Jump to content


Photo

Mut@nt HD51 Network and software update

Started by machare, 10 Nov 2018 18:13

  • Please log in to reply
25 replies to this topic

#1 machare

  • Member
  • 6 posts

0
Neutral

Posted 10 November 2018 - 18:13

My HD51 is running OpenPli multiboot 6.2  mode 12

 

1)  The network is configured with a fixed IP address.  It does not like to stay active.  Is there anything that I should do to ensure that the network is always active?

 

2) Software update shows that there are 223 packages to update.  I can display a list of these packages.  When I select 'Update and reboot' nothing is updated. I get the next two screens with 'Please wait...'.  Nothing more is shown. The box reboots and the network adapter is not active.  The hardware and network connection are fine. No similar problems with other builds. 

 

3) I used telnet to update the box. There are now 222 packages to update.  Is there a later version of OpenPli multiboot that I could flash?


Re: Mut@nt HD51 Network and software update #2 machare

  • Member
  • 6 posts

0
Neutral

Posted 10 November 2018 - 18:20

PS. The build I am using is dated 2018-11-05


Re: Mut@nt HD51 Network and software update #3 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 10 November 2018 - 19:26

The box reboots and the network adapter is not active. The hardware and network connection are fine.


Network adapter is not active but network connections are fine?? That cannot be. Is it only in the GUI shown as disabled?

Regarding the updates. Are errors shown during installation?
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Mut@nt HD51 Network and software update #4 teo1966

  • Senior Member
  • 1,106 posts

+10
Neutral

Posted 10 November 2018 - 20:41

set dhcp to yes and try to restart enigma2


Edited by teo1966, 10 November 2018 - 20:42.

VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: Mut@nt HD51 Network and software update #5 WanWizard

  • PLi® Core member
  • 68,586 posts

+1,738
Excellent

Posted 10 November 2018 - 21:55

We know there is a display issue in cases where Enigma starts faster than the DHCP server provides an IP address. This is fixed in develop and will be part of the upcoming OpenPLi 7.

 

Restarting Enigma will fix the display issue, as when Enigma starts again, the network has already received its DHCP address.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Mut@nt HD51 Network and software update #6 machare

  • Member
  • 6 posts

0
Neutral

Posted 11 November 2018 - 14:35

Thank you for the replies.  The network is not started even if I don't use DHCP.   Maybe OpenPLi 7 will be better.


Re: Mut@nt HD51 Network and software update #7 WanWizard

  • PLi® Core member
  • 68,586 posts

+1,738
Excellent

Posted 11 November 2018 - 14:43

Nothing has changed in that code for ages.

 

And you are contradicting yourself. How can you check for updates or telnet into the box if the network is "not active" or "not started"?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Mut@nt HD51 Network and software update #8 ims

  • PLi® Core member
  • 13,624 posts

+212
Excellent

Posted 11 November 2018 - 17:27

222 packages for update ? Is it not better reflash it ?


Kdo nic nedělá, nic nezkazí!

Re: Mut@nt HD51 Network and software update #9 Erik Slagter

  • PLi® Core member
  • 46,951 posts

+541
Excellent

Posted 11 November 2018 - 18:13

Most definitely yes.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Mut@nt HD51 Network and software update #10 littlesat

  • PLi® Core member
  • 56,269 posts

+691
Excellent

Posted 12 November 2018 - 07:18

Just install an image online via multiboot... done within a (few) minute(s) with your remote....

Edited by littlesat, 12 November 2018 - 07:18.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W

Re: Mut@nt HD51 Network and software update #11 Robinson

  • Senior Member
  • 2,616 posts

+30
Good

Posted 15 December 2018 - 17:50

Hello,

 

I have a problem completing an online update on my HD51.

Menu - Information - System shows:

 

Build date: 29 Oct.

Last update: 10 Dec.

Enigma version: 4 Sept.

 

Online update log:

