OK... dan zit er niets op dan even wachten... niet alleen voor Buienradar maar ook een fix voor de anderen, kreeg een crash bij Motregenradar.
OpenPLi Enigma2 crash log
crashdate=zo jul 19 17:13:23 2020
compiledate=Jul 4 2020
skin=PLi-FullHD/skin.xml
sourcedate=2020-06-28
branch=release-7.3
rev=2995bb9
component=enigma2, signal
stbmodel=hd51
stbmodel=hd51
kernelcmdline=brcm_cma=520M@248M brcm_cma=192M@768M root=/dev/mmcblk0p7 rootsubdir=linuxrootfs2 kernel=/dev/mmcblk0p4 rw rootwait hd51_4.boxmode=12 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
nimsockets=NIM Socket 0:
imageissue=openpli 7.3-release %h
ADD Peer osmio4k=osmio4k.local:8001
ADD Peer osmio4k=osmio4k.local:8001
ADD Peer osminiplus=osminiplus.local:8001
REMOVE Peer osmio4k
REMOVE Peer osminiplus
REMOVE Peer hd51
REMOVE Peer osmio4k
REMOVE Peer hd51
ADD Peer osminiplus=osminiplus.local:8001
ADD Peer osmio4k=osmio4k.local:8001
ADD Peer osmio4k=osmio4k.local:8001
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0xA4E68]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB6C79C60]
/lib/libc.so.6(gsignal) [0xB6C7894C]
/lib/libc.so.6(abort) [0xB6C79DC4]
/usr/lib/libstdc++.so.6(_ZN9__gnu_cxx27__verbose_terminate_handlerEv) [0xB62BE784]
/usr/lib/libstdc++.so.6(n/a) [0xB62BC12C]
-------FATAL SIGNAL
dmesg
<6>[ 0.000000] Booting Linux on physical CPU 0x0
<5>[ 0.000000] Linux version 4.10.12 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Sat Jul 4 23:48:11 CEST 2020
<6>[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[ 0.000000] CPU: div instructions available: patching division code
<6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[ 0.000000] OF: fdt:Machine model: BCM97251SSV
<6>[ 0.000000] cma: Reserved 520 MiB at 0x000000000f800000
<6>[ 0.000000] cma: Reserved 192 MiB at 0x0000000030000000
<3>[ 0.000000] cma: Failed to reserve 440 MiB
<3>[ 0.000000] cma: Failed to reserve 192 MiB
<6>[ 0.000000] Memory policy: Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 262144
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0917d80, node_mem_map cedf4000
<7>[ 0.000000] Normal zone: 1728 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
<6>[ 0.000000] percpu: Embedded 14 pages/cpu @cedb5000 s26764 r8192 d22388 u57344
<7>[ 0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
<5>[ 0.000000] Kernel command line: brcm_cma=520M@248M brcm_cma=192M@768M root=/dev/mmcblk0p7 rootsubdir=linuxrootfs2 kernel=/dev/mmcblk0p4 rw rootwait hd51_4.boxmode=12 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 298520K/1048576K available (6629K kernel code, 361K rwdata, 1816K rodata, 352K init, 223K bss, 20968K reserved, 729088K cma-reserved, 65536K highmem)
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc06818d0 (6631 kB)
<5>[ 0.000000] .init : 0xc0876000 - 0xc08ce000 ( 352 kB)
<5>[ 0.000000] .data : 0xc08ce000 - 0xc0928578 ( 362 kB)
<5>[ 0.000000] .bss : 0xc092a000 - 0xc0961cb4 ( 224 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] Build-time adjustment of leaf fanout to 32.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
<6>[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
<6>[ 0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
<6>[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[ 0.000011] Switching to timer-based delay loop, resolution 37ns
<6>[ 0.000290] Console: colour dummy device 80x30
<6>[ 0.000310] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[ 0.000319] pid_max: default: 32768 minimum: 301
<6>[ 0.000428] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000434] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000887] CPU: Testing write buffer coherency: ok
<6>[ 0.001135] CPU0: update cpu_capacity 1024
<6>[ 0.001141] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.001357] Setting up static identity map for 0x8440 - 0x8498
<6>[ 0.003359] smp: Bringing up secondary CPUs ...
<6>[ 0.004082] CPU1: update cpu_capacity 1024
<6>[ 0.004085] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[ 0.004149] smp: Brought up 1 node, 2 CPUs
<6>[ 0.004158] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[ 0.004163] CPU: All CPU(s) started in SVC mode.
<6>[ 0.004562] devtmpfs: initialized
<6>[ 0.010872] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[ 0.011070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.011089] futex hash table entries: 512 (order: 3, 32768 bytes)
<6>[ 0.027114] NET: Registered protocol family 16
<6>[ 0.027587] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[ 0.032470] cpuidle: using governor ladder
<6>[ 0.036407] cpuidle: using governor menu
<6>[ 0.045555] No ATAGs?
<6>[ 0.045648] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.045657] hw-breakpoint: maximum watchpoint size is 8 bytes.
<5>[ 0.060604] SCSI subsystem initialized
<7>[ 0.061295] libata version 3.00 loaded.
