> [eDVBSectionReader] DMX_SET_FILTER pid=264 < 8762.715> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.715> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8762.716> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.717> [eDVBSectionReader] DMX_SET_FILTER pid=261 < 8762.717> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8762.717> [eDVBSectionReader] DMX_SET_FILTER pid=17 < 8762.749> [RecordTimer] activating state 1 < 8762.750> [RecordTimer] Found enough free space to record < 8762.751> [RecordTimer] Filename calculated as: '/media/hdd/movie/20180923 1555 - ITV London HD - Catchphrase' < 8762.751> [Navigation] recording service: 1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD < 8762.751> [eDVBResourceManager] allocate channel.. 0812:0002 < 8762.751> [eDVBResourceManager] available channel.. 0814:0002 < 8762.751> [eDVBResourceManager] available channel.. 0002:0040 < 8762.751> [eDVBResourceManager] available channel.. 07fc:0002 < 8762.752> [eDVBResourceManager] available channel.. 07f9:0002 < 8762.752> [eDVBFrontend] opening frontend 4 < 8762.754> [eDVBFrontend] (4)tune < 8762.754> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x4197, guard_offset 0 < 8762.754> **** Tuning JESS < 8762.754> **** frequency_mhz: 11097 < 8762.754> **** lo_mhz: 9750 < 8762.754> **** T: 1247 < 8762.754> **** position: 0 < 8762.754> **** ub: 2 < 8762.754> **** mode: 0 < 8762.754> **** JESS: 70 14 df 00 < 8762.754> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 8762.754> [eDVBFrontend] prepare_sat System 1 Freq 11097000 Pol 1 SR 23000000 INV 2 FEC 3 orbpos 282 system 1 modulation 2 pilot 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0 < 8762.754> [eDVBFrontend] tuning to 1681 mhz < 8762.754> [eDVBChannel] OURSTATE: tuning < 8762.754> [eDVBServicePMTHandler] allocate Channel: res 0 < 8762.754> [eDVBCIInterfaces] addPMTHandler 1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD < 8762.754> [eDVBChannel] getDemux cap=00 < 8762.754> [eDVBResourceManager] allocate demux cap=00 < 8762.754> [eDVBResourceManager] allocating demux adapter=0, demux=4, source=-1 fesource=4 < 8762.754> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8762.781> [eEPGCache] saveEventToFile epg event id 6a < 8762.782> [RecordTimer] prepare ok, waiting for begin < 8762.782> [Trashcan] Recording(s) in progress: 1 < 8762.784> [eDVBFrontend] set static current limiting < 8762.784> [eDVBFrontend] invalidate current switch params < 8762.784> [eDVBFrontend] set sequence pos 3 < 8762.784> [eDVBFrontend] setVoltage 2 < 8762.785> [eDVBFrontend] setTone 0 < 8762.786> [eDVBFrontend] sleep 75ms < 8762.823> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8762.823> [eDVBSectionReader] DMX_SET_FILTER pid=259 < 8762.916> [eDVBFrontend] sendDiseqc: 7014df00(?) < 8762.917> [eDVBLocalTimerHandler] diff is -1 < 8762.917> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time < 8762.917> [eDVBLocalTimerHandler] set RTC Time < 8763.020> [eDVBLocalTimerHandler] update RTC < 8763.020> [eDVBLocalTimerHandler] time update to 15:54:42 < 8763.020> [eDVBLocalTimerHandler] m_time_difference is -1 < 8763.020> [eDVBLocalTimerHandler] slewing Linux Time by -01 seconds < 8763.022> [eDVBChannel] getDemux cap=00 < 8763.023> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8763.023> [eDVBSectionReader] DMX_SET_FILTER pid=262 < 8763.024> [eDVBFrontend] sleep 100ms < 8763.024> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8763.025> [eDVBSectionReader] DMX_SET_FILTER pid=261 < 8763.025> [eDVBServiceRecord] RECORD service event 5 < 8763.026> [eDVBCIInterfaces] gotPMT < 8763.028> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8763.028> [eDVBSectionReader] DMX_SET_FILTER pid=264 < 8763.050> [eDVBLocalTimerHandler] diff is 0 < 8763.050> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time < 8763.050> [eDVBLocalTimerHandler] not changed < 8763.050> [eDVBChannel] getDemux cap=00 < 8763.054> [eDVBFrontend] set dynamic current limiting < 8763.124> [eDVBFrontend] setVoltage 1 < 8763.125> [eDVBFrontend] update current switch params < 8763.125> [eDVBFrontend] startTuneTimeout 5000 < 8763.125> [eDVBFrontend] setFrontend 1 < 8763.125> [eDVBFrontend] setting frontend 4 < 8763.132> [eDVBFrontend] (4)fe event: status 0, inversion off, m_tuning 1 < 8763.132> [eDVBFrontend] sleep 500ms < 8763.180> [eDVBFrontend] (4)fe event: status 7, inversion off, m_tuning 2 < 8763.211> [eDVBFrontend] (0)fe event: status 1f, inversion off, m_tuning 3 < 8763.222> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8763.222> [eDVBSectionReader] DMX_SET_FILTER