Collected errors:
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * check_conflicts_for: The following packages conflict with openpli-bootlogo:
 * check_conflicts_for: 	satdreamgr-bootlogo * 
 * calculate_dependencies_for: Cannot satisfy the following dependencies for gstreamer1.0-plugin-dvbmediasink:
 * 	gstreamer1.0 (>= 1.12.4+git17604+505a24f) * 	libc6 (>= 2.24) * 	libelf1 (>= 0.166) * 
 * opkg_solver_upgrade: Package Not not installed.
 * calculate_dependencies_for: Cannot satisfy the following dependencies for iptvsubparser:
 * 	libc6 (>= 2.24) * 
 * opkg_solver_upgrade: Package Not not installed.
 * opkg_solver_upgrade: Package Not not installed.
 * calculate_dependencies_for: Cannot satisfy the following dependencies for libtuxtxt32bpp0:
 * 	libc6 (>= 2.26) * 	libfreetype6 (>= 2.8.1) * 	libtuxtxt0 (>= 2.0+git69+4ba7e86) * 
Not selecting libudfread0 0.0.0+git26+50d41b1 as installing it would break existing dependencies.
Upgrading openpli-bootlogo from 20181029-r0.353 to 20181210-r0.408 on root.
Not selecting libc6 2.24 as installing it would break existing dependencies.
Not selecting libc6 2.24 as installing it would break existing dependencies.
Not selecting libelf1 0.168 as installing it would break existing dependencies.
Not selecting libelf1 0.168 as installing it would break existing dependencies.
Package 3rd-party-feed-configs is already installed on root.
Package tzdata is already installed on root.
Not selecting libdvdread4 5.0+git287+5ec4095 as installing it would break existing dependencies.
Upgrading iptvsubparser from 1.0+git3+789b900-r0.0 to 1.0+git4+eb3c248-r0.0 on root.
Not selecting libc6 2.24 as installing it would break existing dependencies.
Not selecting libc6 2.24 as installing it would break existing dependencies.
Package enigma2-plugin-extensions-openwebif is already installed on root.
Not selecting libdvdnav4 5.0+git793+0e0ed2a as installing it would break existing dependencies.
Not selecting libcap2 2.24 as installing it would break existing dependencies.
Package python-ipaddress is already installed on /media/mmcblk0p7.
Package python-ipaddress is already installed on /media/mmcblk0p7.
Package softcam-support is already installed on root.
Package volatile-media is already installed on root.
xargs: opkg: exited with status 255; aborting

What is wrong, please?


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: Mut@nt HD51 Network and software update #12 Erik Slagter

  • PLi® Core member
  • 46,951 posts

+541
Excellent

Posted 15 December 2018 - 19:56

Yes we know of this issue. We're looking at it. It's seems to be caused by a recent BSP update from Zgemma.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Mut@nt HD51 Network and software update #13 WanWizard

  • PLi® Core member
  • 68,586 posts

+1,738
Excellent

Posted 15 December 2018 - 21:44

This is not our image?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Mut@nt HD51 Network and software update #14 Robinson

  • Senior Member
  • 2,616 posts

+30
Good

Posted 15 December 2018 - 21:57

It is OpenPLi in Slot1.

Other slots: OpenATV, SatdreamGr, OpenPLi.


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: Mut@nt HD51 Network and software update #15 WanWizard

  • PLi® Core member
  • 68,586 posts

+1,738
Excellent

Posted 15 December 2018 - 22:10

The output above is not from (a standard) OpenPLi. There is no satdreamgr-bootlogo in OpenPLi.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Mut@nt HD51 Network and software update #16 Robinson

  • Senior Member
  • 2,616 posts

+30
Good

Posted 15 December 2018 - 22:41

I have not added any bootlogos to OpenPLi. However Satdreamgr_5 image is installed in Slot_3 so maybe it has something to do with it?

 

Attached Files


Edited by Robinson, 15 December 2018 - 22:44.

ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: Mut@nt HD51 Network and software update #17 WanWizard

  • PLi® Core member
  • 68,586 posts

+1,738
Excellent

Posted 15 December 2018 - 22:44

I can't comment on what you're doing. ;)

 

I can only see that the output you posted refers to files not present in OpenPLi.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Mut@nt HD51 Network and software update #18 twol

  • Senior Member
  • 444 posts

+15
Neutral

Posted 16 December 2018 - 09:43

I have not added any bootlogos to OpenPLi. However Satdreamgr_5 image is installed in Slot_3 so maybe it has something to do with it?

If Satdreamgr is based on OpenPli, then could it be that on an image flash or settings restore the  "system" has used the other images settings backup - it is why for multiboot receivers, I tend to keep image backup settings on different media and I also have code to not list these backups for restore from certain images.   


Edited by twol, 16 December 2018 - 09:44.

Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 

Re: Mut@nt HD51 Network and software update #19 Robinson

  • Senior Member
  • 2,616 posts

+30
Good

Posted 16 December 2018 - 17:03

Well, it may be possible so it is not recommended to have OpenPLi and Satdreamgr in the flash at the same time?


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: Mut@nt HD51 Network and software update #20 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 16 December 2018 - 18:25

In different partitions/slots it’s no problem. But if somehow packages from satgr are installed in PLI image, then this is a problem and not recommended at all.
Maybe really the backup is the problem.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Back to [EN] Enduser support

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support