<6>[ 0.061516] usbcore: registered new interface driver usbfs
<6>[ 0.061563] usbcore: registered new interface driver hub
<6>[ 0.061606] usbcore: registered new device driver usb
<6>[ 0.061667] Linux cec interface: v0.10
<6>[ 0.061881] Linux video capture interface: v2.00
<6>[ 0.061956] pps_core: LinuxPPS API ver. 1 registered
<6>[ 0.061961] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 0.061984] PTP clock support registered
<6>[ 0.062476] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.063416] clocksource: Switched to clocksource arch_sys_counter
<5>[ 0.063603] FS-Cache: Loaded
<6>[ 0.069695] NET: Registered protocol family 2
<6>[ 0.070057] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.070099] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.070194] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.070285] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.070315] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.070457] NET: Registered protocol family 1
<6>[ 0.070849] RPC: Registered named UNIX socket transport module.
<6>[ 0.070854] RPC: Registered udp transport module.
<6>[ 0.070857] RPC: Registered tcp transport module.
<6>[ 0.070861] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.070869] PCI: CLS 0 bytes, default 64
<6>[ 0.071893] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[ 0.073345] workingset: timestamp_bits=14 max_order=18 bucket_order=4
<5>[ 0.073928] NFS: Registering the id_resolver key type
<5>[ 0.073949] Key type id_resolver registered
<5>[ 0.073953] Key type id_legacy registered
<6>[ 0.073964] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.074268] fuse init (API version 7.26)
<6>[ 0.076111] bounce: pool size: 64 pages
<6>[ 0.076152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[ 0.076179] io scheduler noop registered
<6>[ 0.076185] io scheduler deadline registered
<6>[ 0.076211] io scheduler cfq registered (default)
<6>[ 0.076571] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
<6>[ 0.076891] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
<6>[ 0.077285] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
<6>[ 0.077904] brcm-cma brcm-cma.0: Added CMA device @ PA=0xf800000 LEN=0x20800000
<6>[ 0.078501] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc000000
<6>[ 0.112776] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.114347] console [ttyS0] disabled
<6>[ 0.114386] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
<6>[ 0.805056] console [ttyS0] enabled
<6>[ 0.809097] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
<6>[ 0.818443] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
<6>[ 0.834717] brd: module loaded
<6>[ 0.841609] loop: module loaded
<3>[ 0.845594] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
<4>[ 0.854760] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
<6>[ 0.860830] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[ 0.878063] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
<6>[ 0.887044] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[ 0.896190] scsi host0: brcm-ahci
<6>[ 0.899786] scsi host1: brcm-ahci
<6>[ 0.903284] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
<6>[ 0.911218] ata2: DUMMY
<6>[ 0.913679] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[ 0.920828] libphy: Fixed MDIO Bus: probed
<6>[ 0.925251] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<6>[ 0.943177] libphy: bcmgenet MII bus: probed
<6>[ 0.970123] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
<6>[ 0.975974] e1000e: Copyright© 1999 - 2015 Intel Corporation.
<6>[ 0.999969] ehci-brcm: EHCI BRCM driver
<6>[ 1.003934] ehci-brcm f0470300.ehci: EHCI Host Controller
<6>[ 1.009370] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
<6>[ 1.027069] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
<6>[ 1.039178] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
<6>[ 1.045649] hub 1-0:1.0: USB hub found
<6>[ 1.049439] hub 1-0:1.0: 1 port detected
<6>[ 1.053650] ehci-brcm f0470500.ehci: EHCI Host Controller
<6>[ 1.059079] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
<6>[ 1.076768] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
<6>[ 1.089180] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
<6>[ 1.095539] hub 2-0:1.0: USB hub found
<6>[ 1.099324] hub 2-0:1.0: 1 port detected
<6>[ 1.103455] ohci-brcm: OHCI BRCM driver
<6>[ 1.107455] ohci-brcm f0470400.ohci: BRCM OHCI controller
<6>[ 1.112880] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
<6>[ 1.120536] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
<6>[ 1.182569] hub 3-0:1.0: USB hub found
<6>[ 1.186353] hub 3-0:1.0: 1 port detected
<6>[ 1.190505] ohci-brcm f0470600.ohci: BRCM OHCI controller
<6>[ 1.195932] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
<6>[ 1.196188] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<6>[ 1.197253] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
<6>[ 1.197258] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 1.198400] ata1.00: configured for UDMA/133
<5>[ 1.198756] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
<6>[ 1.235797] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
<5>[ 1.255827] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
<5>[ 1.263518] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[ 1.268819] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 1.274235] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 1.279052] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 1.279216] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 1.297756] hub 4-0:1.0: USB hub found