pid=266 < 8763.231> [eDVBFrontend] (4)fe event: status 1f, inversion off, m_tuning 3 < 8763.231> [eDVBChannel] OURSTATE: ok < 8763.232> [eDVBLocalTimerHandler] channel 0x19eef60 running < 8763.232> [eDVBChannel] getDemux cap=00 < 8763.232> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.232> [eDVBSectionReader] DMX_SET_FILTER pid=20 < 8763.232> [eEPGCache] channel 0x19eef60 running < 8763.232> [eDVBChannel] getDemux cap=00 < 8763.232> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.232> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.233> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.233> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.233> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.233> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.233> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.233> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.233> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.233> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.234> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.234> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.234> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.234> [eDVBResourceManager] stop release channel timer < 8763.234> [eDVBChannel] getDemux cap=01 < 8763.234> [eEPGCache] next update in 2 sec < 8763.234> [eDVBResourceManager] allocate demux cap=01 < 8763.234> [eDVBResourceManager] allocating shared demux adapter=0, demux=4, source=4 < 8763.234> [eDVBServicePMTHandler] ok ... now we start!! < 8763.234> [eDVBServiceRecord] RECORD service event 5 < 8763.234> [eDVBCAService] new service 1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD < 8763.235> [eDVBCAService] add demux 4 to slot 0 service 1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD < 8763.235> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.235> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8763.235> [eDVBServiceRecord] RECORD service event 6 < 8763.235> [eDVBServiceRecord] tuned.. < 8763.235> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.235> [eDVBSectionReader] DMX_SET_FILTER pid=18 < 8763.236> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.236> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8763.322> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8763.323> [eDVBSectionReader] DMX_SET_FILTER pid=257 < 8763.371> [eDVBServiceRecord] now running: †FYI Daily‡ (300 seconds) < 8763.371> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8763.371> [eDVBSectionReader] DMX_SET_FILTER pid=18 < 8763.421> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8763.421> [eDVBSectionReader] DMX_SET_FILTER pid=264 < 8763.425> [eDVBServicePMTHandler] PATready < 8763.425> [eDVBServicePMTHandler] use pmtpid 0102 for service_id 5208 < 8763.425> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.425> [eDVBSectionReader] DMX_SET_FILTER pid=258 < 8763.426> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.426> [eDVBSectionReader] DMX_SET_FILTER pid=0 < 8763.427> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.427> [eDVBSectionReader] DMX_SET_FILTER pid=258 < 8763.428> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.428> [eDVBSectionReader] DMX_SET_FILTER pid=17 < 8763.527> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8763.528> [eDVBSectionReader] DMX_SET_FILTER pid=264 < 8763.570> [eDVBServicePMTHandler] sdt update done! < 8763.630> [eDVBServiceRecord] RECORD service event 5 < 8763.631> [eDVBCIInterfaces] gotPMT < 8763.633> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.633> [eDVBSectionReader] DMX_SET_FILTER pid=258 < 8763.635> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.635> [eDVBSectionReader] DMX_SET_FILTER pid=260 < 8763.636> [eDVBFrontend] set dynamic current limiting < 8763.710> [eDVBServiceRecord] now running: †Young Sheldon‡ (1800 seconds) < 8763.710> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 8763.711> [eDVBSectionReader] DMX_SET_FILTER pid=18 < 8763.721> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8763.722> [eDVBSectionReader] DMX_SET_FILTER pid=269 < 8763.829> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8763.829> [eDVBSectionReader] DMX_SET_FILTER pid=261 < 8763.920> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 8763.921> [eDVBSectionReader] DMX_SET_FILTER pid=258 < 8764.030> [eDVBServicePMTHandler] sdt update done! < 8764.031> [eDVBDemux] open demux /dev/dvb/adapter0/demux4 < 8764.031> [eDVBSectionReader] DMX_SET_FILTER pid=256
I will post once I get the patch built and tested.
Re: Unicable / simultaneous recordings #46
-
- PLi® Contributor
- 4,760 posts
+167
Excellent
Posted 23 September 2018 - 16:08
https://github.com/H...1223d7f5e4e6962
Patch has not worked. Started 3 simultaneous recordings. All are zero length.
< 1041.104> [RecordTimer] activating state 1 < 1041.105> [RecordTimer] Found enough free space to record < 1041.105> [RecordTimer] Filename calculated as: '/media/hdd/movie/20180923 1700 - BBC One HD - Escape to the Country' < 1041.106> [Navigation] recording service: 1:0:19:1B1D:802:2:11A0000:0:0:0: < 1041.106> [eDVBResourceManager] allocate channel.. 0802:0002 < 1041.106> [eDVBResourceManager] available channel.. 080e:0002 < 1041.106> [eDVBFrontend] opening frontend 0 < 1041.110> [eDVBFrontend] (0)tune < 1041.110> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0xe3, guard_offset 0 < 1041.110> **** Tuning JESS < 1041.110> **** frequency_mhz: 10847 < 1041.110> **** lo_mhz: 9750 < 1041.110> **** T: 997 < 1041.110> **** position: 0 < 1041.110> **** ub: 0 < 1041.110> **** mode: 0 < 1041.110> **** JESS: 70 03 e5 00 < 1041.110> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1041.110> [eDVBFrontend] prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 2 orbpos 282 system 1 modulation 2 pilot 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0 < 1041.110> [eDVBFrontend] tuning to 1211 mhz < 1041.110> [eDVBChannel] OURSTATE: tuning < 1041.110> [eDVBServicePMTHandler] allocate Channel: res 0 < 1041.110> [eDVBCIInterfaces] addPMTHandler 1:0:19:1B1D:802:2:11A0000:0:0:0: < 1041.110> [eDVBChannel] getDemux cap=00 < 1041.110> [eDVBResourceManager] allocate demux cap=00 < 1041.110> [eDVBResourceManager] allocating demux adapter=0, demux=1, source=9 fesource=0 < 1041.110> [eDVBDemux] open demux /dev/dvb/adapter0/demux1 < 1041.111> [eEPGCache] saveEventToFile epg event id c73e < 1041.112> [RecordTimer] prepare ok, waiting for begin < 1041.113> [RecordTimer] activating state 1 < 1041.114> [Trashcan] probing folders < 1041.116> [RecordTimer] Found enough free space to record < 1041.116> [RecordTimer] Filename calculated as: '/media/hdd/movie/20180923 1700 - ITV London HD - Tenable' < 1041.117> [Navigation] recording service: 1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD < 1041.117> [eDVBResourceManager] allocate channel.. 0812:0002 < 1041.117> [eDVBResourceManager] available channel.. 080e:0002 < 1041.117> [eDVBResourceManager] available channel.. 0802:0002 < 1041.117> [eDVBFrontend] opening frontend 3 < 1041.119> [eDVBFrontend] (3)tune < 1041.119> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x2156, guard_offset 0 < 1041.119> **** Tuning JESS < 1041.119> **** frequency_mhz: 11097 < 1041.119> **** lo_mhz: 9750 < 1041.119> **** T: 1247 < 1041.119> **** position: 0 < 1041.119> **** ub: 1 < 1041.120> **** mode: 0 < 1041.120> **** JESS: 70 0c df 00 < 1041.120> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1041.120> [eDVBFrontend] prepare_sat System 1 Freq 11097000 Pol 1 SR 23000000 INV 2 FEC 3 orbpos 282 system 1 modulation 2 pilot 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0 < 1041.120> [eDVBFrontend] tuning to 1421 mhz < 1041.120> [eDVBChannel] OURSTATE: tuning < 1041.120> [eDVBServicePMTHandler] allocate Channel: res 0 < 1041.120> [eDVBCIInterfaces] addPMTHandler 1:0:19:5208:812:2:11A0000:0:0:0::ITV London HD < 1041.120> [eDVBChannel] getDemux cap=00 < 1041.120> [eDVBResourceManager] allocate demux cap=00 < 1041.120> [eDVBResourceManager] allocating demux adapter=0, demux=2, source=0 fesource=3 < 1041.120> [eDVBDemux] open demux /dev/dvb/adapter0/demux2 < 1041.121> [eEPGCache] saveEventToFile epg event id 96 < 1041.121> [RecordTimer] prepare ok, waiting for begin < 1041.122> [Trashcan] Cleanup already running < 1041.122> [RecordTimer] activating state 1 < 1041.124> [RecordTimer] Found enough free space to record < 1041.125> [RecordTimer] Filename calculated as: '/media/hdd/movie/20180923 1700 - Channel 4 HD - The Great British Bake Off' < 1041.125> [Navigation] recording service: 1:0:19:52D0:814:2:11A0000:0:0:0: < 1041.125> [eDVBResourceManager] allocate channel.. 