<6>[ 1.301548] hub 4-0:1.0: 1 port detected
<6>[ 1.305689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.312252] ehci-pci: EHCI PCI platform driver
<6>[ 1.316768] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.322974] ohci-pci: OHCI PCI platform driver
<6>[ 1.327853] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[ 1.333204] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
<6>[ 1.340929] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
<6>[ 1.349510] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
<6>[ 1.356176] hub 5-0:1.0: USB hub found
<3>[ 1.359963] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[ 1.367248] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[ 1.372584] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
<6>[ 1.380128] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[ 1.388593] hub 6-0:1.0: USB hub found
<6>[ 1.392378] hub 6-0:1.0: 2 ports detected
<6>[ 1.396750] usbcore: registered new interface driver uas
<6>[ 1.402168] usbcore: registered new interface driver usb-storage
<6>[ 1.408268] usb 1-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 1.415325] mousedev: PS/2 mouse device common for all mice
<6>[ 1.421292] i2c /dev entries driver
<6>[ 1.425037] IR NEC protocol handler initialized
<6>[ 1.429586] IR RC5(x/sz) protocol handler initialized
<6>[ 1.434668] IR RC6 protocol handler initialized
<6>[ 1.439208] IR JVC protocol handler initialized
<6>[ 1.443749] IR Sony protocol handler initialized
<6>[ 1.448380] IR SANYO protocol handler initialized
<6>[ 1.453095] IR Sharp protocol handler initialized
<6>[ 1.457807] IR MCE Keyboard/mouse protocol handler initialized
<6>[ 1.463650] IR XMP protocol handler initialized
<6>[ 1.467177] usb 2-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 1.474825] smssdio: Siano SMS1xxx SDIO driver
<6>[ 1.479278] smssdio: Copyright Pierre Ossman
<6>[ 1.483975] sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.490169] sdhci: Copyright© Pierre Ossman
<6>[ 1.494536] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 1.503618] hub 1-1:1.0: USB hub found
<6>[ 1.507542] hub 1-1:1.0: 4 ports detected
<6>[ 1.533184] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[ 1.540776] hidraw: raw HID events driver © Jiri Kosina
<6>[ 1.546391] usbcore: registered new interface driver usbhid
<6>[ 1.551983] usbhid: USB HID core driver
<6>[ 1.556031] sda: sda1
<6>[ 1.558838] NET: Registered protocol family 17
<5>[ 1.558901] Key type dns_resolver registered
<6>[ 1.559026] ThumbEE CPU extension supported.
<5>[ 1.559035] Registering SWP/SWPB emulation handler
<6>[ 1.566228] ALSA device list:
<6>[ 1.566230] No soundcards found.
<3>[ 1.566301] Warning: unable to open an initial console.
<5>[ 1.592868] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 1.597914] Freeing unused kernel memory: 352K
<4>[ 1.602394] This architecture does not have kernel memory protection.
<6>[ 1.685943] mmc0: new high speed MMC card at address 0001
<6>[ 1.691783] mmcblk0: mmc0:0001 004GE0 3.69 GiB
<6>[ 1.696472] mmcblk0boot0: mmc0:0001 004GE0 partition 1 2.00 MiB
<6>[ 1.702551] mmcblk0boot1: mmc0:0001 004GE0 partition 2 2.00 MiB
<6>[ 1.708602] mmcblk0rpmb: mmc0:0001 004GE0 partition 3 512 KiB
<4>[ 1.716458] Alternate GPT is invalid, using primary GPT.
<6>[ 1.721842] mmcblk0: p1 p2 p3 p4 p5 p6 p7
<6>[ 1.737090] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 1.809198] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
<5>[ 1.811170] random: fast init done
<6>[ 1.914224] usb 1-1.3: new high-speed USB device number 4 using ehci-brcm
<6>[ 2.319786] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: nodelalloc
<4>[ 2.508701] hd51_1: loading out-of-tree module taints kernel.
<6>[ 2.515783] usbcore: registered new interface driver tpm
<4>[ 4.657965] hd51: module_layout: kernel tainted.
<4>[ 4.662646] Disabling lock debugging due to kernel taint
<6>[ 7.382633] Console: switching to colour frame buffer device 160x45
<6>[ 7.677022] input: dreambox remote control (native) as /devices/virtual/input/input0
<6>[ 7.685111] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>[ 7.695594] dvbdev: DVB: registering new adapter (dvb0)
<6>[ 7.704925] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>[ 7.714062] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
<6>[ 7.978901] input: front panel as /devices/virtual/input/input2
<6>[ 8.001504] Registered IR keymap rc-cec
<6>[ 8.005697] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
<6>[ 8.014254] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
<6>[ 8.065733] EXT4-fs (mmcblk0p7): re-mounted. Opts: data=ordered
<6>[ 8.477287] Console: switching to colour dummy device 80x30
<6>[ 9.288183] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[ 9.297535] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[ 10.913444] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>[ 12.240792] NET: Registered protocol family 10
<6>[ 12.246449] Segment Routing with IPv6
<6>[ 12.344356] Installing knfsd (copyright © 1996 okir@monad.swb.de).
<5>[ 14.506488] random: crng init done
<6>[ 17.157756] platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
<6>[ 21.842880] input: Sundtek Ltd. Remote Control as /devices/virtual/input/input4
<6>[ 21.851761] platform dvb0.0: DVB: registering adapter 0 frontend 3 (vtuner)...
plugin.py 81.56KB
40 downloads
It seems like I'm still alive, but I feel like I'm already frying in hell 