0814:0002 < 1041.125> [eDVBResourceManager] available channel.. 080e:0002 < 1041.125> [eDVBResourceManager] available channel.. 0802:0002 < 1041.125> [eDVBResourceManager] available channel.. 0812:0002 < 1041.125> [eDVBFrontend] opening frontend 4 < 1041.126> [Trashcan] found following trashcan's: ['/media/hdd/.Trash', '/media/hdd/movie/.Trash'] < 1041.126> [Trashcan] looking in trashcan /media/hdd/.Trash < 1041.127> [Trashcan] /media/hdd/.Trash: Size: 0 < 1041.127> [Trashcan] /media/hdd/.Trash: Size now: 0 < 1041.127> [Trashcan] looking in trashcan /media/hdd/movie/.Trash < 1041.128> [eDVBFrontend] (4)tune < 1041.128> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x419e, guard_offset 0 < 1041.128> **** Tuning JESS < 1041.128> **** frequency_mhz: 11126 < 1041.128> **** lo_mhz: 9750 < 1041.128> **** T: 1276 < 1041.128> **** position: 0 < 1041.128> **** ub: 2 < 1041.128> **** mode: 0 < 1041.128> **** JESS: 70 14 fc 00 < 1041.128> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1041.128> [eDVBFrontend] prepare_sat System 0 Freq 11126500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0 < 1041.128> [eDVBFrontend] tuning to 1679 mhz < 1041.128> [eDVBChannel] OURSTATE: tuning < 1041.128> [eDVBServicePMTHandler] allocate Channel: res 0 < 1041.128> [eDVBCIInterfaces] addPMTHandler 1:0:19:52D0:814:2:11A0000:0:0:0: < 1041.128> [eDVBChannel] getDemux cap=00 < 1041.129> [eDVBResourceManager] allocate demux cap=00 < 1041.129> [eDVBResourceManager] allocating demux adapter=0, demux=3, source=-1 fesource=4 < 1041.129> [eDVBDemux] open demux /dev/dvb/adapter0/demux3 < 1041.129> [eEPGCache] saveEventToFile epg event id a92d < 1041.130> [RecordTimer] prepare ok, waiting for begin < 1041.131> [Trashcan] Cleanup already running < 1041.132> [eDVBFrontend] set static current limiting < 1041.132> [eDVBFrontend] set static current limiting < 1041.132> [eDVBFrontend] set static current limiting < 1041.132> [eDVBFrontend] invalidate current switch params < 1041.132> [eDVBFrontend] invalidate current switch params < 1041.132> [eDVBFrontend] invalidate current switch params < 1041.132> [eDVBFrontend] setVoltage 1 < 1041.133> [eDVBFrontend] setVoltage 1 < 1041.134> [eDVBFrontend] setVoltage 1 < 1041.134> [eDVBFrontend] sleep 1500ms < 1041.135> [eDVBFrontend] sleep 1500ms < 1041.135> [eDVBFrontend] sleep 1500ms < 1041.141> [Trashcan] /media/hdd/movie/.Trash: Size: 19668576245 < 1041.150> [Trashcan] /media/hdd/movie/.Trash: Size now: 19668576245 < 1041.152> [Task] job Components.Task.Job name=Cleaning Trashes #tasks=1 completed with [] in None < 1042.635> [eDVBFrontend] setVoltage 2 < 1042.635> [eDVBFrontend] setVoltage 2 < 1042.636> [eDVBFrontend] setVoltage 2 < 1042.637> [eDVBFrontend] setTone 0 < 1042.637> [eDVBFrontend] setTone 0 < 1042.638> [eDVBFrontend] setTone 0 < 1042.639> [eDVBFrontend] sleep 75ms < 1042.639> [eDVBFrontend] sleep 75ms < 1042.639> [eDVBFrontend] sleep 75ms < 1042.770> [eDVBFrontend] sendDiseqc: 7003e500(?) < 1042.826> [eDVBFrontend] sendDiseqc: 700cdf00(?) < 1042.882> [eDVBFrontend] sendDiseqc: 7014fc00(?) < 1042.882> [eDVBFrontend] sleep 100ms < 1042.883> [eDVBFrontend] sleep 100ms < 1042.883> [eDVBFrontend] sleep 100ms < 1042.982> [eDVBFrontend] setVoltage 1 < 1042.983> [eDVBFrontend] update current switch params < 1042.983> [eDVBFrontend] startTuneTimeout 5000 < 1042.983> [eDVBFrontend] setFrontend 1 < 1042.983> [eDVBFrontend] setting frontend 0 < 1042.990> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1 < 1042.990> [eDVBFrontend] setVoltage 1 < 1042.991> [eDVBFrontend] setVoltage 1 < 1042.992> [eDVBFrontend] sleep 500ms < 1042.992> [eDVBFrontend] update current switch params < 1042.992> [eDVBFrontend] update current switch params < 1042.992> [eDVBFrontend] startTuneTimeout 5000 < 1042.992> [eDVBFrontend] startTuneTimeout 5000 < 1042.992> [eDVBFrontend] setFrontend 1 < 1042.992> [eDVBFrontend] setting frontend 3 < 1042.994> [eDVBFrontend] setFrontend 1 < 1042.994> [eDVBFrontend] setting frontend 4 < 1042.997> [eDVBFrontend] (3)fe event: status 0, inversion off, m_tuning 1 < 1042.998> [eDVBFrontend] (4)fe event: status 0, inversion off, m_tuning 1 < 1042.998> [eDVBFrontend] sleep 500ms < 1042.998> [eDVBFrontend] sleep 500ms < 1043.040> [eDVBFrontend] (0)fe event: status 7, inversion off, m_tuning 2 < 1043.040> [eDVBFrontend] (3)fe event: status 7, inversion off, m_tuning 2 < 1043.041> [eDVBFrontend] (4)fe event: status 7, inversion off, m_tuning 2 < 1043.492> [eDVBFrontend] set dynamic current limiting < 1043.498> [eDVBFrontend] set dynamic current limiting < 1043.498> [eDVBFrontend] set dynamic current limiting < 1047.983> [eDVBChannel] OURSTATE: failed, retune < 1047.983> [eDVBFrontend] (0)tune < 1047.983> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0xe3, guard_offset 0 < 1047.983> **** Tuning JESS < 1047.983> **** frequency_mhz: 10847 < 1047.983> **** lo_mhz: 9750 < 1047.983> **** T: 997 < 1047.983> **** position: 0 < 1047.983> **** ub: 0 < 1047.983> **** mode: 0 < 1047.983> **** JESS: 70 03 e5 00 < 1047.983> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1047.983> [eDVBFrontend] prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 2 orbpos 282 system 1 modulation 2 pilot 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0 < 1047.983> [eDVBFrontend] tuning to 1211 mhz < 1047.983> [eDVBChannel] OURSTATE: tuning < 1047.983> [eDVBServicePMTHandler] tune failed. < 1047.983> [eDVBServiceRecord] RECORD service event 1 < 1047.983> [eDVBServiceRecord] record failed to tune < 1047.983> [eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!! < 1047.983> [eDVBServicePMTHandler] incorrect namespace. expected: 11a0000 current: ffffffff < 1047.983> [eDVBServicePMTHandler] incorrect transport_stream_id. expected: 802 current: ffffffff < 1047.983> [eDVBServicePMTHandler] incorrect namespace. expected: 2 current: ffffffff < 1047.984> [eDVBFrontend] set static current limiting < 1047.984> [eDVBFrontend] invalidate current switch params < 1047.984> [eDVBFrontend] set sequence pos 3 < 1047.984> [eDVBFrontend] setVoltage 2 < 1047.984> [eDVBFrontend] setTone 0 < 1047.985> [eDVBFrontend] sleep 75ms < 1047.992> [eDVBChannel] OURSTATE: failed, retune < 1047.992> [eDVBFrontend] (3)tune < 1047.992> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x2156, guard_offset 0 < 1047.992> **** Tuning JESS < 1047.992> **** frequency_mhz: 11097 < 1047.992> **** lo_mhz: 9750 < 1047.992> **** T: 1247 < 1047.992> **** position: 0 < 1047.992> **** ub: 1 < 1047.992> **** mode: 0 < 1047.992> **** JESS: 70 0c df 00 < 1047.992> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1047.992> [eDVBFrontend] prepare_sat System 1 Freq 11097000 Pol 1 SR 23000000 INV 2 FEC 3 orbpos 282 system 1 modulation 2 pilot 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0 < 1047.992> [eDVBFrontend] tuning to 1421 mhz < 1047.992> [eDVBChannel] OURSTATE: tuning < 1047.992> [eDVBServicePMTHandler] tune failed. < 1047.992> [eDVBServiceRecord] RECORD service event 1 < 1047.992> [eDVBServiceRecord] record failed to tune < 1047.993> [eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!! < 1047.993> [eDVBServicePMTHandler] incorrect namespace. expected: 11a0000 current: ffffffff < 1047.993> [eDVBServicePMTHandler] incorrect transport_stream_id. expected: 812 current: ffffffff < 1047.993> [eDVBServicePMTHandler] incorrect namespace. expected: 2 current: ffffffff < 1047.993> [eDVBChannel] OURSTATE: failed, retune < 1047.993> [eDVBFrontend] (4)tune < 1047.993> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x419e, guard_offset 0 < 1047.993> **** Tuning JESS < 1047.993> **** frequency_mhz: 11126 < 1047.993> **** lo_mhz: 9750 < 1047.993> **** T: 1276 < 1047.993> **** position: 0 < 1047.993> **** ub: 2 < 1047.993> **** mode: 0 < 1047.993> **** JESS: 70 14 fc 00 < 1047.993> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1047.993> [eDVBFrontend] prepare_sat System 0 Freq 11126500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0 < 1047.993> [eDVBFrontend] tuning to 1679 mhz < 1047.993> [eDVBChannel] OURSTATE: tuning < 1047.993> [eDVBServicePMTHandler] tune failed. < 1047.993> [eDVBServiceRecord] RECORD service event 1 < 1047.993> [eDVBServiceRecord] record failed to tune < 1047.993> [eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!! < 1047.993> [eDVBServicePMTHandler] incorrect namespace. expected: 11a0000 current: ffffffff < 1047.993> [eDVBServicePMTHandler] incorrect transport_stream_id. expected: 814 current: ffffffff < 1047.993> [eDVBServicePMTHandler] incorrect namespace. expected: 2 current: ffffffff < 1047.993> [eDVBFrontend] set static current limiting < 1047.993> [eDVBFrontend] set static current limiting < 1047.993> [eDVBFrontend] invalidate current switch params < 1047.993> [eDVBFrontend] invalidate current switch params < 1047.993> [eDVBFrontend] set sequence pos 3 < 1047.993> [eDVBFrontend] set sequence pos 3 < 1047.993> [eDVBFrontend] setVoltage 2 < 1047.994> [eDVBFrontend] setVoltage 2 < 1047.995> [eDVBFrontend] setTone 0 < 1047.995> [eDVBFrontend] setTone 0 < 1047.996> [eDVBFrontend] sleep 75ms < 1047.996> [eDVBFrontend] sleep 75ms < 1048.116> [eDVBFrontend] sendDiseqc: 7003e500(?) < 1048.172> [eDVBFrontend] sendDiseqc: 700cdf00(?) < 1048.228> [eDVBFrontend] sendDiseqc: 7014fc00(?) < 1048.228> [eDVBFrontend] sleep 100ms < 1048.228> [eDVBFrontend] sleep 100ms < 1048.228> [eDVBFrontend] sleep 100ms < 1048.328> [eDVBFrontend] setVoltage 1 < 1048.329> [eDVBFrontend] setVoltage 1 < 1048.329> [eDVBFrontend] setVoltage 1 < 1048.330> [eDVBFrontend] update current switch params < 1048.330> [eDVBFrontend] update current switch params < 1048.330> [eDVBFrontend] update current switch params < 1048.330> [eDVBFrontend] startTuneTimeout 5000 < 1048.330> [eDVBFrontend] startTuneTimeout 5000 < 1048.330> [eDVBFrontend] startTuneTimeout 5000 < 1048.330> [eDVBFrontend] setFrontend 1 < 1048.330> [eDVBFrontend] setting frontend 0 < 1048.330> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1 < 1048.330> [eDVBFrontend] setFrontend 1 < 1048.330> [eDVBFrontend] setting frontend 3 < 1048.330> [eDVBFrontend] setFrontend 1 < 1048.330> [eDVBFrontend] setting frontend 4 < 1048.330> [eDVBFrontend] sleep 500ms < 1048.330> [eDVBFrontend] (3)fe event: status 0, inversion off, m_tuning 1 < 1048.330> [eDVBFrontend] (4)fe event: status 0, inversion off, m_tuning 1 < 1048.330> [eDVBFrontend] sleep 500ms < 1048.331> [eDVBFrontend] sleep 500ms < 1048.380> [eDVBFrontend] (0)fe event: status 7, inversion off, m_tuning 2 < 1048.381> [eDVBFrontend] (3)fe event: status 7, inversion off, m_tuning 2 < 1048.381> [eDVBFrontend] (4)fe event: status 7, inversion off, m_tuning 2 < 1048.835> [eDVBFrontend] set dynamic current limiting < 1048.835> [eDVBFrontend] set dynamic current limiting < 1048.835> [eDVBFrontend] set dynamic current limiting < 1053.330> [eDVBChannel] OURSTATE: failed, retune < 1053.330> [eDVBFrontend] (0)tune < 1053.330> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0xe3, guard_offset 0 < 1053.331> **** Tuning JESS < 1053.331> **** frequency_mhz: 10847 < 1053.331> **** lo_mhz: 9750 < 1053.331> **** T: 997 < 1053.331> **** position: 0 < 1053.331> **** ub: 0 < 1053.331> **** mode: 0 < 1053.331> **** JESS: 70 03 e5 00 < 1053.331> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1053.331> [eDVBFrontend] prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 2 orbpos 282 system 1 modulation 2 pilot 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0 < 1053.331> [eDVBFrontend] tuning to 1211 mhz < 1053.331> [eDVBChannel] OURSTATE: tuning < 1053.331> [eDVBServicePMTHandler] tune failed. < 1053.331> [eDVBServiceRecord] RECORD service event 1 < 1053.331> [eDVBServiceRecord] record failed to tune < 1053.331> [eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!! < 1053.331> [eDVBServicePMTHandler] incorrect namespace. expected: 11a0000 current: ffffffff < 1053.331> [eDVBServicePMTHandler] incorrect transport_stream_id. expected: 802 current: ffffffff < 1053.331> [eDVBServicePMTHandler] incorrect namespace. expected: 2 current: ffffffff < 1053.331> [eDVBChannel] OURSTATE: failed, retune < 1053.331> [eDVBFrontend] (3)tune < 1053.331> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x2156, guard_offset 0 < 1053.331> **** Tuning JESS < 1053.331> **** frequency_mhz: 11097 < 1053.331> **** lo_mhz: 9750 < 1053.331> **** T: 1247 < 1053.331> **** position: 0 < 1053.331> **** ub: 1 < 1053.331> **** mode: 0 < 1053.331> **** JESS: 70 0c df 00 < 1053.331> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1053.331> [eDVBFrontend] prepare_sat System 1 Freq 11097000 Pol 1 SR 23000000 INV 2 FEC 3 orbpos 282 system 1 modulation 2 pilot 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0 < 1053.331> [eDVBFrontend] tuning to 1421 mhz < 1053.331> [eDVBChannel] OURSTATE: tuning < 1053.331> [eDVBServicePMTHandler] tune failed. < 1053.332> [eDVBServiceRecord] RECORD service event 1 < 1053.332> [eDVBServiceRecord] record failed to tune < 1053.332> [eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!! < 1053.332> [eDVBServicePMTHandler] incorrect namespace. expected: 11a0000 current: ffffffff < 1053.332> [eDVBServicePMTHandler] incorrect transport_stream_id. expected: 812 current: ffffffff < 1053.332> [eDVBServicePMTHandler] incorrect namespace. expected: 2 current: ffffffff < 1053.332> [eDVBChannel] OURSTATE: failed, retune < 1053.332> [eDVBFrontend] (4)tune < 1053.332> [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x419e, guard_offset 0 < 1053.332> **** Tuning JESS < 1053.332> **** frequency_mhz: 11126 < 1053.332> **** lo_mhz: 9750 < 1053.332> **** T: 1276 < 1053.332> **** position: 0 < 1053.332> **** ub: 2 < 1053.332> **** mode: 0 < 1053.332> **** JESS: 70 14 fc 00 < 1053.332> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff < 1053.332> [eDVBFrontend] prepare_sat System 0 Freq 11126500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0 < 1053.332> [eDVBFrontend] tuning to 1679 mhz < 1053.332> [eDVBChannel] OURSTATE: tuning < 1053.332> [eDVBServicePMTHandler] tune failed. < 1053.332> [eDVBServiceRecord] RECORD service event 1 < 1053.332> [eDVBServiceRecord] record failed to tune < 1053.332> [eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!! < 1053.332> [eDVBServicePMTHandler] incorrect namespace. expected: 11a0000 current: ffffffff < 1053.332> [eDVBServicePMTHandler] incorrect transport_stream_id. expected: 814 current: ffffffff < 1053.332> [eDVBServicePMTHandler] incorrect namespace. expected: 2 current: ffffffff < 1053.332> [eDVBFrontend] set static current limiting < 1053.332> [eDVBFrontend] set static current limiting < 1053.332> [eDVBFrontend] set static current limiting
Re: Unicable / simultaneous recordings #47
-
- PLi® Contributor
- 4,760 posts
+167
Excellent
Posted 23 September 2018 - 16:13
Just to avoid confusion...
< 1041.106> [eDVBResourceManager] allocate channel.. 0802:0002 < 1041.106> [eDVBResourceManager] available channel.. 080e:0002
0x0802 is the TSID to be recorded.
0x080e is the TSID of the currently playing service.
Re: Unicable / simultaneous recordings #48
-
- PLi® Contributor
- 6,194 posts
+261
Excellent
Posted 23 September 2018 - 16:57
Thanks!
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Unicable / simultaneous recordings #49
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 23 September 2018 - 17:10
https://github.com/H...1223d7f5e4e6962
Patch has not worked. Started 3 simultaneous recordings. All are zero length.
No idea how this can be solved, for sure it's some kind of racing, somebody with the proper hardware and knowledge should have a look.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Unicable / simultaneous recordings #50
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 23 September 2018 - 17:40
I a fifo queue is created to send the command I think that we don't have to set a delay, I rather think that we have a bus collision since we send 2 or 3 commands exactly at the same time to it.
No, both Enigma2 and the drivers sequences them.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Unicable / simultaneous recordings #51
-
- PLi® Core member
- 70,851 posts
+1,832
Excellent
Posted 23 September 2018 - 17:47
Appearently not in this case?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Unicable / simultaneous recordings #52
-
- PLi® Contributor
- 4,760 posts
+167
Excellent
Posted 24 September 2018 - 08:16
Is there any sort of workaround we can implement for the time being?
Re: Unicable / simultaneous recordings #53
-
- PLi® Contributor
- 4,760 posts
+167
Excellent
Posted 25 September 2018 - 00:27
So looks like the only way is to throw Unicable LNBs in the dustbin and switch back to Universal. Which also means there is no point having FBC tuners either.
Re: Unicable / simultaneous recordings #54
-
- PLi® Core member
- 70,851 posts
+1,832
Excellent
Posted 25 September 2018 - 00:43
I doubt that, there are solutions but someone with time and knowledge should dive into it. I guess that would probably be Athoik or Erik, and I know Erik usually doesn't have free time during the week.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Unicable / simultaneous recordings #55
-
- PLi® Core member
- 10,379 posts
+354
Excellent
Posted 25 September 2018 - 05:32
Unicable recordings are always on the same satellite/polarization can be different?
Edited by Dimitrij, 25 September 2018 - 05:33.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Unicable / simultaneous recordings #56
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 25 September 2018 - 05:48
Is it worthwhile to see if VTi has the same problems with FBC-Unicable?
Re: Unicable / simultaneous recordings #57
-
- PLi® Contributor
- 2,524 posts
+64
Good
Posted 25 September 2018 - 07:53
Unicable recordings are always on the same satellite/polarization can be different?
Huevos and I have unicable only for 28.2 services. For testing/confirming purposes, the issue happens when recording BBC One HD and Channel 5 HD. 10847 V and 10964 H. In real life usage they could be anything and random. We have been testing on those two services as it is a guaranteed way to invoke the bug.
Simultaneous recording on same frequency is fine for me using FBC and unicable 2 LNB.
Re: Unicable / simultaneous recordings #58
-
- PLi® Contributor
- 4,760 posts
+167
Excellent
Posted 25 September 2018 - 08:02
In the tests the services are on one satellite.
But the Unicable II/JESS standard allows for up to 4 satellites over the single cable.
Re: Unicable / simultaneous recordings #59
-
- PLi® Contributor
- 4,760 posts
+167
Excellent
Posted 25 September 2018 - 08:27
I have tested starting the timers with a one second pause between timers and so far for me this works 100%.
Is it possible someone can explore that option?
Re: Unicable / simultaneous recordings #60
-
- PLi® Contributor
- 2,524 posts
+64
Good
Posted 25 September 2018 - 13:17
We had a commit some time ago to cater for the following situation:
Timer A ends 20:00 (inclusive of offsets)
Timer B starts at 20:00 (inclusive of offsets).
Until the commit was made, this would always clash when in reality timers were one after the other. Does anybody remember it? If so, can you post a link please? Thanks
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
